Plan Review Details - Permit 22061296
Plan Review Stops For Permit 22061296
Review Stop B BUILDING (STRUCTURAL)
Rev No 1 Status P Date 2022-08-05 Cont ID  
Sent By rmcdouga Date 2022-08-05 Time 07:22 Rev Time 0.00
Received By rmcdouga Date 2022-08-05 Time 07:22 Sent To  
Notes
2022-08-05 07:25:28THE 2 HOUR FIRE RESITANT SHAFT IS TO BE RECONSTRUCTED
 USING THE LISTED SHAFT ASSEMBLY SPECIFIED. SEE
 MECHANICAL COMMENTS.
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2022-08-05 Cont ID  
Sent By rmcdouga Date 2022-08-05 Time 07:23 Rev Time 0.00
Received By rmcdouga Date 2022-07-15 Time 12:14 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date 2022-06-28 Cont ID  
Sent By medwards Date 2022-06-28 Time 14:58 Rev Time 0.00
Received By medwards Date 2022-06-27 Time 08:07 Sent To  
Notes
***NONE***
Review Stop M MECHANICAL (A/C)
Rev No 2 Status N Date 2022-07-18 Cont ID  
Sent By medwards Date 2022-07-18 Time 06:55 Rev Time 0.00
Received By medwards Date 2022-07-18 Time 06:55 Sent To  
Notes
2022-07-18 06:58:29THIS IS A SHAFT FOR THE EXHAUST FANS IN THIS HIGH RISE.
 THIS IS A BUILDING ISSUE. NO MECHANICAL FOR THIS
 PROJECT. THERE SHOULD BE A BUILDING PERMIT FOR THIS
 SHAFT. ME
Review Stop M MECHANICAL (A/C)
Rev No 1 Status F Date 2022-06-28 Cont ID  
Sent By medwards Date 2022-06-28 Time 14:48 Rev Time 0.00
Received By medwards Date 2022-06-28 Time 14:48 Sent To  
Notes
2022-06-28 14:56:53THIS MUST COME IN AS A REVISION TO THE MASTER
 PERMIT-20081382 AND NOT A STAND ALONE MECHANICAL
 PERMIT.
 THE DESIGNER MUST PROVIDE DEMO DRAWINGS OF THE SHAFT
 AND THE DESIGN DRAWING SHOWING A CODE COMPLIANT SHAFT.
 THE MECHANICAL DESIGNER MUST PROVIDE A DEMO DRAWING OF
 THE ORIGINAL DESIGN OF THE DUCTWORK THAT IS INSIDE OF
 THE SHAFT. THIS SHOULD ALSO NAME THE DUCTWORK AND
 DETAIL THE USE OF THE DUCTWORK IN THE SHAFT.
 THE DESIGNER MUST ALSO SHOW A DRAWING WITH ALL OF THE
 DUCTWORK PUT BACK AS IT WAS ORIGINALLY AND IDENTIFYING
 EACH DUCT INSIDE THE SHAFT.
 THE UL SHAFT DETAIL SHOULD NOT BE ON THE MECHANICAL
 DRAWING AS THIS SHOULD BE ON THE BUILDING DRAWING AS
 THE GENERAL CONTRACTOR IS RESPONSIBLE FOR THE SHAFT.
  
 MICHAEL EDWARDS
 MECHANICAL EXAMINER
 401 CLEMATIS STREET
 WEST PALM BEACH FL. 33401
 561-805-6728
 [email protected]
  
Review Stop SIGNATURE ELECTRONIC SIGNATURE SHEET
Rev No 2 Status P Date 2022-07-18 Cont ID  
Sent By medwards Date 2022-07-18 Time 07:00 Rev Time 0.00
Received By medwards Date 2022-07-18 Time 07:00 Sent To  
Notes
***NONE***
Review Stop SIGNATURE ELECTRONIC SIGNATURE SHEET
Rev No 1 Status F Date 2022-06-28 Cont ID  
Sent By medwards Date 2022-06-28 Time 14:58 Rev Time 0.00
Received By medwards Date 2022-06-28 Time 14:58 Sent To  
Notes
2022-06-28 14:58:38THIS MUST COME IN AS A REVISION TO THE MASTER
 PERMIT-20081382 AND NOT A STAND ALONE MECHANICAL
 PERMIT.
 THE DESIGNER MUST PROVIDE DEMO DRAWINGS OF THE SHAFT
 AND THE DESIGN DRAWING SHOWING A CODE COMPLIANT SHAFT.
 THE MECHANICAL DESIGNER MUST PROVIDE A DEMO DRAWING OF
 THE ORIGINAL DESIGN OF THE DUCTWORK THAT IS INSIDE OF
 THE SHAFT. THIS SHOULD ALSO NAME THE DUCTWORK AND
 DETAIL THE USE OF THE DUCTWORK IN THE SHAFT.
 THE DESIGNER MUST ALSO SHOW A DRAWING WITH ALL OF THE
 DUCTWORK PUT BACK AS IT WAS ORIGINALLY AND IDENTIFYING
 EACH DUCT INSIDE THE SHAFT.
 THE UL SHAFT DETAIL SHOULD NOT BE ON THE MECHANICAL
 DRAWING AS THIS SHOULD BE ON THE BUILDING DRAWING AS
 THE GENERAL CONTRACTOR IS RESPONSIBLE FOR THE SHAFT.
  
 MICHAEL EDWARDS
 MECHANICAL EXAMINER
 401 CLEMATIS STREET
 WEST PALM BEACH FL. 33401
 561-805-6728
 [email protected]
  


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved