| Date |
Text |
| 2003-11-20 00:00:00 | UNSAT |
| | |
| | 1) DETAIL 8 ON A8 IS FOR A PRIVACY WALL |
| | WITH A MAXIMUM HEIGHT OF 6 FEET. THE |
| | WALL AT THE COVERED REAR PORCH HAS THIS |
| | DETAIL SPECIFIED. THIS WALL IS INDICATED |
| | ON THE RIGHT ELEVATION AND THE ROOF |
| | FRAMING PLAN AS BEING 10' IN HEIGHT AND |
| | SUPPORTING THE PORCH ROOF. PLEASE |
| | CLARIFY. REVIEW LOCATION OF GIRDER TRUSS |
| | ON THIS WALL, VERTICAL REINFORCEMENT OF |
| | WALL MAY BE NECESSARY AT THIS LOCATION. |
| | |
| | 2) THE UPLIFT VALUES LISTED IN THE |
| | CONCRETE TO TRUSS CONNECTOR SCHEDULE ON |
| | SHEET A5A ARE NOT CORRECT FOR MULTIPLE |
| | STRAPS. THE VALUES DO NOT DOUBLE FOR 2 |
| | STRAPS OR TRIPLE FOR THREE, ETC. THIS IS |
| | DUE TO THE PROXIMITY OF THE STRAPS AND |
| | CONE PULL OUT OF THE CONCRETE. SEE THE |
| | SIMPSON CATALOG OR CONTACT SIMPSON. |
| | EXAMPLE: (2) HETA 20 CONNECTORS IN A |
| | CONCRETE BEAM HAVE AN UPLIFT VALUE OF |
| | 2710# NOT 3030#. PLEASE REVISE. |
| | |
| | 3) PROVIDE A DETAIL INDICATING HOW THE |
| | INTERIOR BEARING WALLS ARE ATTACHED TO |
| | THE EXTERIOR MASONRY WALLS. |
| | |
| | 4) SPECIFY THE TRUSS BOTTOM CORD LIVE |
| | LOAD IN THE DESIGN PARAMETERS. SEE FBC |
| | TABLE 1604.1. |
| | |
| | 5)PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL FORM PER |
| | RULE 9B-72. SEE ATTACHMENT. |
| | |
| | 6) SUBMIT THE APPROVED DRAWINGS FOR THE |
| | GARAGE DOOR. |
| | |
| | 7) SUBMIT UPDATED DRAWINGS FOR THE OUT- |
| | SWING STEEL DOOR WITH SIDELITES WHICH |
| | HAVE THE RENEWAL NOA NUMBER STAMPED ON |
| | THEM. |
| | |
| | 8) PROVIDE (2) PRODUCT APPROVALS, KEY |
| | PLANS AND INSTALLATION SCHEDULES |
| | INDICATING THE SPECIFIC TYPES OF ANCHORS |
| | TO BE USED FOR STORM PANELS OR APPLY |
| | UNDER A SEPARATE PERMIT. |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
