| Date |
Text |
| 2003-11-03 00:00:00 | BUILDING CHECKLIST: |
| | 1-NEED RECORDED NOTICE OF COMMENCEMENT. |
| | 2-PROVIDE DETAIL CONNECTION AT TRANSOM |
| | WINDOW ON TOP OF GLASS BLOCK AT MASTER |
| | BATH. SEC. 104.2.1.2 CITY AMENDMENTS |
| | TO FBC 2001. ***NOTE: SEE PRODUCT |
| | APPROVAL FOR APPROVED INSTALLATIONS. |
| | 3-PROVIDE CONSTRUCTION DETAIL FOR ARCHED |
| | OPENINGS AT WINDOWS AND ENTRY PORCH. |
| | SEC. 104.2.1.2 CITY AMENDMENTS TO FBC. |
| | 4-REVISE DESIGN PRESSURES SPECIFIED FOR |
| | DOORS AND WINDOWS OPENINGS. SEE TABLES |
| | 1606.2B AND 1606.2E FBC 2001. OR PRO- |
| | VIDE ENGINEERING CALCULATIONS FOR |
| | DESIGN PRESSURES SHOWN. |
| | SEC. 104.2.1.2 CITY AMENDMENTS TO FBC. |
| | 5-PROVIDE AIR HANDLING UNIT HANGING |
| | DETAILS. SPECIFY ALL FASTENERS. SEC. |
| | 104.2.1.2 CITY AMENDMENTS TO FBC 2001. |
| | 6-DESIGN PARAMETERS ON SHEET A3: |
| | A)INCLUDE THE ATTIC LIVE LOAD (10PSF OR |
| | 30PSF)AS REQ'D BY TABLE 1604.1 FBC. |
| | B)WHERE IS THE DESIGN WIND VELOCITY |
| | PRESSURE TAKEN FROM. SEE SEC. 6.5.12 |
| | OF ASCE 7-98 FOR VELOCITY PRESSURE. |
| | C)REVISE THE MEAN ROOF HEIGHT. IT IS |
| | TAKEN FROM FINISH GRADE TO THE AVERAGE |
| | POINT OF THE HIGHEST ROOF. |
| | D)SEE COMMENTS ON SHEET A3. |
| | |
| | 7-PROVIDE COMPLETE DETAIL FOR INSTALLA- |
| | TION OF DOUBLE FRENCH DOORS MULLED |
| | TOGETHER. SEE DOOR PRODUCT APPROVAL |
| | FOR APPROVED INSTALLATIONS. SPECIFY |
| | ALL MATERIALS AND FASTENERS. SECTION |
| | 104.2.1.2 CITY AMENDMENTS TO FBC 2001. |
| | 8-PROVIDE BBQ UL LISTING AND SPECS. |
| | SECTION 2808 FBC 2001. |
| | 9-SPECIFY ON PLANS IF GLASS BLOCK IS |
| | SAFETY GLASS OR FACE THICKNESS IS NOT |
| | LESS THAN 0.25". SEC. 2405.2.2 FBC. |
| | 10-PROVIDE STRUCTURAL BUCK DETAIL FOR |
| | OVAL AND ARCHED WINDOWS. ALSO, REVISE |
| | DOOR AND WINDOW BUCK DETAIL ON SHEET |
| | A2 TO COMPLY WITH SEC. 1707.4.4.2 FOR |
| | CORRECT BUCK INSTALLATION. |
| | 11-DETAIL D/6: SPECIFY ANCHOR EMBEDMENT. |
| | SEC. 104.2.1.2 CITY AMENDMENTS TO FBC |
| | AND 1606.1.3 FBC 2001. |
| | 12-PROVIDE STRUCTURAL BUCK DETAIL FOR |
| | ENTRY DOORS. SEE PLANS FOR GAP SHOWN. |
| | SPECIFY SIZE OF BUCKS AND FASTENERS. |
| | ALSO, SEE SEC. 1707.4.4.2 FOR PROPER |
