| Date |
Text |
| 2023-07-26 09:41:04 | RESIDENTIAL (R3)RE-ROOF SIXTH BUILDING REVIEW COMMENTS |
| | CODE: FBC 7TH EDITION (2020) AND CITY AMENDMENTS. |
| | PERMIT #23051022 |
| | 333 MURRAY RD |
| | |
| | PREVIOUS COMMENT FOR FLAT ROOF: |
| | 2- NEW FLAT ROOF NOA 22-0706.08 WAS SUBMITTED. NEED TO |
| | CLEARLY MARK/IDENTIFY WHICH ASSEMBLY IS GOING TO BE |
| | INSTALLED. IF SELECTED ASSEMBLY DOESN'T MEET THE DESIGN |
| | PRESSURES FOR ALL ROOF ZONES, THEN SIGNED AND SEALED |
| | RAS 117 CALCULATIONS ARE REQUIRED. SEE GENERAL |
| | LIMITATION #7 ON LAST PAGE OF NOA SUBMITTED. |
| | |
| | RESPONSE: |
| | NEW FLORIDA PRODUCT APPROVAL FL16717-R13 SUBMITTED. THE |
| | DESIGN PRESSURES OF -112.5 PSF OF SELECTED ASSEMBLY |
| | W107 DON'T MEET THE DESIGN PRESSURES FOR ALL ROOF ZONES |
| | #3 FOR THIS TWO STORY BUILDING AS REQUIRED BY |
| | SEC.R301.2.1 FBC-RESIDENTIAL. NEED TO PROVIDE SIGNED |
| | AND SEALED RAS 117 CALCULATIONS AS REQUIRED BY |
| | LIMITATION #5.7.2 OF PRODUCT APPROVAL SUBMITTED. |
| | |
| | |
| | PREVIOUS COMMENT: |
| | 4- NEW ROOFING UNDERLAYMENT FLORIDA PRODUCT APPROVAL |
| | FL5259-R39 SUBMITTED DOESN'T IDENTIFY WHICH APPROVED |
| | ASSEMBLY IS GOING TO BE INSTALLED. CLEARLY MARK WHICH |
| | APPROVED ASSEMBLY FROM SECTION 6.1 OF PRODUCT APPROVAL |
| | SUBMITTED. |
| | SEC. 107.2.1 CITY AMENDMENTS. |
| | |
| | RESPONSE: |
| | UNDERLAYMENT SELECTED IS POLYSTICK TU MAX AND SELECTED |
| | APPROVED ASSEMBLY 6.3.12 ON PAGE 9 OF 9 IS FOR CONCRETE |
| | DECKS. THIS HOUSE DOESN'T HAVE A CONCRETE DECK. NEED TO |
| | SELECT ASSEMBLY FOR DECK TYPE THAT MATCHES THIS HOUSE. |
| | SEC. 107.2.1 CITY AMENDMENTS. |
| | |
| | PLEASE FEEL FREE TO CONTACT ME IF YOU HAVE ANY |
| | QUESTIONS REGARDING THESE COMMENTS, |
| | JULIO GOMEZ |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | BUILDING DIVISION |
| | (561)805-6712 |
| | [email protected] |
| | |
