Plan Review Details - Permit 20080654
Plan Review Stops For Permit 20080654
Review Stop B BUILDING (STRUCTURAL)
Rev No 3 Status P Date 2020-11-24 Cont ID  
Sent By rmcphers Date 2020-11-24 Time 12:45 Rev Time 0.00
Received By rmcphers Date 2020-11-24 Time 12:45 Sent To  
Notes
***NONE***
Review Stop B BUILDING (STRUCTURAL)
Rev No 2 Status F Date 2020-11-12 Cont ID  
Sent By rmcphers Date 2020-11-12 Time 11:01 Rev Time 0.00
Received By rmcphers Date 2020-11-12 Time 10:54 Sent To  
Notes
2020-11-12 11:01:25SEE COMMENTS AND DRAWING IN 20080620
Review Stop B BUILDING (STRUCTURAL)
Rev No 1 Status F Date 2020-09-30 Cont ID  
Sent By rmcphers Date 2020-09-30 Time 13:31 Rev Time 0.00
Received By rmcphers Date 2020-09-30 Time 10:45 Sent To  
Notes
2020-09-30 13:32:57SEE COMMENTS AND DRAWING IN 20080620
Review Stop E ELECTRICAL
Rev No 1 Status P Date 2020-09-24 Cont ID  
Sent By jleahy Date 2020-09-24 Time 11:18 Rev Time 0.00
Received By jleahy Date 2020-09-24 Time 10:49 Sent To  
Notes
***NONE***
Review Stop G GAS REVIEW
Rev No 2 Status P Date 2020-11-02 Cont ID  
Sent By lcrespo Date 2020-11-02 Time 15:29 Rev Time 0.00
Received By lcrespo Date 2020-11-02 Time 15:29 Sent To  
Notes
2020-11-02 15:30:4011/02/20 REVIEWED FOR CODE COMPLIANCE (GAS)
  
 BY REVIEWING THE PLANS / SPECIFICATIONS FOR CODE
 COMPLIANCE DOES NOT RELIEVE THE OWNER, DESIGN
 PROFESSIONAL, CONTRACTORS, OR THEIR REPRESENTATIVES
 FROM THE RESPONSIBILITY TO COMPLY WITH ALL LOCAL,
 STATE, AND NATIONAL CODES AND STANDARDS IN EFFECT AT
 THE TIME OF PERMIT ISSUANCE. OUR REVIEW IS NOT A CHECK
 OF EVERY ITEM AND DOES NOT PREVENT THIS DEPARTMENT FROM
 REQUIRING CORRECTIONS DURING CONSTRUCTION. ANY CHANGES
 / ALTERATIONS TO APPROVED PLANS SHALL BE APPROVED TO
 AVOID VOIDING OF THE PERMIT.
  
 LUIS A. CRESPO
 PLUMBING PLAN EXAMINER / INSPECTOR
 EMAIL: [email protected] OFFICE: 561 805-6720
  
Review Stop G GAS REVIEW
Rev No 1 Status F Date 2020-09-24 Cont ID  
Sent By lcrespo Date 2020-09-24 Time 10:29 Rev Time 0.00
Received By lcrespo Date 2020-09-24 Time 08:58 Sent To  
Notes
2020-09-24 11:23:5609/24/20 1ST GAS REVIEW**DENIED** WITH COMMENTS
  
 NOTE - A COMPREHENSIVE REVIEW COULD NOT BE DONE AT THIS
 TIME AND ADDITIONAL PLAN REVIEW COMMENTS MAY BE
 GENERATED UPON THE RE-REVIEW OF SUBMITTED CORRECTIONS.
  
 1. A SUB GAS PERMIT IS REQUIRED BY A LICENSED
 CONTRACTOR FOR THE SCOPE OF WORK PER THE WPB AMENDMENTS
 TO THE FBC SEC. 105.1.
  
 2. PLEASE PROVIDE MANUFACTURES SPECIFICATION FOR
 TANK-LESS TO VERIFY BTU AND COMPLIANCE, IF ITS HAS
 CONDENSATE IT WILL NEED TO DRAIN 1' AWAY FROM THE
 STRUCTURE PER THE 2017 FBC SEC. R318.5.
  
