| Date |
Text |
| 2009-10-05 12:00:52 | AMY STELLY |
| | PLANNING & ZONING |
| | 561.822.1442 |
| | |
| | PLEASE INCLUDE A DETAIL WHICH SHOWS FENCE HEIGHT AND |
| | CONSTRUCTION DETAILS. |
| | PER SEC. 94-302: |
| | |
| | (B) RESIDENTIAL FENCE, HEDGE, AND WALL LIMITATIONS. |
| | (1) MAXIMUM HEIGHT. IN RESIDENTIAL DISTRICTS, NO FENCE |
| | OR WALL SHALL EXCEED SIX FEET IN HEIGHT WITHIN REQUIRED |
| | SIDE AND REAR SETBACKS. FENCES OR WALLS SHALL NOT BE IN |
| | EXCESS OF 48 INCHES IN HEIGHT WITHIN THE REQUIRED FRONT |
| | SETBACK. HEDGES SHALL NOT EXCEED TEN FEET IN HEIGHT IN |
| | ANY REQUIRED SETBACK. |
| | (2) MAXIMUM HEIGHT, EXCEPTION. ON CORNER LOTS AND |
| | THROUGH LOTS ADJACENT TO A COLLECTOR OR ARTERIAL |
| | RIGHT-OF-WAY AS DESIGNATED BY THE CITY ENGINEER, A |
| | FENCE, OR WALL SHALL NOT EXCEED SIX FEET IN HEIGHT AND |
| | A HEDGE TEN FEET IN HEIGHT WITHIN THE REQUIRED FRONT |
| | SETBACK ADJACENT TO THE COLLECTOR OR ARTERIAL |
| | RIGHT-OF-WAY. ON RESIDENTIAL LOTS DIRECTLY ABUTTING |
| | COMMERCIAL OR INDUSTRIAL ZONING DISTRICTS, A FENCE OR |
| | WALL SHALL NOT EXCEED EIGHT FEET IN HEIGHT WITHIN THE |
| | SIDE OR REAR SETBACK, OUTSIDE OF THE FRONT SETBACK, |
| | WHERE THE PROPERTY ABUTS THE COMMERCIAL OR INDUSTRIAL |
| | ZONING DISTRICT. FENCES, WALLS AND HEDGES INSTALLED |
| | PURSUANT TO THIS SECTION SHALL BE SUBJECT TO THE CLEAR |
| | VISION REQUIREMENTS OF SUBSECTION 33-112(E) OF THIS |
| | CODE. |
| | (3) SPECIAL FENCE PROHIBITIONS. NO BARBED WIRE, |
| | ELECTRICAL ELEMENTS, OR OTHER HAZARDOUS MATERIALS SHALL |
| | BE MAINTAINED AS A FENCE OR WALL IN A RESIDENTIAL |
| | DISTRICT. THE TOP OF ANY CHAINLINK OR CYCLONE FENCE |
| | SHALL BE CRIMPED TO ELIMINATE THE EXPOSURE OF SHARP |
| | EDGES. |
| | |
