| Date |
Text |
| 2022-07-28 11:04:20 | JONATHAN BROOKS JR. |
| | BUILDING PLANS EXAMINER |
| | WORK HOURS: MONDAY - FRIDAY 7:00 AM TO 3:00 PM |
| | PHONE (561) 805-6656 |
| | EMAIL: [email protected] |
| | |
| | 1ST REVIEW: FBC 2020 7TH EDITION |
| | FBC = FLORIDA BUILDING CODE, 7TH EDITION (2020) |
| | FBC B = FBC BUILDING |
| | FBC R = FBC RESIDENTIAL |
| | FBC EB = FBC EXISTING BUILDING |
| | FBC A = FBC ACCESSIBILITY |
| | FBC EC = FBC ENERGY CONSERVATION |
| | WPB A = CITY OF WEST PALM BEACH AMENMENTS TO THE FBC |
| | RESULTS: DENIED |
| | ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT |
| | TO RESUBMIT, YOU CAN EITHER DROP OFF YOUR SUBMITTAL AT |
| | CITY HALL, OR UPLOAD CORRECTIONS TO PROJECTDOX. |
| | |
| | 1. FBC R 301 FAC9N-3 FLORIDA STATE PRODUCT APPROVAL |
| | FL11559-R7 IS INCOMPLETE, PROVIDE THE FOLLOWING |
| | ADDITIONAL INFORMATION: COVER SHEET |
| | (WWW.FLORIDABUILDING.ORG, THIS WILL INCLUDE THE CODE |
| | VERSION, PRODUCT APPROVAL NUMBER, STATUS, GENERAL |
| | INFORMATION ABOUT THE PRODUCT). |
| | 2. FBC R 301 FAC9N-3 SUBMITTED FLORIDA DBPR PRODUCT |
| | APPROVAL FL11559.3-R7 COVERS MULTIPLE FASTENER SPACING |
| | TO MEET DESIGN UPLIFT PRESSURES. PLEASE SELECT CORRECT |
| | FASTENER PATTERN & SPACING FROM TABLE ?A? PAGE #5 OF |
| | THE EVALUATION REPORT THAT MEET OR EXCEED THE MINIMUM |
| | DESIGN PRESSURE REQUIREMENT FOR ZONE 3 EXPOSURE |
| | CATEGORY D AREAS. |
| | 3. PROVIDE A COMPLETE SET OF 2020 CODE VERSION PRODUCT |
| | APPROVALS/NOA'S FOR THE PROPOSED ROOF UNDERLAYMENT TO |
| | BE USED. INCLUDE COVER PAGE, EVALUATION REPORTS AND |
| | INSTALLATION INSTRUCTIONS FOR SYSTEM USED. ALL |
| | APPLICABLE DETAILS AND ATTACHMENTS MUST BE CLEARLY |
| | IDENTIFIED ON THE PRODUCT APPROVAL DRAWINGS. DETAILS |
| | AND ATTACHMENTS NOT SPECIFICALLY COVERED IN PRODUCT |
| | APPROVALS WILL NEED SITE-SPECIFIC ENGINEERING |
| | 4. 61G15-23.001. F.A.C. (B). ENGINEERING SPECIFICATIONS |
| | AND CALCULATIONS. AN INDEX SHEET SHALL BE USED AND |
| | SHALL BE SIGNED, DATED AND SEALED BY EACH PROFESSIONAL |
| | ENGINEER WHO IS IN RESPONSIBLE CHARGE OF ANY PORTION OF |
| | THE ENGINEERING SPECIFICATIONS OR CALCULATIONS. THE |
| | INDEX SHEET MUST BE SIGNED, DATED AND SEALED BY THOSE |
| | PROFESSIONAL ENGINEERS IN RESPONSIBLE CHARGE OF THE |
| | PRODUCTION AND PREPARATION OF EACH SECTION OF THE |
| | ENGINEERING SPECIFICATIONS OR CALCULATIONS, WITH |
| | SUFFICIENT INFORMATION ON THE INDEX SHEET SO THAT THE |
| | USER WILL BE AWARE OF EACH PORTION OF THE |
| | SPECIFICATIONS OR CALCULATIONS FOR WHICH EACH |
| | PROFESSIONAL ENGINEER IS RESPONSIBLE. |
| | |
| | PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED |
| | MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS. |
| | |
