| Date |
Text |
| 2006-08-05 00:00:00 | ****CORRECTIONS**** |
| | |
| | SAMANTHA HILL, BUILDING PLANS EXAMINER |
| | 561-805-6724 [email protected] |
| | |
| | FBC FLORIDA BUILDING CODE 2004 |
| | FBC* CITY OF WEST PALM BEACH AMENDMENTS |
| | TO THE FBC2004 |
| | |
| | COMMENTS FROM FIRST REVIEW |
| | |
| | |
| | _XX_2.PROVIDE BUILDING HEIGHT ON THE |
| | PLAN.DESIGN PRESSURES FOR BUILDINGS |
| | OVER 60FEET ARE REQUIRED TO BE DESIGNED |
| | USING ASCE7, FBC1609.1.1 AND MUST BE |
| | DONE BY AN ENGINEER. DOCUMENTS PREPARED |
| | BY AN ENGINEER AND SUBMITTED FOR PUBLIC |
| | RECORD ARE TO BE SIGNED SEALED ORIGINALS |
| | FAC61G15-23.002. |
| | |
| | PLEASE PROVIDE BUILDING HEIGHT.THE |
| | PLAN STATES <60'.NO EXPOSURE CATEGORY |
| | WAS GIVEN.IF THE BUILDING IS 59', |
| | EXPOSURE C, THE DESIGN PRESSURE FOR THE |
| | 24X50 OPENING IS -76.46.IF THE |
| | BUILDING IS 29', EXPOSURE B, THE SAME |
| | OPENING HAS A DP OF -47.2.THE |
| | PRESSURES ARE DETERMINED BY BUILDING |
| | HEIGHT, NOT OPENING LOCATION (INDICATED |
| | AS FIRST FLOOR).SEE FBC TABLE 1609.6B. |
| | I CAN DETERMINE DESIGN PRESSURES FOR YOU |
| | BUT YOU MUST PROVIDE THE REQUESTED |
| | INFORMATION. |
| | |
| | _XX_6.ON THE PRODUCT APPROVAL, MARK |
| | WHICH DETAILS APPLY TO THIS JOB.PLEASE |
| | USE INK RATHER THAN A HIGHLIGHTER. |
| | |
| | IT IS NOT CLEAR IF THE ANCHORING |
| | SPECIFIED IS CODE COMPLIANT.PLEASE |
| | CIRCLE APPROPRIATE NUMBER ON THE |
| | ANCHORING CHART.SOME CONNECTION TYPES |
| | REQUIRE DIFFERENT SPACING. |
| | |
| | 2ND REVIEW - SPANS DO NOT APPEAR TO BE |
| | CORRECT.OPENING 1 STATES THAT THE SPAN |
| | IS 155" WITH A VERTICAL INSTALLATION, |
| | BUT THE HEIGHT IS ONLY 96".YOU HAVE |
| | SPECIFIED 12" FOR THE BOTTOM ANCHORING, |
| | BUT CIRCLED 5" AND 6" ON THE PRODUCT |
| | APPROVAL WITH THE NOTE THAT THIS IS THE |
| | FLOOR TRACK..THERE ARE OTHER |
| | INCONSISTENCIES.ALL NOTES CIRCLED |
| | ARE FOR -47.2, NOTE THAT THIS WILL BE |
| | NONCOMPLIANT UNLESS THE BUILDING IS LESS |
| | THAN 30' IN EXPOSURE B. |
| | |
| | CODE COMPLIANCE CANNOT BE DETERMINED DUE |
| | TO CONFLICTING INFORMATION AND LACK OF |
| | INFORMATION TO DETERMINE DESIGN |
| | PRESSURES. |
| | |
| | PLEASE CONTACT ME IF YOU NEED |
| | ASSISTANCE. |