 3. THE CITY RECORD HAS A DIFFERENT BTU LOAD FOR THE
 EXISTING GENERATOR AS IT NEEDS TO BE CALCULATED ON THE
 NEW SYSTEM BEFORE AN EVALUATION. PLEASE SUBMIT THE
 MANUFACTURE'S SPECIFICATION OR VERIFY WITH WHAT IS
 INSTALLED PER THE 2017 FBC RES. SEC. G2413.
  
 4. SUBMIT CALCULATIONS FOR COMBUSTION AIR (CLOTHES
 DRYERS) PER THE 2017 FBC RES. SEC. G2407.1 AND G2439.4.
  
 5. SUBMIT MANUFACTURER?S SPECIFICATION
 SHEETS/INSTALLATION MANUAL FOR ALL NEW GAS EQUIPMENT TO
 VERIFY COMPLIANCE WITH 2017 FBC RES. SEC. G2408.1.
  
 6. GAS APPLIANCES SHALL BE LISTED AND LABELED. THE
 INSTALLATION MANUALS FOR ALL GAS APPLIANCES/EQUIPMENT
 SHALL BE ONSITE AT THE TIME OF INSPECTION PER THE 2017
 FBC RES. SEC. G2413.2 AND G2404.3.
  
 7. THE SIZING TABLE USED IN THE DESIGN FOR THE GAS
 SYSTEM IS NOT CLEAR FOR THE CORRECT TABLE NUMBER IN THE
 DESIGN OF THIS SYSTEM PER THE WPB AMENDMENTS TO FBC
 SEC.107.2.1.
  
 8. THE PLANS INDICATE AN EXISTING GAS METER. THE BTU
 LOAD OF THE EXISTING GAS SYSTEM MUST BE ADDED INTO THE
 TOTAL BTU LOAD ON THE SYSTEM ON THE ISOMETRIC AND
 LEGEND TO ENSURE THE EXISTING SYSTEM IS PROPERLY SIZED.
 IF UNDERSIZED, THE EXISTING SYSTEM MUST BE REDONE TO
 ENSURE A SAFE OPERATING SYSTEM. 2017 FBC RES. SECS.
 G2412.4, G2412.8, G2413.1, G2413.2, G2413.3. NOTE THE
 ASSUMED LOAD IS INCORRECT.
  
 9. SUBMIT MANUFACTURER?S SPECIFICATIONS FOR THE
 PRESSURE REGULATORS PER THE 2017 FBC RES. SEC. G2421.1.
  
 10. PLEASE SHOW AND LABEL ALL UNIONS IN FRONT OF
 REGULATOR 1? OF EITHER SIDE PER THE 2017 FBC RES. SEC
 G2421.2.
  
 11. PLEASE SHOW AND OR LABEL THE SHUTOFF VALVE,
 REGULATOR, AND DRIP LEG ON GAS ISOMERIC PER THE 2017
 FBC RES. SEC. G2401.1.3.
  
 12. PLEASE SHOW THE LOCATION AND DISTANCE OF ANY
 OPERABLE DOORS OR WINDOWS IN RELATION TO THE WATER
 HEATER. THE LOCATION OF THE WATER HEATER SHALL COMPLY
 WITH THE MANUFACTURER'S INSTALLATION INSTRUCTIONS PER
 THE WPB AMENDMENTS TO THE FBC SEC. 107.2.1. INFORMATION
 ON CONSTRUCTION DOCUMENTS.
  
 HTTPS://CODES.ICCSAFE.ORG/CATEGORY/FLORIDA?YEAR%5B%5D=C
 URRENT+ADOPTION&PAGE=1
  
 WHEN RESUBMITTING PLANS PLEASE INDICATE THE REVISION &
 REMOVE ANY VOIDED SHEETS & REPLACE ANY PAGES AS
 NECESSARY. A TRANSMITTAL LETTER LISTING THE ORIGINAL
 REVIEW COMMENT NUMBER, WITH A DESCRIPTION OF THE
 REVISION, MADE, IDENTIFYING THE SHEET OR SPECIFICATION
 PAGE WHERE THE CHANGES CAN BE FOUND WILL HELP TO
 EXPEDITE YOUR PERMIT. THANK YOU FOR YOUR ANTICIPATED
 COOPERATION.
  
