| Date |
Text |
| 2017-03-30 07:46:55 | ****CORRECTIONS**** |
| | |
| | SAMANTHA HILL |
| | BUILDING PLANS EXAMINER |
| | [email protected] |
| | 561-805-6724 |
| | |
| | 1. FBC 107, DESIGNER OF RECORD IS TO REVIEW PRODUCT |
| | APPROVALS AND DELEGATED ENGINEERING PRIOR TO SUBMITTAL. |
| | |
| | 2ND REVIEW, NOT ADDRESSED. THE DESIGNER OF RECORD IS TO |
| | REVIEW THE PRODUCT APPROVALS, EITHER WITH A SHOP |
| | DRAWING REVIEW STAMP OR A LETTER. A REFERENCE TO A TYPE |
| | OF PRODUCT ON THE PLAN, UNLESS IT SPECIFICALLY |
| | REFERENCES THE MANUFACTURER AND PRODUCT, DOES NOT |
| | DEMONSTRATE THAT DOR HAS REVIEWED THE SPECIFIC PRODUCT |
| | AND METHOD OF INSTALLATION PROPOSED. |
| | |
| | 2.OK |
| | |
| | 3. FBC 107, WHEN RESUBMITTING APPLICANT IS TO PREPARE |
| | TWO IDENTICAL COLLATED SETS OF PERMIT DOCUMENTS FOR |
| | PERMIT ISSUANCE. |
| | |
| | OLD SHEETS ARE TO BE RETAINED IN THE SUBMITTAL, REMOVED |
| | FROM THE TWO PERMIT ISSUE SETS, AND THOSE DOCUMENTS |
| | SHOULD BE MARKED "VOID" OR "OLD SHEETS". |
| | |
| | THE TWO COLLATED PERMIT SETS ARE TO INCLUDE ANY |
| | DOCUMENTS PREVIOUSLY SUBMITTED AND REVIEWED AS WELL AS |
| | THE NEW DOCUMENTS WHICH SHOULD ADDRESS ALL COMMENTS. |
| | |
| | 2ND REVIEW, NOT CLEAR WHAT SHOULD BE REVIEWED, NOT |
| | CLEAR WHAT IS PROPOSED TO BE ISSUED. NOTHING WAS MARKED |
| | VOID. |
| | |
| | 4. THIS PERMIT WILL NOT BE ISSUED UNTIL THE MASTER IS |
| | ISSUED. |
| | |
| | 5. I WAS UNABLE TO LOCATE ASSEMBLY PROPSED IN THE NEW |
| | SUBMITTAL. SEE COMMENT #3; IF THIS INFORMATION IS IN |
| | THE FIRST SUBMITTAL DOCUMENTS, THE DOCUMENTS NEEDED FOR |
| | REVIEW SHOULD BE PUT WITH THE CURRENT SUBMITTAL. A |
| | LARGE STACK OF PAPERS WAS SUBMITTED. THE SECOND PAPER |
| | CLIPPED PORTION STARTS WITH THE MIDDLE OF A PRODUCT |
| | APPROVAL. EITHER SUBMIT COMPLETE PRODUCT APPROVALS, OR |
| | SUBMIT ALL SHEETS NEEDED FOR REVIEW (COVER SHEET |
| | SHOWING PRODUCT APPROVAL NUMBER, STATUS, CODE VERSION, |
| | ETC.), FIRST PAGES WHICH ARE APPLICABLE TO ALL |
| | ASSEMBLIES (INCLUDES LIMITATIONS AND PRODUCTS), AND THE |
| | SHEET(S) WHICH INCLUDE INFORMATION REGARDING THE |
| | SPECIFIC PROPOSED ASSEMLY. IF YOU ARE UNSURE AS TO WHAT |
| | IS REQUIRED, SUBMIT THE COMPLETE PRODUCT APPROVAL WITH |
| | THE PROPOSED ASSEMBLY MARKED AND UNNEEDED SHEETS WILL |
| | BE REMOVED FOR YOU. |
| | |
