| Date |
Text |
| 2002-04-04 00:00:00 | *************BUILDING UNSAT************* |
| | |
| | 1) A RECORDED COPY OF THE NOTICE OF |
| | COMMENCEMENT MUST BE SUBMITTED BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 2) IMPACT FEES MUST BE PAID TO PALM |
| | BEACH COUNTY, PLANS STAMPED BY THEM AND |
| | COPY OF RECEIPT SUBMITTED TO CITY OF |
| | WEST PALM BEACH BUILDING DEPARTMENT, |
| | BEFORE A BUILDING PERMIT CAN BE ISSUED. |
| | |
| | 3)THE OWNER/AGENTS SIGNATURE IS REQUIRED |
| | ON THE FL ENERGY EFFICIENCY CODE FORM. |
| | PROVIDE TWO (2) COPIES. |
| | |
| | 4) PROVIDE (2) COPIES OF SURVEY. |
| | |
| | 5) INDICATE ON PLANS THAT EXISTING |
| | BEDROOM ADJACENT TO ADDITION HAS AN |
| | EXISTING WINDOW THAT COMPLIES WITH 97SBC |
| | SECTION 1005.4 FOR EMERGENCY EGRESS OR A |
| | NEW ONE THAT COMPLIES WILL BE INSTALLED. |
| | INDICATE WINDOW SIZE AND TYPE FOR THIS |
| | WINDOW ON PLAN. |
| | |
| | 6) THE GLASS BLOCK IN THE BATHROOM MUST |
| | COMPLY WITH 97SBC SECTIONS 2405.2.1 AND |
| | 2405.2.2(5) FOR GLAZING IN HAZARDOUS |
| | LOCATIONS. GLASS BLOCKS MUST HAVE A |
| | UNIFORM FACE THICKNESS OF 0.25". |
| | |
| | 7) ADD CARPORT TO GARAGE CONVERSION TO |
| | THE DESCRIPTION OF WORK ON THE PERMIT |
| | APPLICATION. |
| | |
| | 8) INDICATE ON PLANS THE SIZE OF THE |
| | ATTIC ACCESS. MINIMUM OPENING IS 22"X36" |
| | PER SEC. 2309.6. |
| | |
| | 9) SECTION FFC ON SHEET 2 OF PLANS DOES |
| | NOT INDICATE THE SIZE OF THE DOWELS. THE |
| | SECTION INDICATED ON THE FLOOR PLAN IS |
| | LABELED FCC AND THE ACTUAL SECTION IS |
| | LABELED FFC. PLEASE CORRECT. |
| | |
| | 10) THE ROOF FRAMING PLAN ON SHEET 2 |
| | DOES NOT SPECIFY WHICH DETAIL TO REFER |
| | TO WHERE NEW TRUSSES BEAR ON EXISTING |
| | BEAM. PLEASE SPECIFY THE ANCHORS AND |
| | FASTENERS. |
| | |
| | 11) INCORRECT INFORMATION IS GIVEN FOR |
| | EMERGENCY EGRESS WINDOWS ON SHEET 1. |
| | PLEASE CORRECT. SEE NOTES ON PLAN. |
| | |
| | 12) ADEQUATE FOUNDATION IS REQUIRED AT |
| | CARPORT TO SUPPORT NEW BLOCK WALLS. |
| | INDICATE ON PLANS THE THICKNESS OF THE |
| | EXISTING SLAB AND/OR HOW IT WILL BE |
| | MADE ADEQUATE. |
| | |
| | 13)INDICATE THE ROOF PITCH ON THE PLANS. |
| | |
| | 14) INDICATE THE ELEVATION DIMENSIONS, |
| | INCLUDING BEAM HEIGHTS, CEILING HEIGHT, |
| | ETC. ON THE PLANS. |
| | |
| | 15)PROVIDE (2) PRODUCT APPROVALS, KEY |
| | PLANS AND INSTALLATION SCHEDULES |
| | INDICATING THE SPECIFIC TYPES OF ANCHORS |
| | TO BE USED FOR STORM PANELS. OR APPLY |
| | UNDER A SEPARATE PERMIT AT A LATER DATE. |
| | |
| | 16) PROVIDE (2) CURRENT AND COMPLETE |
| | COPIES OF SBCCI OR METRO-DADE PRODUCT |
| | APPROVALS FOR: |
| | - GLASS BLOCK |
| | - ALL EXTERIOR DOORS (EACH TYPE) |
| | - ALL WINDOWS (EACH TYPE) |
| | - GARAGE DOOR |
| | - ROOF COVERING |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)659-8096 EXT.8202 |