 LUIS A. CRESPO
 PLUMBING PLAN EXAMINER / INSPECTOR
 EMAIL: [email protected] OFFICE: 561 805-6720
  
Review Stop HIST HISTORICAL
Rev No 2 Status P Date 2020-10-26 Cont ID  
Sent By aborngra Date 2020-10-26 Time 11:58 Rev Time 0.00
Received By aborngra Date 2020-10-26 Time 11:58 Sent To  
Notes
2020-10-26 11:58:40THE PERMIT HAS BEEN APPROVED WITH THE FOLLOWING
 CONDITION(S):
  
 1. ALL EXTERIOR DOOR AND WINDOW FRAMES SHALL HAVE WHITE
 OR BRONZE FINISH.
 2. ALL MUNTINS SHALL HAVE AN EXTERNAL DIMENSIONAL
 PROFILE. FOR PGT PRODUCTS THIS IS A RAISED PYRAMID. FOR
 OTHER PRODUCTS, THE PRODUCT MUST HAVE AN OGEE OR A
 PYRAMID.
 3. ALL GLASS SHALL BE CLEAR GLASS OR CLEAR GLASS WITH
 LOW-E COATING. A NON-STREET FACING BATHROOM MAY HAVE
 OBSCURED TEXTURED GLASS.
 4. SEPARATE PERMIT REQUIRED FOR FENCE/WALL, AWNINGS,
 SIGNS, PARKING LOT, GENERATOR, MECHANICAL/AC/POOL
 EQUIPMENT, DUMPSTER ENCLOSURE, IRRIGATION, LANDSCAPE,
 OTHER _____________
 5. THE ACCESSORY STRUCTURE AND THE ADDITION TO THE MAIN
 HOUSE SHALL FEATURE A SLIGHTLY LESS TEXTURED STUCCO
 FINISH THAN THE EXISTING STUCCO FINISH ON THE MAIN
 HOUSE TO DIFFERENTIATE IT FROM THE ORIGINAL STUCCO
 FINISH.
 6. A SCORE LINE OF APPROXIMATELY 3/4 OF AN INCH SHALL
 BE ADDED ON THE MAIN HOUSE TO DIFFERENTIATE THE
 ADDITION FROM THE ORIGINAL PORTION OF THE HOUSE.
  
  
Review Stop HIST HISTORICAL
Rev No 1 Status P Date 2020-09-14 Cont ID  
Sent By aborngra Date 2020-09-14 Time 16:32 Rev Time 0.00
Received By aborngra Date 2020-09-14 Time 16:32 Sent To  
Notes
2020-09-14 16:32:46THE PERMIT HAS BEEN APPROVED WITH THE FOLLOWING
 CONDITION(S):
  
 1. ALL EXTERIOR DOOR AND WINDOW FRAMES SHALL HAVE WHITE
 OR BRONZE FINISH.
 2. ALL MUNTINS SHALL HAVE AN EXTERNAL DIMENSIONAL
 PROFILE. FOR PGT PRODUCTS THIS IS A RAISED PYRAMID. FOR
 OTHER PRODUCTS, THE PRODUCT MUST HAVE AN OGEE OR A
 PYRAMID.
 3. ALL GLASS SHALL BE CLEAR GLASS OR CLEAR GLASS WITH
 LOW-E COATING. A NON-STREET FACING BATHROOM MAY HAVE
 OBSCURED TEXTURED GLASS.
 4. SEPARATE PERMIT REQUIRED FOR FENCE/WALL, AWNINGS,
 SIGNS, PARKING LOT, GENERATOR, MECHANICAL/AC/POOL
 EQUIPMENT, DUMPSTER ENCLOSURE, IRRIGATION, LANDSCAPE,
 OTHER _____________
 5. THE ACCESSORY STRUCTURE AND THE ADDITION TO THE MAIN
 HOUSE SHALL FEATURE A SLIGHTLY LESS TEXTURED STUCCO
 FINISH THAN THE EXISTING STUCCO FINISH ON THE MAIN
 HOUSE TO DIFFERENTIATE IT FROM THE ORIGINAL STUCCO
 FINISH.
 6. A SCORE LINE OF APPROXIMATELY 3/4 OF AN INCH SHALL
 BE ADDED ON THE MAIN HOUSE TO DIFFERENTIATE THE
 ADDITION FROM THE ORIGINAL PORTION OF THE HOUSE.
 7. THE REAR ACCESSORY STRUCTURE SHALL HAVE A 6-FOOT ?
 5-INCH SETBACK INSTEAD OF THE 9-FOOT SETBACK INDICATED
 IN THE PROJECT DATA TABLE.
  
