| 2020-03-16 17:23:43 | RESIDENTIAL (R3) SUBMITTAL BUILDING REVIEW COMMENTS |
| | CODE: FBC 6TH EDITION (2017) AND CITY AMENDMENTS. |
| | |
| | 1- BUILDING REVIEW WAS ORIGINALLY APPROVED ON |
| | 06/06/2019 WITH A PROVISO. THE PROVISO WAS TO ALLOW |
| | CONTRACTOR TO OBTAIN THE PERMIT.AND TO SUBMIT THE |
| | REQUIRED INFORMATION PRIOR TO INSPECTIONS. AS OF TODAY |
| | THE INFORMATION REQUESTED ON THE PROVISO HAS NOT BEEN |
| | SUBMITTED. PLEASE PROVIDE ALL THE INFORMATION REQUESTED |
| | ON THE PROVISO. SEE COPY OF PROVISO BELOW: |
| | |
| | BUILDING REVIEW APPROVED WITH PROVISO: |
| | 1- SPECIFY ALL STRUCTURAL CONNECTORS FOR ALL INFILL |
| | EXTERIOR WALLS IN NEW KITCHEN. |
| | 2- PROVIDE PRODUCT APPROVAL (2 COPIES) FOR: |
| | A) SINGLE HUNG WINDOW SIZE (5'-2"WIDTH X 4'-6" HEIGHT ) |
| | SPECIFIED ON THE WINDOW SCHEDULE FOR WINDOW W-112. |
| | B) WINDOW MULLIONS (IF USED) PLANS ARE NOT CLEAR. AND, |
| | CLEARLY SPECIF MULLION SIZE TO VERIFY COMPLIANCE WITH |
| | THE CALCULATED DESIGN PRESSURES. |
| | C) FRONT DOOR PRODUCT APPROVAL SUBMITTED IS INCOMPLETE. |
| | NEED TO PROVIDE COMPLETE FLORIDA PRODUCT APPROVAL (2 |
| | COPIES), INCLUDING THE FLORIDA PRODUCT APPROVAL COVER |
| | PAGE THAT CORRESPONDS TO THE DRAWINGS SUBMITTED. THE |
| | FLORIDA PRODUCT APPROVAL IS REQUIRED BECAUSE IT SHOWS |
| | IF PRODUCT IS APPROVED AND CURRENT CODE IN EFFECT. |
| | 3- DESIGNER OF RECORD TO APPROVE ALL PRODUCT APPROVALS. |
| | |
| | PLEASE FEEL FREE TO CONTACT ME IF YOU HAVE ANY |
| | QUESTIONS REGARDING THESE COMMENTS, |
| | JULIO GOMEZ |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | BUILDING DIVISION |
| | (561)805-6712 |
| | [email protected] |
| | |
| | |
| | 10/20/2020 TALKED TO SAMANTHA HILL REVISED COMMENTS. |
| | REMOVED INSPECTIONS PRIVATE PROVIDER COMMENT #1. |
| | INSPECTIONS BY PRIVATE PROVIDER ARE HANDLED BY RICHARD |
| | GATHRIGHT. JG. |
