| Date |
Text |
| 2019-02-13 09:28:17 | PLAN |
| | REVIEW COMMENTS |
| | |
| | 2ND REVIEW: FBC SIXTH EDITION (2017) |
| | ROBERT MCDOUGAL, CBO |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | (561) 805-6714 |
| | [email protected] |
| | |
| | DENIED BY BUILDING |
| | PLEASE ADDRESS THE ITEMS NOTED BELOW: |
| | |
| | 1) (COMMENT FROM FIRST REVIEW.) THE SIGNED AND SEALED |
| | ALUMINUM FENCE DRAWING IS REQUIRED TO HAVE THE |
| | ENGINEER'S DIGITAL SIGNATURE WHEN IT IS SUBMITTED |
| | ELECTRONICALLY. FS 471 & FAC 61G15-23.003 IF THE |
| | DRAWINGS ARE SUBMITTED ON PAPER, THEN THE ENGINEER'S |
| | ORIGINAL HANDWRITTEN SIGNATURE IS REQUIRED ACROSS THEIR |
| | SEAL. |
| | |
| | THE PAPER ENGINEER'S DRAWING DOCUMENT THAT WAS |
| | SUBMITTED HAS A COPIED SIGNATURE. 61G15-23.003 |
| | PROCEDURES FOR PHYSICALLY SIGNING AND SEALING PLANS, |
| | SPECIFICATIONS, REPORTS OR OTHER DOCUMENTS. |
| | ENGINEERING PLANS, SPECIFICATIONS, REPORTS OR OTHER |
| | DOCUMENTS WHICH MUST BE SIGNED, DATED AND SEALED IN |
| | ACCORDANCE WITH THE PROVISIONS OF SECTION 471.025, |
| | F.S., AND RULE 61G15-23.001, F.A.C. MUST BE PHYSICALLY |
| | SIGNED, DATED AND SEALED AS PROVIDED HEREIN BY THE |
| | PROFESSIONAL ENGINEER IN RESPONSIBLE CHARGE. |
| | (1) THE LICENSEE SHALL SIGN BY HAND AN ORIGINAL OF THE |
| | LICENSEE?S SIGNATURE ON EACH PAGE REQUIRED TO BE |
| | SEALED. A SCANNED, FACSIMILE, DIGITALLY CREATED OR |
| | COPIED IMAGE OF THE LICENSEE?S SIGNATURE SHALL NOT BE |
| | USED. |
| | (2) THE LICENSEE MUST THEN USE A WET SEAL, A DIGITALLY |
| | CREATED SEAL, OR AN EMBOSSING SEAL PLACED PARTIALLY |
| | OVERLAPPING THE LICENSEE?S SIGNATURE ON EACH PAGE |
| | REQUIRED TO BE SEALED. THE PLACEMENT OF THE SEAL SHALL |
| | NOT RENDER THE SIGNATURE ILLEGIBLE. |
| | (COMMENT FROM FIRST REVIEW.) THE SIGNED AND SEALED |
| | ALUMINUM FENCE DRAWING IS REQUIRED TO HAVE THE |
| | ENGINEER'S DIGITAL SIGNATURE WHEN IT IS SUBMITTED |
| | ELECTRONICALLY. FS 471 & FAC 61G15-23.003 IF THE |
| | DRAWINGS ARE SUBMITTED ON PAPER, THEN THE ENGINEER'S |
| | ORIGINAL HANDWRITTEN SIGNATURE IS REQUIRED ACROSS THEIR |
| | SEAL. |
| | |
| | 2) THE ENGINEER IS REQUIRED TO IDENTIFY THE PROJECT BY |
| | ADDRESS OR BY LOT NUMBER, BLOCK NUMBER, SECTION OR |
| | SUBDIVISION AND CITY OR COUNTY. FAC 61G15-23.001 THE |
| | ENGINEER NEEDS TO IDENTIFY THE PROJECT IN THE TITLE |
| | BLOCK OF THE DRAWING. |
| | |