Review Stop I INCOMING/PROCESSING
Rev No 5 Status N Date 2020-11-24 Cont ID  
Sent By ccarvaja Date 2020-11-24 Time 14:25 Rev Time 0.00
Received By ccarvaja Date 2020-11-19 Time 11:52 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 4 Status N Date 2020-11-12 Cont ID  
Sent By shill Date 2020-11-12 Time 14:41 Rev Time 0.00
Received By shill Date 2020-10-26 Time 12:41 Sent To  
Notes
2020-10-26 12:52:05ROUTED TO BUILDING DIV AUDIT
Review Stop I INCOMING/PROCESSING
Rev No 3 Status N Date 2020-10-26 Cont ID  
Sent By cpuell Date 2020-10-26 Time 12:13 Rev Time 0.00
Received By cpuell Date 2020-10-21 Time 08:13 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2020-10-01 Cont ID  
Sent By lmarchan Date 2020-10-01 Time 08:00 Rev Time 0.00
Received By lmarchan Date 2020-09-23 Time 16:06 Sent To  
Notes
2020-09-23 16:06:26PLANS UNDER 20080620
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date 2020-09-23 Cont ID  
Sent By lmarchan Date 2020-09-23 Time 16:06 Rev Time 0.00
Received By lmarchan Date 2020-09-11 Time 08:16 Sent To  
Notes
2020-08-13 17:29:17PLANS UNDER PERMIT 20080620
Review Stop IMPACT COUNTY IMPACT FEES
Rev No 1 Status P Date 2020-09-24 Cont ID  
Sent By lmarchan Date 2020-09-24 Time 09:33 Rev Time 0.00
Received By lmarchan Date 2020-09-23 Time 16:06 Sent To  
Notes
2020-09-24 09:33:53RECEIPT MU 2020-37211 - NO FEES DUE
Review Stop M MECHANICAL (A/C)
Rev No 2 Status P Date 2020-09-24 Cont ID  
Sent By medwards Date 2020-09-24 Time 14:16 Rev Time 0.00
Received By medwards Date 2020-09-24 Time 14:16 Sent To  
Notes
***NONE***
Review Stop M MECHANICAL (A/C)
Rev No 1 Status F Date 2020-09-24 Cont ID  
Sent By medwards Date 2020-09-24 Time 08:22 Rev Time 0.00
Received By medwards Date 2020-09-24 Time 07:20 Sent To  
Notes
2020-09-24 08:23:341ST REVIEW FBC-2017 MECHANICAL
 PERMIT-20080620
  
 CODES IN EFFECT:
  
 FBC M- FLORIDA MECHANICAL CODE SIXTH EDITION 2017
 FBC EC- FLORIDA ENERGY CONSERVATION CODE SIXTH EDITION
 2017
 FBC EX- FLORIDA EXISTING BUILDING CODE SIXTH EDITION
 2017
 FBC RES- FLORIDA RESIDENTIAL BUILDING CODE SIXTH
 EDITION 2017
 FS- FLORIDA STATUTES
 FAC- FLORIDA ADMINISTRATIVE CODE
 WPB- WEST PALM BEACH AMENDMENTS TO THE FBC SIXTH
 EDITION 2017
  
 PLAN REVIEW RESULTS: DENIED.
  
