| Date |
Text |
| 2007-05-21 11:16:48 | DENIED |
| | REFERENCE: |
| | ** FBC-2004 PLUMBING. |
| | ** FBC-2004 CHAPTER 1, THE CITY OF |
| | WEST PALM BEACH AMENDMENTS. |
| | |
| | 1. SHEET A.0: MORE INFORMATION IS REQUIRED. PLEASE |
| | INDICATE ON THE DRAWING THE EXISTING PLUMBING LAYOUT |
| | AND CLEARLY IDENITIFY THE FIXTURES (WATER |
| | CLOSET,LAV,SHOWER,WASHING MACHINE,KITCHEN SINK, ECT...) |
| | AND ON SHEET A.1 ON THE SEPERATE DRAWING PLEASE |
| | INDICATE THE NEW PROPOSED |
| | PLUMBING LAYOUT. PLEASE CLEARLY IDENTIFY ALL FIXTURES. |
| | |
| | A} IF PLUMBING LAYOUT IS THE SAME |
| | WITH NO CHANGES, PLEASE INDICATE THIS ON |
| | THE DRAWING. |
| | B} IF PLUMBING LAYOUT IS THE |
| | SAME AND THE PLUMBING FIXTURES ARE TO BE |
| | CHANGED, PLEASE INDCATE ON THE DRAWING. |
| | "EXACT FIXTURE CHANGE OUT ONLY." |
| | C} IF THE NEW PROPOSED PLUMBING LAYOUT IS DIFFERENT |
| | FROM THE EXISTING PLEASE FOLLOW WHAT IS REQUIRED IN |
| | COMMENT #2 |
| | |
| | 2. PER FBC-2004 CHAPTER 1, SECTION 106.3.5.4 |
| | RESIDENTIAL (ONE AND TWO-FAMILY) PLEASE SUBMIT A |
| | PLUMBING SANITARY ISOMETRIC RISER DIAGRAM INDICATING |
| | ALL WASTE, VENTS, TRAPS AND SIZES WITH CLEANOUT |
| | LOCATIONS. |
| | NOTE: THE FOLLOWING IS REQUIRED FOR THE WASHING |
| | MACHINE. |
| | (A) 406.3 WASTE CONNECTIONS.THE TRAP AND |
| | FIXTURE DRAIN FOR AN AUTOMATIC CLOTHES |
| | WASHER SHALL BE A MINIMUM OF 2 INCHES |
| | (51MM) IN DIAMETER. THE AUTOMATIC |
| | CLOTHES WASHER FIXTURE DRAIN SHALL |
| | CONNECT TO A BRANCH DRAIN OR DRAINAGE |
| | STACK A MINIMUM OF 3 INCHES (76MM) IN |
| | DIAMETER. |
| | (B) 802.4 STANDPIPES.STANDPIPES SHALL BE INDIVIDUALLY |
| | TRAPPED. STANDPIPES SHALL |
| | EXTEND A MINIMUM OF 18 INCHES (457MM) |
| | AND A MAXIMUM OF 42 INCHES (1066MM) |
| | ABOVE THE TRAP WEIR. ACCESS SHALL BE |
| | PROVIDED TO ALL STANDPIPES AND DRAINS |
| | FOR RODDING. PLEASE INDICATE STADPIPE FOR THE WASHING |
| | MACHINE ON THE RESUBMITTAL. |
| | (C) 708.7 MINIMUM SIZE. CLEANOUTS SHALL |
| | BE THE SAME NOMINAL SIZE AS THE PIPE |
| | THEY SERVE UP TO 4 INCHES (102MM) |
| | NOTE: CLEANOUT FOR THE WASHING MACHINE SHALL BE THREE |
| | INCH (3") |
| | (D) 708.9 ACCESS. ACCESS SHALL BE |
| | PROVIDED TO ALL CLEANOUTS. |
| | NOTE: CLEANOUT FOR THE WASHING MACHINE TO BE LOCATED AT |
| | FOUR FEET ABOVE FINNISH FLOOR (4' A.F.F.) |
| | |
| | 3. FBC-2004 CHAPTER 1,SECTION 106.3.4.2: |
| | THE PERSON RESPONSIBLE FOR THE DESIGN OF |
| | THE DRAWING SHALL CLEARLY PRINT AND SIGN |
| | NAME, AND ALSO DATE DRAWING. PLEASE DO |
| | THIS PRIOR TO RESUBMITTING. |
| | |
| | END OF COMMENTS: |
| | |
| | REVIEW BY MIKE PERSON |
| | (561) 805-6730 |
| | FAX (561) 805-6731 |
| | E-MAIL [email protected] |
| | UNDER SUPERVISION OF K.STEVENS |
| | (561) 805-6721 |
