| Plan Review Notes For Permit 22030297 |
| Permit Number |
22030297 |
|
| Review Stop |
B |
| Sequence Number |
1 |
|
| Notes |
| Date |
Text |
| 2022-04-13 17:06:53 | REMODEL UNITS | | | REVIEWED BY ROGER MCPHERSON | | | 561-805-6716 | | | [email protected] | | | CODE USED FOR REVIEW - 2020 FBC WITH WPB CHAPTER 1 | | | AMENDMENT | | | | | | CORRECTIONS NEEDED - | | | | | | 1) ACCESSIBLE RESTROOM - PLEASE SHOW THE MIRROR HEIGHT | | | DIMENSION FROM THE FLOOR TO THE "REFLECTIVE SURFACE" | | | FBC A 603.3 MIRRORS. | | | MIRRORS LOCATED ABOVE LAVATORIES OR COUNTERTOPS SHALL | | | BE INSTALLED WITH THE BOTTOM EDGE OF THE REFLECTING | | | SURFACE 40 INCHES (1015 MM) MAXIMUM ABOVE THE FINISH | | | FLOOR OR GROUND. | | | | | | 2) PLEASE SHOW THAT THE DOORS HAVE A 32" CLEAR OPENING | | | - FBC A 404.2.3 CLEAR WIDTH. | | | DOOR OPENINGS SHALL PROVIDE A CLEAR WIDTH OF 32 INCHES | | | (815 MM) MINIMUM. CLEAR OPENINGS OF DOORWAYS WITH | | | SWINGING DOORS SHALL BE MEASURED BETWEEN THE FACE OF | | | THE DOOR AND THE STOP, WITH THE DOOR OPEN 90 DEGREES. | | | | | | 3) DRAWINGS A200 AND A201 SHOW SHOWER GRAB BAR HEIGHTS | | | TO THE CENTER OF THE GRAB BAR - SHOULD BE SHOWN TO THE | | | TOP OF THE GRIPPING SURFACE - FBC A 609.4 POSITION OF | | | GRAB BARS. | | | GRAB BARS SHALL BE INSTALLED IN A HORIZONTAL POSITION, | | | 33 INCHES (840 MM) MINIMUM AND 36 INCHES (915 MM) | | | MAXIMUM ABOVE THE FINISH FLOOR MEASURED TO THE TOP OF | | | THE GRIPPING SURFACE | | | | | | 4) PLEASE SHOW THE SHOWER BENCH DETAILS AND DIMENSIONS | | | TO COMPLY WITH FBC A 610.3 | | | | | | 5) A SEPARATE PERMIT IS REQUIRED FOR THE PARKING LOT | | | RESTRIPING - PLEASE ACKNOWLEDGE THIS. |
|