 1) SHEET A-1 INDICATES A NEW ADDITION TO THE EXISTING
 HOUSE, SHEET M.1 DOES NOT SHOW HOW THIS NEW ADDITION IS
 TO BE CONDITIONED. PLEASE A MECHANICAL SHEET SHOWING
 THE MECHANICAL SYSTEM FOR THIS NEW ADDITION. FBC FS
 107.2.1
  
 2) PLEASE PROVIDE AN ENERGY ANALYSIS OF THE NEW
 ADDITION TO THE EXISTING HOUSE. FBC EC 101.5.1.1.2
  
 3) PLEASE PROVIDE A MANUAL J FOR THE NEW ADDITION TO
 THE EXISTING HOUSE. FBC EC R403.7
  
 4) PLEASE PROVIDE A NOTE ON THE DRAWING INDICATING THAT
 THE AHU IN THE ATTIC MUST MEET SECTION R4.3.3.6 OF THE
 FBC EC.
  
  
 THIS PROJECT HAS THE PLANS FOR PERMIT#20080654
  
  
 WHEN RESUBMITTING, IT IS HELPFUL TO PROVIDE A RESPONSE
 LETTER ADDRESSING EACH ITEM ALONG WITH THE CITY
 RE-SUBMITTAL FORM. ADDITIONALLY, PLEASE INSERT
 CORRECTED PLAN SHEETS INTO THE SETS, REMOVE THE OLD
 SHEETS FROM THE PLAN SETS, BIND THEM TOGETHER
 SEPARATELY AND MARK VOID OR OLD ON THEM. PLEASE RETAIN
 THEM FOR REFERENCE WITH THE NEW SUBMITTED PLANS. THIS
 PROCESS WILL ALSO APPLY TO ANY DOCUMENTS SUCH AS
 PRODUCT APPROVALS OR CALCULATIONS BEING REPLACED OR
 UPDATED.
  
  
 MICHAEL EDWARDS
 MECHANICAL EXAMINER
 401 CLEMATIS STREET
 WEST PALM BEACH FL. 33401
 561-805-6728
 [email protected]
  
Review Stop P PLUMBING
Rev No 2 Status P Date 2020-11-02 Cont ID  
Sent By lcrespo Date 2020-11-02 Time 15:30 Rev Time 0.00
Received By lcrespo Date 2020-11-02 Time 15:30 Sent To  
Notes
2020-11-02 15:31:3111/02/20 REVIEWED FOR CODE COMPLIANCE (PLUMBING)
  
 BY REVIEWING THE PLANS / SPECIFICATIONS FOR CODE
 COMPLIANCE DOES NOT RELIEVE THE OWNER, DESIGN
 PROFESSIONAL, CONTRACTORS, OR THEIR REPRESENTATIVES
 FROM THE RESPONSIBILITY TO COMPLY WITH ALL LOCAL,
 STATE, AND NATIONAL CODES AND STANDARDS IN EFFECT AT
 THE TIME OF PERMIT ISSUANCE. OUR REVIEW IS NOT A CHECK
 OF EVERY ITEM AND DOES NOT PREVENT THIS DEPARTMENT FROM
 REQUIRING CORRECTIONS DURING CONSTRUCTION. ANY CHANGES
 / ALTERATIONS TO APPROVED PLANS SHALL BE APPROVED TO
 AVOID VOIDING OF THE PERMIT.
  
 LUIS A. CRESPO
 PLUMBING PLAN EXAMINER / INSPECTOR
 EMAIL: [email protected] OFFICE: 561 805-6720
  