| | BUCK INSTALLATION. |
| | 13-STORM SHUTTERS: A)PROVIDE STATE WIDE |
| | PRODUCT APPROVAL OR INFORMATION FOR |
| | LOCAL PRODUCT APPROVAL. SEE ATTACHED |
| | COPY FOR QUESTIONS & ANSWERS REGARDING |
| | PRODUCT APPROVAL SUBMITTAL AFTER OCT. |
| | 2001. |
| | B)PROVIDE KEY PLAN AND COMPLETE INSTALLA |
| | TION SCHEDULE. |
| | C)CLEARLY MARK ON DRAWINGS SPECIFIC |
| | MOUNTING CONDITIONS AND ANCHOR TYPE & |
| | SPACING TO BE USED ACCORDING TO THE |
| | DESIGN PRESSURES, EDGE DISTANCE, PANEL |
| | SPAN, CONNECTION TYPE AND STRUCTURE TO |
| | BE ATTACHED TO. |
| | |
| | 14-SPECIFY WHICH OPENING IS GOING TO BE |
| | USED FOR MEANS OF EGRESS THAT COMPLIES |
| | WITH SEC. 1005.4.5 FBC 2001. |
| | 15-REVISE TRUSS ANCHOR SCHEDULE TO |
| | COMPLY WITH SEC. 1609.4.3 FBC 2001 |
| | WHICH DOESN'T ALLOW THE STEEL STRESS |
| | TO BE INCREASED. PROVIDE ENGINEERING |
| | CALCS FOR VALUES OTHER THAN THOSE |
| | SHOWN ON PUBLISHED ANCHOR CATALOGUE. |
| | 16-PROVIDE ROOF SHEATHING DIAPHRAGM |
| | SHOWING NAILING ZONES, FASTENER TYPE |
| | AND SPACING. SEC. 2306 CITY AMENDMENTS |
| | 17-PROVIDE DETAIL/SPECS FOR CEILING |
| | INSTALLATION AT ENTRY AND REAR PORCH. |
| | SEE ASTM C926 AND ASTM C1063.SECTION |
| | 2504.2 FBC 2001. |
| | 18-ENERGY CALCULATIONS: A)COMPLETE ALL |
| | INFORMATION ON TOP OF FORM. |
| | B)REVISE UNDER ATTIC AREA. SEE SECTION |
| | 604.1.A.1. CHAPTER 13 FBC 2001. |
| | C)OWNER/AGENT TO SIGN AND DATE FORM TOO. |
| | |
| | 19-NEED STATE WIDE OR LOCAL PRODUCT |
| | APPROVAL FOR ALL DOORS, WINDOWS, |
| | MULLIONS, GLASS BLOCK, ROOF FINISHES. |
| | SEE ATTACHED QUESTIONS & ANSWERS COPY |
| | NOTE: |
| | ***ADDITIONALLY MARK ON SUBMITTED DWGS |
| | THE SPECIFIC COMPONENTS TO BE USED. EG: |
| | IMPACT GLAZING OR NOT, SPECIFIC MULLION |
| | SIZE AND ANCHOR SPACING, ETC. |
| | 20-SEE COMMENTS ON SHEET A6 AND PLEASE |
| | RETURN REVIEWED SET OF DRAWINGS AFTER |
| | CORECTIONS ARE DONE TO ORIGINAL CAD |
| | DRAWINGS TO EXPEDITE REVIEW PROCESS. |
| | 21-VALUATION AND SQUARE FOOTAGE WAS |
| | UPDATED. TOTAL PERMIT FEE IS $3532.98. |
| | PLEASE BRING PAID RECEIPT TO ADJUST |
| | PAYMENTS AND PAY THE BALANCE. |
| | |
| | IF YOU HAVE ANY QUESTIONS, PLEASE CALL |
| | JULIO GOMEZ AT 805-6712. |
