| Date |
Text |
| 2017-01-10 16:15:46 | RESIDENTIAL (R3) BUILDING REVIEW COMMENTS. |
| | CODE: FBC 5TH EDITION (2014). |
| | |
| | NOTE: |
| | THIS SUBMITTAL WAS CHANGED FROM SUBMITTAL OF DOCUMENTS |
| | TO REVISION BECAUSE THERE ARE 5 PRODUCT APPROVALS THAT |
| | WERE CHANGED FROM THE ONES THAT WERE ALREADY APPROVED. |
| | OWES $401.50 FOR REVISION FEES. |
| | |
| | 1- ARMOR SCREEN IMPACT PROTECTIVE SYSTEM PRODUCT |
| | APPROVAL FL812-R7 SUBMITTED: |
| | A) IDENTIFY WHICH TYPICAL INSTALLATION IS GOING TO BE |
| | INSTALLED AND SPECIFY ANCHOR TYPE AND SPACING TO VERIFY |
| | COMPLIANCE WITH THE DESIGN PRESSURES OF SEC. R301.1 |
| | FBC-RESIDENTIAL, 5TH EDITION (2014). NOTE: TAKE INTO |
| | CONSIDERATION CONSTRUCTION MATERIALS USED TO BUILT THE |
| | ENTRANCE AREA. THIS PRODUCT MAY NOT BE SUITABLE FOR THE |
| | PROPOSED INSTALLATION. |
| | |
| | B) DESIGNER OF RECORD TO APPROVE PRODUCT APPROVAL IN |
| | WRITING AS REQUIRED BY SEC. 107.3.4.1 CITY AMENDMENTS. |
| | THE SEPARATE SHOP DRAWINGS REVIEW LETTER DOESN'T |
| | IDENTIFY WHICH PRODUCT APPROVAL WAS REVIEWED. IDENTIFY |
| | THE SPECIFIC PRODUCT APPROVAL THAT WAS REVIEWED OR |
| | PROVIDE REVIEW STAMP ON THE COVER PAGE OF THE PRODUCT |
| | APPROVAL REVIEWED AS IT WAS DONE ON THE OTHER PRODUCT |
| | APPROVALS SUBMITTED. |
| | |
| | IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT |
| | JULIO GOMEZ |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | BUILDING DIVISION |
| | (561)805-6712 |
| | [email protected] |
