Plan Review Details - Permit 21041412
Plan Review Stops For Permit 21041412
Review Stop B BUILDING (STRUCTURAL)
Rev No 4 Status P Date 2022-11-01 Cont ID  
Sent By jbrooks Date 2022-11-01 Time 09:32 Rev Time 0.00
Received By jbrooks Date 2022-11-01 Time 07:39 Sent To  
Notes
***NONE***
Review Stop B BUILDING (STRUCTURAL)
Rev No 3 Status F Date 2022-10-19 Cont ID  
Sent By jbrooks Date 2022-10-19 Time 12:06 Rev Time 0.00
Received By jbrooks Date 2022-10-19 Time 08:00 Sent To  
Notes
2022-10-19 12:07:17JONATHAN BROOKS JR.
 BUILDING PLANS EXAMINER
 WORK HOURS: MONDAY - FRIDAY 7:00 AM TO 3:00 PM
 PHONE (561) 805-6656
 EMAIL: [email protected]
  
 1ST REVIEW: FBC 2020 7TH EDITION
 FBC = FLORIDA BUILDING CODE, 7TH EDITION (2020)
 FBC B = FBC BUILDING
 FBC R = FBC RESIDENTIAL
 FBC EB = FBC EXISTING BUILDING
 FBC A = FBC ACCESSIBILITY
 FBC EC = FBC ENERGY CONSERVATION
 WPB A = CITY OF WEST PALM BEACH AMENMENTS TO THE FBC
 RESULTS: DENIED
 ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT
 TO RESUBMIT, YOU CAN EITHER DROP OFF YOUR SUBMITTAL AT
 CITY HALL, OR UPLOAD CORRECTIONS TO PROJECTDOX.
  
 1. FBC R 301 FAC9N-3 SUBMITTED FLORIDA DBPR PRODUCT
 APPROVAL FL25621.05.1-R2 COVERS MULTIPLE INSTALLATION
 OPTIONS TO MEET DESIGN UPLIFT PRESSURES. PLEASE SELECT
 CORRECT INSTALLATION OPTIONS FROM PAGE #2 OF THE
 EVALUATION REPORT & PAGE #3 SELECT LOAD TABLE FOR
 STRUCTURES LOCATED IN EXPOSURE B, C, OR D AREA; HAVE
 EITHER A FLAT ROOF, OR GABLE/HIP ROOF WITH MAX SLOPE OF
 12:12; HAVE A MEAN ROOF HEIGHT 30 FEET OR LESS; CIRCLE
 CORRECT WIND SPEED & INSTALLATION METHODS FOR ZONES 1,
 2 & 3. ALL APPLICABLE DETAILS AND ATTACHMENTS MUST BE
 CLEARLY IDENTIFIED ON THE PRODUCT APPROVAL DRAWINGS.
 DETAILS AND ATTACHMENTS NOT SPECIFICALLY COVERED IN
 PRODUCT APPROVALS WILL NEED SITE-SPECIFIC ENGINEERING.
  
 PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED
 MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS.
  
Review Stop B BUILDING (STRUCTURAL)
Rev No 2 Status F Date 2022-09-15 Cont ID  
Sent By medwards Date 2022-09-15 Time 07:11 Rev Time 0.00
Received By medwards Date 2022-09-15 Time 07:10 Sent To  
Notes
2022-09-15 07:11:49JONATHAN BROOKS JR.
 BUILDING PLANS EXAMINER
 WORK HOURS: MONDAY - FRIDAY 7:00 AM TO 3:00 PM
 PHONE (561) 805-6656
 EMAIL: [email protected]
  
 2ND REVIEW: FBC 2020 7TH EDITION
 FBC = FLORIDA BUILDING CODE, 7TH EDITION (2020)
 FBC B = FBC BUILDING
 FBC R = FBC RESIDENTIAL
 FBC EB = FBC EXISTING BUILDING
 FBC A = FBC ACCESSIBILITY
 FBC EC = FBC ENERGY CONSERVATION
 WPB A = CITY OF WEST PALM BEACH AMENMENTS TO THE FBC
 RESULTS: DENIED
  
 PERMIT #21041412BUILDING REVIEW FAILED. 3519 PINEWOOD
 AVE. A
  
 1. FBC R 301 FAC9N-3 SUBMITTED FLORIDA DBPR PRODUCT
 APPROVAL FL38754.06-R0 IS NOT RATED FOR USE IN ZONE 2
 OR ZONE 3 FOR STRUCTURES LOCATED IN EXPOSURE B, C, OR D
 HAVE EITHER FLAT ROOF OR GABLE/HIP ROOF WITH MAX SLOPE
 OF 12:12 WITH A MEAN ROOF HEIGHT 30 FEET OR LESS WIND
 SPEED 170 MPH. PROVIDE SIGNED AND SEALED ENGINEERING
 FOR USE OR SELECT A SYSTEM THAT MEETS THE ABOVE
 CRITERIA. PROJECT LOCATED IN EXPOSURE C CATEGORY AREA.
 2. FBC R 301 FAC9N-3 SUBMITTED FLORIDA DBPR PRODUCT
 APPROVAL FL14317-R13 COVERS MULTIPLE PRODUCT TYPES;
 ROOF COVER OPTIONS; ALLOWABLE
 UNDERLAYMENT/TILE-ADHESIVE COMBINATIONS, ALLOWABLE
 SUBSTRATES & INSTALLATION METHODS. SELECT ALL
 APPLICABLE OPTIONS. ALL APPLICABLE DETAILS AND
 ATTACHMENTS MUST BE CLEARLY IDENTIFIED ON THE PRODUCT
 APPROVAL DRAWINGS. DETAILS AND ATTACHMENTS NOT
 SPECIFICALLY COVERED IN PRODUCT APPROVALS WILL NEED
 SITE-SPECIFIC ENGINEERING.
  
 PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED
 MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS.
  
  
  
 ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT
 TO RESUBMIT, YOU CAN EITHER DROP OFF YOUR SUBMITTAL AT
 CITY HALL, OR UPLOAD CORRECTIONS TO PROJECTDOX
  
 JONATHAN N. BROOKS JR.
 BUILDING PLAN REVIEWER
 CITY OF WEST PALM BEACH
 DEVELOPMENTIAL SERVICES
  
Review Stop B BUILDING (STRUCTURAL)
Rev No 1 Status F Date 2022-08-26 Cont ID  
Sent By jbrooks Date 2022-08-26 Time 09:30 Rev Time 0.00
Received By jbrooks Date 2022-08-26 Time 07:48 Sent To  
Notes
2022-08-26 09:30:28JONATHAN BROOKS JR.
 BUILDING PLANS EXAMINER
 WORK HOURS: MONDAY - FRIDAY 7:00 AM TO 3:00 PM
 PHONE (561) 805-6656
 EMAIL: [email protected]
  
 1ST REVIEW: FBC 2020 7TH EDITION
 FBC = FLORIDA BUILDING CODE, 7TH EDITION (2020)
 FBC B = FBC BUILDING
 FBC R = FBC RESIDENTIAL
 FBC EB = FBC EXISTING BUILDING
 FBC A = FBC ACCESSIBILITY
 FBC EC = FBC ENERGY CONSERVATION
 WPB A = CITY OF WEST PALM BEACH AMENMENTS TO THE FBC
 RESULTS: DENIED
 ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT
 TO RESUBMIT, YOU CAN EITHER DROP OFF YOUR SUBMITTAL AT
 CITY HALL, OR UPLOAD CORRECTIONS TO PROJECTDOX.
  
 1. FBC R 301 FAC9N-3 SUBMITTED FLORIDA DBPR PRODUCT
 APPROVAL FL38754.3 MAXIMUM DESIGN PRESSURE -97.25 PSF.
 DO NOT MEET THE MINIMUM ZONE 3 DESIGN PRESSURE
 REQUIREMENT OF -121 FOR EXPOSURE CATEGORY C AREAS WITH
 A GABLE ROOF; ROOF SLOPES 2/12-4/12 MEAN ROOF HEIGHT UP
 TO 15 FT. SELECT SYSTEM THAT MEETS OR EXCEEDS THIS
 REQUIREMENT. ALL APPLICABLE DETAILS AND ATTACHMENTS
 MUST BE CLEARLY IDENTIFIED ON THE PRODUCT APPROVAL
 DRAWINGS. DETAILS AND ATTACHMENTS NOT SPECIFICALLY
 COVERED IN PRODUCT APPROVALS WILL NEED SITE-SPECIFIC
 ENGINEERING.
 2. FBC B 107.2.1 SUBMITTED PRODUCT APPROVAL FL14317-R12
 HAS BEEN REVISED TO FL14317-R13. PLEASE PROVIDE A
 COMPLETE SET; IT COVERS MULTIPLE PRODUCT TYPES; ROOF
 COVER OPTIONS; ALLOWABLE UNDERLAYMENT/TILE-ADHESIVE
 COMBINATIONS & ALLOWABLE SUBSTRATES. SELECT ALL
 APPLICABLE OPTIONS FROM EACH CATEGORY. ALL APPLICABLE
 DETAILS AND ATTACHMENTS MUST BE CLEARLY IDENTIFIED ON
 THE PRODUCT APPROVAL DRAWINGS. DETAILS AND ATTACHMENTS
 NOT SPECIFICALLY COVERED IN PRODUCT APPROVALS WILL NEED
 SITE-SPECIFIC ENGINEERING.
 3. FBC B 107.2.1 SUBMITTED PRODUCT APPROVAL FL5259-R34
 HAS BEEN REVISED TO FL5259-R35. PLEASE PROVIDE A
 COMPLETE SET; IT COVERS MULTIPLE PRODUCT TYPES; ROOF
 COVER OPTIONS; ALLOWABLE UNDERLAYMENT/TILE-ADHESIVE
 COMBINATIONS, ALLOWABLE SUBSTRATES & ATTACHMENT
 LIMITATIONS. SELECT OPTIONS FROM EACH CATEGORY TO BE
 USED. ALL APPLICABLE DETAILS AND ATTACHMENTS MUST BE
 CLEARLY IDENTIFIED ON THE PRODUCT APPROVAL DRAWINGS.
 DETAILS AND ATTACHMENTS NOT SPECIFICALLY COVERED IN
 PRODUCT APPROVALS WILL NEED SITE-SPECIFIC ENGINEERING.
  
 PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED
 MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS.
  
Review Stop I INCOMING/PROCESSING
Rev No 4 Status N Date 2022-11-01 Cont ID  
Sent By jbrooks Date 2022-11-01 Time 09:32 Rev Time 0.00
Received By jbrooks Date 2022-10-25 Time 06:11 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 3 Status N Date 2022-10-19 Cont ID  
Sent By jbrooks Date 2022-10-19 Time 12:07 Rev Time 0.00
Received By jbrooks Date 2022-10-11 Time 07:07 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2022-09-15 Cont ID  
Sent By medwards Date 2022-09-15 Time 07:12 Rev Time 0.00
Received By medwards Date 2022-09-06 Time 13:13 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date 2022-08-26 Cont ID  
Sent By jbrooks Date 2022-08-26 Time 09:30 Rev Time 0.00
Received By jbrooks Date 2022-08-25 Time 10:20 Sent To  
Notes
***NONE***


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved