| Date |
Text |
| 2018-12-24 13:09:50 | CODES IN EFFECT: |
| | FBC = FLORIDA BUILDING CODE 2017 6TH EDITION |
| | WPB FBC = WEST PALM BEACH AMENDMENTS TO THE FBC 2017 |
| | 6TH ED, CHAPTER 1. |
| | FBC EC = FLORIDA BUILDING CODE ENERGY CONSERVATION 2017 |
| | 6TH EDITION |
| | FBC EX = FLORIDA BUILDING CODE EXISTING BUILDING 2017 |
| | 6TH EDITION |
| | FBC RE = FLORIDA RESIDENTIAL CODE 2017 6TH EDITION |
| | NEC = NFPA 70 2014 EDITION, NATIONAL ELECTRICAL CODE |
| | FS = FLORIDA STATUTES |
| | |
| | ELECTRICAL REVIEW STATUS: DENIED, SEE COMMENTS BELOW. |
| | |
| | PREVIOUS COMMENTS THAT HAVE BEEN ADDRESSED |
| | SATISFACTORILY ARE MARKED AS CORRECTED. PREVIOUS |
| | COMMENTS THAT HAVE NOT BEEN ADDRESSED SATISFACTORILY |
| | HAVE ADDITIONAL COMMENTS IN PARENTHESES. ANY NEW |
| | COMMENTS WILL BE LISTED AFTER PREVIOUS COMMENTS. |
| | |
| | 1. PER THE WPB AMENDMENTS TO THE FBC, PLAN IS REQUIRED |
| | TO BE SIGNED BY PERSON RESPONSIBLE FOR THE DESIGN. |
| | PROVIDE CORRECTION. FS 481.229; WPB FBC 107.1, 107.2.1, |
| | 107.3.5.1.2 (PER FLORIDA ADMINISTRATIVE CODE, RULE |
| | 61G15-23.001, THE PROVIDED DOCUMENT IS NOT ACCEPTABLE. |
| | SEE RULE BELOW.) |
| | |
| | 61G15-23.001 SIGNATURE, DATE AND SEAL SHALL BE AFFIXED. |
| | (1) A PROFESSIONAL ENGINEER SHALL SIGN, DATE AND SEAL: |
| | (A) ALL FINAL PLANS, PRINTS, SPECIFICATIONS, REPORTS, |
| | OR OTHER DOCUMENTS PREPARED OR ISSUED BY THE LICENSEE |
| | AND BEING FILED FOR PUBLIC RECORD; |
| | (B) ALL FINAL DOCUMENTS PROVIDED TO THE OWNER OR THE |
| | OWNER?S REPRESENTATIVE. |
| | (2) ADDITIONAL FINAL AND NON-FINAL DOCUMENTS. |
| | (A) A PROFESSIONAL ENGINEER MAY SIGN, DATE AND SEAL |
| | DOCUMENTS REQUIRED BY ANY PUBLIC ENTITY OR ANY |
| | PROVISION OF CONTRACT WHICH REQUIRES THE SIGNING, |
| | DATING AND SEALING OF ADDITIONAL ORIGINAL DOCUMENTS. |
| | (B) A PROFESSIONAL ENGINEER SHALL NOT SIGN, DATE AND |
| | SEAL ANY DOCUMENTS WHICH ARE NOT FINAL DOCUMENTS UNLESS |
| | THE PROFESSIONAL ENGINEER STATES ANY LIMITATIONS ON THE |
| | USE OF THOSE DOCUMENTS ON THE FACE OF THOSE DOCUMENTS |
| | BY USING TERMS SUCH AS ?PRELIMINARY,? ?FOR REVIEW |
| | ONLY,? ?NOT FOR CONSTRUCTION,? OR ANY OTHER SUITABLE |
| | STATEMENT WHICH DENOTES THAT THE DOCUMENTS ARE FOR |
| | LIMITED USE, ARE NOT FINAL AND ARE NOT INTENDED FOR |
| | PERMIT, CONSTRUCTION, OR BIDDING PURPOSES. |
| | (3) A PROFESSIONAL ENGINEER MAY ONLY SIGN, DATE AND |
| | SEAL ENGINEERING PLANS, PRINTS, SPECIFICATIONS, REPORTS |
| | OR OTHER DOCUMENTS IF THAT PROFESSIONAL ENGINEER WAS IN |
| | RESPONSIBLE CHARGE, AS THAT TERM IS DEFINED IN |