Review Stop P PLUMBING
Rev No 1 Status P Date 2020-09-24 Cont ID  
Sent By lcrespo Date 2020-09-24 Time 08:50 Rev Time 0.00
Received By lcrespo Date 2020-09-24 Time 07:57 Sent To  
Notes
2020-09-24 09:16:04PLANS UNDER 315 DYER RD, PERMIT 20080620 FOR PLUMBING
 AND GAS
Review Stop PRIVATEPRV PRIVATE PROVIDER DOCUMENTS
Rev No 4 Status N Date 2022-11-17 Cont ID  
Sent By shill Date 2022-11-17 Time 15:48 Rev Time 0.00
Received By shill Date 2022-11-17 Time 15:48 Sent To  
Notes
***NONE***
Review Stop PRIVATEPRV PRIVATE PROVIDER DOCUMENTS
Rev No 3 Status P Date 2020-11-24 Cont ID  
Sent By rgathrig Date 2020-11-24 Time 13:21 Rev Time 0.00
Received By rgathrig Date 2020-11-24 Time 13:21 Sent To  
Notes
***NONE***
Review Stop PRIVATEPRV PRIVATE PROVIDER DOCUMENTS
Rev No 2 Status F Date 2020-11-12 Cont ID  
Sent By rgathrig Date 2020-11-12 Time 13:37 Rev Time 0.00
Received By rgathrig Date 2020-11-12 Time 13:36 Sent To  
Notes
2020-11-12 13:37:38PP REVIEW NOT APPROVED SEE NOTES UNDER 20080654
Review Stop PRIVATEPRV PRIVATE PROVIDER DOCUMENTS
Rev No 1 Status F Date 2020-10-01 Cont ID  
Sent By rgathrig Date 2020-10-01 Time 13:57 Rev Time 0.00
Received By rgathrig Date 2020-10-01 Time 13:55 Sent To  
Notes
2020-10-01 13:56:57PRIVATE PROVIDER REVIEW FOR PERMITS 20080654 AND
 20080620 IS DENIED.
 FS 553.791
 PAPERWORK FOR PRIVATE PROVIDER, INSURANCE AND
 INSPECTORS IS OK.
 NEW PLAN REVIEW AFFIDAVITS WILL BE REQUIRED TO ADDRESS
 ALL THE PERMIT DOCUMENTS WHEN THE NEW PLANS AND
 DOCUMENTS ARE SUBMITTED TO ADDRESS THE PLAN REVIEW
 COMMENTS.
 WHEN THE NEW AFFIDAVITS ARE SUBMITTED, THE AFFIDAVITS
 MUST IDENTIFY THE PLANS AND DOCUMENTS REVIEWED. NAME OF
 DOCUMENT, DATE OF DOCUMENT, DESIGNER OF DOCUMENT, PAGE
 NUMBER OF DOCUMENTS, ETC. IS REQUIRED TO BE LISTED ON
 THE PLAN REVIEW COMPLIANCE AFFIDAVIT.
 IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT THE REVIEWER
 RICHARD GATHRIGHT
 [email protected]
 561-805-6679
  
  
Review Stop R ROOF PLAN REVIEW
Rev No 2 Status P Date 2020-11-12 Cont ID  
Sent By rmcphers Date 2020-11-12 Time 11:02 Rev Time 0.00
Received By rmcphers Date 2020-11-12 Time 11:02 Sent To  
Notes
***NONE***
Review Stop R ROOF PLAN REVIEW
Rev No 1 Status F Date 2020-09-30 Cont ID  
Sent By rmcphers Date 2020-09-30 Time 13:33 Rev Time 0.00
Received By rmcphers Date 2020-09-30 Time 13:33 Sent To  
Notes
2020-09-30 13:34:29SEE COMMENTS IN 20080620
Review Stop SIGNATURE ELECTRONIC SIGNATURE SHEET
Rev No 2 Status N Date 2020-11-12 Cont ID  
Sent By rmcphers Date 2020-11-12 Time 11:01 Rev Time 0.00
Received By rmcphers Date 2020-11-12 Time 11:01 Sent To  
Notes
2020-11-12 11:02:13NO DRAWINGS IN PROJECTDOX
Review Stop SIGNATURE ELECTRONIC SIGNATURE SHEET
Rev No 1 Status N Date 2020-09-24 Cont ID  
Sent By medwards Date 2020-09-24 Time 14:16 Rev Time 0.00
Received By medwards Date 2020-09-24 Time 14:16 Sent To  
Notes
***NONE***
Review Stop Z ZONING
Rev No 2 Status P Date 2020-10-26 Cont ID  
Sent By aborngra Date 2020-10-26 Time 11:58 Rev Time 0.00
Received By aborngra Date 2020-10-26 Time 11:57 Sent To  
Notes
2020-10-26 11:58:14THE PERMIT HAS BEEN APPROVED WITH THE FOLLOWING
 CONDITION(S):
  
