| Date |
Text |
| 2016-04-28 13:09:33 | 1ST REVIEW: FBC 2014 5TH ED |
| | CHRISTOPHER S. THROOP, C.B.O. |
| | BLDG. PLANS EXAMINER ? PX3169 |
| | (561) 805-7918 |
| | [email protected] |
| | |
| | 1. PROVIDE SITE PLAN INDICATING SPECIFIC LOCATION OF |
| | ADA RAMP. |
| | 2. ADA RAMP AND ACCESSIBLE ROUTE SHALL COMPLY WITH FBC |
| | ACCESS. CHPT. 4. DETECTABLE WARNING TO COMPLY WITH DOT |
| | REG. 49 CFR 37.21. |
| | 3. PROVIDE SPECIFIC DEMENSIONS ON PLANS. |
| | 4, DESIGNER TO SIGN PLANS. |
| | |
| | FBC 107.2.1 INFORMATION ON CONSTRUCTION DOCUMENTS. |
| | CONSTRUCTION DOCUMENTS SHALL BE DIMENSIONED AND DRAWN |
| | UPON SUITABLE MATERIAL. CONSTRUCTION DOCUMENTS SHALL BE |
| | OF SUFFICIENT CLARITY TO INDICATE THE LOCATION, NATURE |
| | AND EXTENT OF THE WORK PROPOSED AND SHOW IN DETAIL THAT |
| | IT WILL CONFORM TO THE PROVISIONS OF THIS CODE AND |
| | RELEVANT LAWS, ORDINANCES, RULES AND REGULATIONS, AS |
| | DETERMINED BY THE BUILDING OFFICIAL. SUCH DRAWINGS AND |
| | SPECIFICATIONS SHALL CONTAIN INFORMATION, IN THE FORM |
| | OF NOTES OR OTHERWISE, AS TO THE QUALITY OF MATERIALS, |
| | WHERE QUALITY IS ESSENTIAL TO CONFORMITY WITH THE |
| | TECHNICAL CODES. SUCH INFORMATION SHALL BE SPECIFIC, |
| | AND THE TECHNICAL CODES SHALL NOT BE CITED AS A WHOLE |
| | OR IN PART, NOR SHALL THE TERM "LEGAL" OR ITS |
| | EQUIVALENT BE USED AS A SUBSTITUTE FOR SPECIFIC |
| | INFORMATION. ALL INFORMATION, DRAWINGS, SPECIFICATIONS |
| | AND ACCOMPANYING DATA SHALL BEAR THE NAME AND SIGNATURE |
| | OF THE PERSON RESPONSIBLE FOR THE DESIGN. (SEE ALSO |
| | SECTION 107.3.5). |
| | |
| | 402.1 GENERAL. |
| | ACCESSIBLE ROUTES SHALL COMPLY WITH 402. |
| | |
| | 402.2 COMPONENTS. |
| | ACCESSIBLE ROUTES SHALL CONSIST OF ONE OR MORE OF THE |
| | FOLLOWING COMPONENTS: WALKING SURFACES WITH A RUNNING |
| | SLOPE NOT STEEPER THAN 1:20, DOORWAYS, RAMPS, CURB |
| | RAMPS EXCLUDING THE FLARED SIDES, ELEVATORS, AND |
| | PLATFORM LIFTS. ALL COMPONENTS OF AN ACCESSIBLE ROUTE |
| | SHALL COMPLY WITH THE APPLICABLE REQUIREMENTS OF |
| | CHAPTER 4 AND 208.3.1. |
| | |
| | |
| | |