| | SUBSECTION 61G15-18.011(1), F.A.C., OF THE PREPARATION |
| | AND PRODUCTION OF THE ENGINEERING DOCUMENT AND THE |
| | PROFESSIONAL ENGINEER HAS THE EXPERTISE IN THE |
| | ENGINEERING DISCIPLINE USED IN PRODUCING THE |
| | ENGINEERING DOCUMENT(S) IN QUESTION. PROFESSIONAL |
| | ENGINEERS WORKING FOR LOCAL, STATE OR FEDERAL |
| | GOVERNMENT AGENCIES SHALL LEGIBLY INDICATE THEIR NAME |
| | AND LICENSE NUMBER, AND SHALL INDICATE THE NAME AND |
| | ADDRESS OF THE AGENCY ON ALL DOCUMENTS THAT ARE |
| | REQUIRED TO BE SIGNED, DATED AND SEALED. |
| | (4) ADDITIONAL REQUIREMENTS FOR PLANS OR PRINTS, |
| | ENGINEERING SPECIFICATIONS AND CALCULATIONS, AND |
| | ENGINEERING REPORTS OR OTHER DOCUMENTS. WHEN AN |
| | ENGINEER SIGNS, DATES AND SEALS ANY OF THE FOLLOWING |
| | TYPES OF DOCUMENTS PLANS OR PRINTS UNDER THE PROVISIONS |
| | OF SECTION 471.025, F.S., AND SUBSECTION (1) OF THIS |
| | RULE, THE FOLLOWING ADDITIONAL INFORMATION MUST BE |
| | INCLUDED: |
| | (A) PLANS AND PRINTS. EVERY SHEET WITHIN THE PLANS AND |
| | PRINTS MUST BE SIGNED, DATED AND SEALED BY THE |
| | PROFESSIONAL ENGINEER IN RESPONSIBLE CHARGE. |
| | 1. A TITLE BLOCK SHALL BE USED ON EACH SHEET OF PLANS |
| | OR PRINTS AND SHALL CONTAIN THE PRINTED NAME, ADDRESS, |
| | AND LICENSE NUMBER OF THE ENGINEER WHO HAS SIGNED, |
| | DATED AND SEALED THE PLANS OR PRINTS. |
| | 2. IF THE ENGINEER SIGNING, DATING AND SEALING |
| | ENGINEERING PLANS OR PRINTS IS PRACTICING THROUGH A |
| | DULY AUTHORIZED ENGINEERING BUSINESS; THE TITLE BLOCK |
| | SHALL CONTAIN THE PRINTED NAME, ADDRESS AND CERTIFICATE |
| | OF AUTHORIZATION NUMBER OF THE ENGINEERING BUSINESS. |
| | (B) ENGINEERING SPECIFICATIONS AND CALCULATIONS. AN |
| | INDEX SHEET SHALL BE USED AND SHALL BE SIGNED, DATED |
| | AND SEALED BY EACH PROFESSIONAL ENGINEER WHO IS IN |
| | RESPONSIBLE CHARGE OF ANY PORTION OF THE ENGINEERING |
| | SPECIFICATIONS OR CALCULATIONS. |
| | 1. THE INDEX SHEET MUST BE SIGNED, DATED AND SEALED BY |
| | THOSE PROFESSIONAL ENGINEERS IN RESPONSIBLE CHARGE OF |
| | THE PRODUCTION AND PREPARATION OF EACH SECTION OF THE |
| | ENGINEERING SPECIFICATIONS OR CALCULATIONS, WITH |
| | SUFFICIENT INFORMATION ON THE INDEX SHEET SO THAT THE |
| | USER WILL BE AWARE OF EACH PORTION OF THE |
| | SPECIFICATIONS OR CALCULATIONS FOR WHICH EACH |
| | PROFESSIONAL ENGINEER IS RESPONSIBLE. |
| | 2. THE INDEX SHEET SHALL INCLUDE AT A MINIMUM: |
| | A. THE PRINTED NAME, ADDRESS AND LICENSE NUMBER OF EACH |
| | ENGINEER IN RESPONSIBLE CHARGE OF THE PRODUCTION OF ANY |
| | PORTION OF THE CALCULATIONS OR SPECIFICATIONS. |
| | B. IF THE ENGINEER SIGNING, DATING AND SEALING |
| | CALCULATIONS OR SPECIFICATIONS IS PRACTICING THROUGH A |
| | DULY AUTHORIZED ENGINEERING BUSINESS; THE PRINTED NAME, |
| | ADDRESS AND CERTIFICATE OF AUTHORIZATION NUMBER OF THE |
| | ENGINEERING BUSINESS. |
| | C. IDENTIFICATION OF THE PROJECT, BY ADDRESS OR BY LOT |
| | NUMBER, BLOCK NUMBER, SECTION OR SUBDIVISION AND CITY |
| | OR COUNTY. |
| | D. IDENTIFICATION OF THE APPLICABLE BUILDING CODE AND |
| | CHAPTER(S) AND FLORIDA FIRE PREVENTION CODE, WHEN |
| | APPLICABLE, THAT THE DESIGN IS INTENDED TO MEET. |
| | E. IDENTIFICATION OF ANY COMPUTER PROGRAM USED FOR |
| | ENGINEERING THE SPECIFICATIONS OR CALCULATIONS. |
| | (C) ENGINEERING REPORTS OR OTHER DOCUMENTS. |
| | 1. A SIGNATURE PAGE OR COVER LETTER SHALL BE USED AND |
| | SHALL BE SIGNED, DATED AND SEALED BY EACH PROFESSIONAL |
| | ENGINEER WHO IS IN RESPONSIBLE CHARGE OF ANY PORTION OF |
| | THE REPORT WITH SUFFICIENT INFORMATION PROVIDED SO THAT |
| | THE USER WILL BE AWARE OF EACH PORTION FOR WHICH EACH |
| | PROFESSIONAL ENGINEER IS RESPONSIBLE. |
| | 2. IF THE ENGINEER SIGNING, DATING AND SEALING AN |
| | ENGINEERING REPORT OR OTHER DOCUMENT IS PRACTICING |
| | THROUGH A DULY AUTHORIZED ENGINEERING BUSINESS, THE |
| | PRINTED NAME, ADDRESS AND CERTIFICATE OF AUTHORIZATION |
| | NUMBER OF THE ENGINEERING BUSINESS SHALL BE PLACED ON |
| | THE SIGNATURE PAGE OR COVER LETTER. |
| | (D) THE DATE THAT THE SIGNATURE AND SEAL IS AFFIXED AS |
| | PROVIDED HEREIN SHALL BE ENTERED ON SAID PLANS, PRINTS, |
| | SPECIFICATION, REPORTS OR OTHER DOCUMENTS IMMEDIATELY |
| | ADJACENT TO THE SIGNATURE OF THE PROFESSIONAL ENGINEER. |
| | RULEMAKING AUTHORITY 471.008, 471.025 FS. LAW |
| | IMPLEMENTED 471.025, 471.033(1)(A), (E), (J) FS. |
| | HISTORY?NEW 1-8-80, AMENDED 6-23-80, FORMERLY |
| | 21H-23.01, 21H-23.001, AMENDED 4-1-97, 2-5-04, 8-8-05, |
| | 11-16-09, 2-2-12, 11-3-15, 10-26-16. |
| | |
| | |
| | END OF COMMENTS. |
| | |
| | PLEASE NOTE: SUBMITTAL OF ADDITIONAL AND/OR REVISED |
| | MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS. WHEN |
| | RESUBMITTING, IT IS HELPFUL TO PROVIDE A RESPONSE |
| | LETTER ADDRESSING EACH ITEM ALONG WITH THE CITY |
| | RESUBMITTAL FORM. ADDITIONALLY, INSERT CORRECTED PAGES |
| | INTO THE ORIGINAL SUBMITTAL AND REMOVE THE PREVIOUSLY |
| | REVIEWED SHEETS. ONE COPY OF THE PREVIOUSLY REVIEWED |
| | SHEETS SHOULD REMAIN IN PACKAGE AND BE MARKED OLD |
| | SHEETS. |
| | |
| | SINCERELY, |
| | |
| | JOHN PEARSON |
| | ELECTRICAL PLANS EXAMINER |
| | 561-805-6746 |
| | [email protected] |
| | |
