| Date |
Text |
| 2017-07-14 11:20:03 | RESIDENTIAL (R3) RE-ROOF BUILDING REVIEW COMMENTS. |
| | CODE: FBC 5TH EDITION (2014). |
| | |
| | 1- RAS 117 CALCULATIONS SUBMITTED: |
| | PROFESSIONAL ENGINEER'S SEAL AND SIGNATURE NEED TO |
| | COMPLY WITH THE REQUIREMENTS OF 61G15-23.002 AND |
| | 61G15-23.003 OF FLORIDA ADMINISTRATIVE CODE. THE SIZE |
| | OF THE SEAL IS NON-COMPLIANT AND THE SIGNATURE NEEDS TO |
| | BE ORIGINAL. PLEASE SEE COPY OF THE REQUIREMENTS BELOW |
| | AND FORWARD TO ENGINEER TO AVOID UNNECESSARY DELAYS. |
| | RESUBMIT 2 COPIES OF CALCULATIONS THAT ARE PROPERLY |
| | SEALED AND SIGNED. |
| | |
| | 61G15-23.002 SEALS ACCEPTABLE TO THE BOARD. |
| | (1) ONLY THE FOLLOWING SEALS ARE AUTHORIZED TO BE USED |
| | PURSUANT TO SECTION 471.025, F.S.; |
| | (A) WET SEALS: A WET SEAL IS ANY SEAL PHYSICALLY |
| | APPLIED TO A PRINTED DOCUMENT CAPABLE OF LEAVING A |
| | PERMANENT INK REPRESENTATION OR OTHER FORM OF OPAQUE |
| | PERMANENT IMPRESSION ON THE PRINTED DOCUMENT THAT |
| | COMPLIES WITH SUBSECTION 61G15-23.002(2), F.A.C.; |
| | (B) EMBOSSING SEALS: AN EMBOSSING SEAL IS ANY SEAL |
| | PHYSICALLY APPLIED TO A PRINTED DOCUMENT CAPABLE OF |
| | LEAVING A PERMANENT CRIMPED REPRESENTATION OR OTHER |
| | FORM OF PERMANENT RAISED IMPRESSION ON THE PRINTED |
| | DOCUMENT THAT COMPLIES WITH SUBSECTION 61G15-23.002(2), |
| | F.A.C.; OR |
| | (C) DIGITALLY CREATED SEALS: A DIGITALLY CREATED SEAL |
| | IS ANY SEAL CREATED AS PART OF THE DOCUMENT AND NOT |
| | PHYSICALLY APPLIED THAT IS AN OPAQUE PERMANENT |
| | REPRESENTATION THAT COMPLIES WITH SUBSECTION |
| | 61G15-23.002(2), F.A.C. |
| | (2) WET SEALS, EMBOSSING SEALS AND DIGITALLY CREATED |
| | SEALS SHALL BE A MINIMUM OF 1-7/8 INCHES IN DIAMETER |
| | AND SHALL BE OF A DESIGN SIMILAR TO THOSE SET FORTH IN |
| | SUBSECTIONS (A), (B) AND (C) BELOW. |
| | (A) THE SEAL MUST CONTAIN THE LICENSEE?S GIVEN NAME, |
| | THE LICENSEE?S LICENSE NUMBER IMMEDIATELY PRECEDED BY |
| | THE DESIGNATION ?NO?, THE WORDS ?PROFESSIONAL ENGINEER? |
| | AND THE WORDS ?STATE OF FLORIDA? SIMILAR TO THAT |
| | DEPICTED HERE: |
| | |
| | |
| | 61G15-23.003 PROCEDURES FOR PHYSICALLY SIGNING AND |
| | SEALING PLANS, SPECIFICATIONS, REPORTS OR OTHER |
| | DOCUMENTS. |
| | ENGINEERING PLANS, SPECIFICATIONS, REPORTS OR OTHER |
| | DOCUMENTS WHICH MUST BE SIGNED, DATED AND SEALED IN |
| | ACCORDANCE WITH THE PROVISIONS OF SECTION 471.025, |
| | F.S., AND RULE 61G15-23.001, F.A.C. MAY BE PHYSICALLY |
| | SIGNED, DATED AND SEALED AS PROVIDED HEREIN BY THE |
| | PROFESSIONAL ENGINEER IN RESPONSIBLE CHARGE. |
| | (1) THE LICENSEE SHALL SIGN BY HAND AN ORIGINAL OF THE |
| | LICENSEE?S SIGNATURE ON EACH PAGE REQUIRED TO BE |
| | SEALED. A SCANNED, FACSIMILE, DIGITALLY CREATED OR |
| | COPIED IMAGE OF THE LICENSEE?S SIGNATURE SHALL NOT BE |
| | USED. |
| | (2) THE LICENSEE MUST THEN USE A WET SEAL, A DIGITALLY |
| | CREATED SEAL, OR AN EMBOSSING SEAL PLACED PARTIALLY |
| | OVERLAPPING THE LICENSEE?S SIGNATURE ON EACH PAGE |
| | REQUIRED TO BE SEALED. THE PLACEMENT OF THE SEAL SHALL |
| | NOT RENDER THE SIGNATURE ILLEGIBLE. |
| | RULEMAKING AUTHORITY 471.025(1), 668.006 FS. LAW |
| | IMPLEMENTED 471.025 FS. HISTORY?NEW 8-18-98, AMENDED |
| | 9-4-05, 5-6-09, 1-5-12, 8-20-12, 12-10-13, 11-3-15. |
| | |
| | |
| | 2- THE FLAT ROOF REVISED SQUARE FOOTAGE IS 8 SQUARES |
| | INSTEAD OF 1 SQUARE. VALUATION WAS UPDATED TO $8, 705 |
| | USING THE AVERAGE PRICES OF "MARSHALL VALUATION |
| | SERVICE" AS REQUIRED BY SEC. 109.3 CITY AMENDMENTS. THE |
| | PERMIT FEE BALANCE IS $234.25. |
| | |
| | IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT |
| | JULIO GOMEZ |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | BUILDING DIVISION |
| | (561)805-6712 |
| | [email protected]. |
