| Plan Review Notes For Permit 18021046 |
| Permit Number |
18021046 |
|
| Review Stop |
R |
| Sequence Number |
4 |
|
| Notes |
| Date |
Text |
| 2018-10-18 17:44:27 | 1) PROVIDE PRODUCT APPROVAL (2 COPIES) AS REQUIRED BY | | | FAC 61G20-3.001 FOR: | | | NOTE: THIS MAY BE SUBMITTED LATER AS DEFERRED | | | SUBMITTAL, BUT BEFORE INSTALLATION (NO FEES). | | | | | | A) FLAT ROOF. AND, CLEARLY MARK WHICH APPROVED ASSEMBLY | | | IS GOING TO BE INSTALLED TO VERIFY COMPLIANCE WITH THE | | | DESIGN PRESSURES OF SEC. 1609 FBC. NOTE: IF THE | | | SELECTED ASSEMBLY DOESN'T MEET THE DESIGN PRESSURES FOR | | | ALL ROOF ZONES, THEN SIGNED AND SEALED RAS 117 | | | CALCULATIONS ARE REQUIRED. | | | | | | RESPONSE: | | | NO PRODUCT APPROVAL WAS SUBMITTED. NEED PRODUCT | | | APPROVAL AND SPECIFIC ASSEMBLY TO BE INSTALLED. | | | | | | B) ROOF TILE ADHESIVE REFERENCED IN ROOF TILE NOA | | | 15-0915.09 SUBMITTED. ROOF TILE ADHESIVE RTA-1 | | | SUBMITTED IS NOT THE ONE REFERENCED IN THE NOA FOR CLAY | | | TILE. AND, CLEARLY MARK PADDY SIZE. | | | | | | 2) DESIGNER OF RECORD TO REVIEW AND APPROVE IN WRITING | | | (NOT SIGNING AND SEALING) ABOVE PRODUCT APPROVALS AS | | | REQUIRED BY SEC. 107.3.4.1 CITY AMENDMENTS. | | | | | | | | | APPROVED: | | | CLAY TILE NOA 15-0915.09 |
|