 1. ALL EXTERIOR DOOR AND WINDOW FRAMES SHALL HAVE WHITE
 OR BRONZE FINISH.
 2. ALL MUNTINS SHALL HAVE AN EXTERNAL DIMENSIONAL
 PROFILE. FOR PGT PRODUCTS THIS IS A RAISED PYRAMID. FOR
 OTHER PRODUCTS, THE PRODUCT MUST HAVE AN OGEE OR A
 PYRAMID.
 3. ALL GLASS SHALL BE CLEAR GLASS OR CLEAR GLASS WITH
 LOW-E COATING. A NON-STREET FACING BATHROOM MAY HAVE
 OBSCURED TEXTURED GLASS.
 4. SEPARATE PERMIT REQUIRED FOR FENCE/WALL, AWNINGS,
 SIGNS, PARKING LOT, GENERATOR, MECHANICAL/AC/POOL
 EQUIPMENT, DUMPSTER ENCLOSURE, IRRIGATION, LANDSCAPE,
 OTHER _____________
 5. THE ACCESSORY STRUCTURE AND THE ADDITION TO THE MAIN
 HOUSE SHALL FEATURE A SLIGHTLY LESS TEXTURED STUCCO
 FINISH THAN THE EXISTING STUCCO FINISH ON THE MAIN
 HOUSE TO DIFFERENTIATE IT FROM THE ORIGINAL STUCCO
 FINISH.
 6. A SCORE LINE OF APPROXIMATELY 3/4 OF AN INCH SHALL
 BE ADDED ON THE MAIN HOUSE TO DIFFERENTIATE THE
 ADDITION FROM THE ORIGINAL PORTION OF THE HOUSE.
  
  
Review Stop Z ZONING
Rev No 1 Status P Date 2020-09-14 Cont ID  
Sent By aborngra Date 2020-09-14 Time 16:33 Rev Time 0.00
Received By aborngra Date 2020-09-14 Time 16:33 Sent To  
Notes
2020-09-14 16:33:04THE PERMIT HAS BEEN APPROVED WITH THE FOLLOWING
 CONDITION(S):
  
 1. ALL EXTERIOR DOOR AND WINDOW FRAMES SHALL HAVE WHITE
 OR BRONZE FINISH.
 2. ALL MUNTINS SHALL HAVE AN EXTERNAL DIMENSIONAL
 PROFILE. FOR PGT PRODUCTS THIS IS A RAISED PYRAMID. FOR
 OTHER PRODUCTS, THE PRODUCT MUST HAVE AN OGEE OR A
 PYRAMID.
 3. ALL GLASS SHALL BE CLEAR GLASS OR CLEAR GLASS WITH
 LOW-E COATING. A NON-STREET FACING BATHROOM MAY HAVE
 OBSCURED TEXTURED GLASS.
 4. SEPARATE PERMIT REQUIRED FOR FENCE/WALL, AWNINGS,
 SIGNS, PARKING LOT, GENERATOR, MECHANICAL/AC/POOL
 EQUIPMENT, DUMPSTER ENCLOSURE, IRRIGATION, LANDSCAPE,
 OTHER _____________
 5. THE ACCESSORY STRUCTURE AND THE ADDITION TO THE MAIN
 HOUSE SHALL FEATURE A SLIGHTLY LESS TEXTURED STUCCO
 FINISH THAN THE EXISTING STUCCO FINISH ON THE MAIN
 HOUSE TO DIFFERENTIATE IT FROM THE ORIGINAL STUCCO
 FINISH.
 6. A SCORE LINE OF APPROXIMATELY 3/4 OF AN INCH SHALL
 BE ADDED ON THE MAIN HOUSE TO DIFFERENTIATE THE
 ADDITION FROM THE ORIGINAL PORTION OF THE HOUSE.
 7. THE REAR ACCESSORY STRUCTURE SHALL HAVE A 6-FOOT ?
 5-INCH SETBACK INSTEAD OF THE 9-FOOT SETBACK INDICATED
 IN THE PROJECT DATA TABLE.
  


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved