Plan Review Details - Permit 17120214
Plan Review Stops For Permit 17120214
Review Stop AD ADDRESSING
Rev No 2 Status P Date 2018-01-11 Cont ID  
Sent By shill Date 2018-01-11 Time 16:07 Rev Time 0.00
Received By shill Date 2018-01-11 Time 16:07 Sent To  
Notes
***NONE***
Review Stop AD ADDRESSING
Rev No 1 Status F Date 2018-01-03 Cont ID  
Sent By jgomez Date 2018-01-03 Time 17:18 Rev Time 0.00
Received By jgomez Date 2018-01-03 Time 17:18 Sent To  
Notes
2018-01-03 17:18:48NEED ADDRESS.
Review Stop B BUILDING (STRUCTURAL)
Rev No 3 Status P Date 2018-03-20 Cont ID  
Sent By jgomez Date 2018-03-20 Time 10:19 Rev Time 0.00
Received By jgomez Date 2018-03-20 Time 07:48 Sent To  
Notes
2018-03-20 08:09:1503/19/18
 HELLO MR. GOMEZ, THIS IS CHRIS WISE WITH LEGACY
 BROTHERS LLC. WE WOULD LIKE TO PROCEED WITH THE PERMIT
 ISSUANCE UNDER PROVISIO, PENDING THE ZONING APPROVAL. I
 SPOKE TO ANGELA AND SHE WILL BE GETTING BACK WITH ME
 TODAY TO FINALIZE. THANK YOU! IF YOU NEED ME FOR
 ANYTHING PLEASE DON?T HESITATE TO REACH OUT.
 CHRIS WISE
 (912)484-0721
 LEGACY BROTHERS LLC
  
  
  
 BUILDING REVIEW APPROVED WITH PROVISO (PROVIDE INFO.
 PRIOR TO INSPECTIONS):
 1- PROVIDE DRAINAGE PLAN.
 2- REVISE THE ATTIC LIVE LOAD ON SHEET T-1 TO COMPLY
 WITH TABLE R301.5 FBC-RESIDENTIAL. (DROP STAIRS. SEE
 SHEET 1).
 3- REVISE STRUCTURAL NOTE #3 ON SHEET T-1. ASTM C 1063
 REQUIRES NAILS THAT PROVIDE MIN. 1-3/4" PENETRATION
 INTO HORIZONTAL FRAMING MEMBERS. STAPLES WITH 7/8" LEGS
 DON'T COMPLY.
 4- ENERGY CALCULATIONS: (1)NEED FORM R405-2014 NOT
 2017. (2)BUILDER NAME IS INCORRECT. (3) NEED THE NAME
 OF THE PERSON-PREPARING THEM.
 5- PROVIDE PRODUCT APPROVAL (2 COPIES) WITH LEGIBLE
 DWGS FOR: (1)ENTRY DOOR THAT MEETS THE DESIGN
 PRESSURES. (2) SINGLE HUNG WINDOWS. (3) SLIDING GLASS
 DOORS. (4)ROOF SHINGLES. (5)PRECAST LINTELS.
 6- DESIGNER OF RECORD TO APPROVE IN WRITING ALL PRODUCT
 APPROVALS.
  
Review Stop B BUILDING (STRUCTURAL)
Rev No 2 Status F Date 2018-03-13 Cont ID  
Sent By jgomez Date 2018-03-12 Time 18:59 Rev Time 0.00
Received By jgomez Date 2018-03-12 Time 17:13 Sent To  
Notes
2018-03-12 17:14:09NEW SINGLE FAMILY RESIDENCE (R3), SECOND BUILDING
 REVIEW CHECKLIST.
 CODE: FBC 5TH EDITION (2014).
  
  
 NOTE:
 BUILDING REVIEW MAY BE APPROVED WITH PROVISO. PROVISO
 MEANS CONTRACTOR WILL SUBMIT REQUIRED INFORMATION AFTER
 THE PERMIT IS ISSUED BUT BEFORE INSPECTIONS TO AVOID
 CONFLICTS/DELAYS. REVISION FEES MAY APPLY. CONTRACTOR
 TO ADVICE IF PROVISO OPTION IS PREFERRED AT THIS TIME
 OR IF RE-SUBMITTING REQUIRED INFORMATION BEFORE PERMIT
 ISSUANCE.
  
  
  
  
 1- REVISE THE GRAVITY LOADS SPECIFIED ON SHEET T-1.
 NEED TO REVISE THE ATTIC LIVE LOAD TO COMPLY WITH TABLE
 R301.5 FBC-RESIDENTIAL.
 RESPONSE: ACCORDING TO PLANS SUBMITTED IT LOOKS LIKE
 THE ATTIC ABOVE GARAGE IS GOING TO BE USED FOR STORAGE.
 SEE SIZE OF ATTIC ACCESS AND OPTIONAL DROP STAIRS.
 REVISE LOADS ACCORDINGLY. SEE TABLE R301.5 FOR REQUIRED
 LIVE LOADS AND REVISE AS REQUIRED. NOTE: REVISE LOADING
 CRITERIA SHOWN ON TRUSS LAYOUT SUBMITTED TO MATCH
 ENGINEER OF RECORD PROPOSED DESIGN CRITERIA.
  
 2- REVISE STRUCTURAL NOTE #3 ON SHEET T-1. ACCORDING TO
 ASTM C 1063 THE HIGH RIB METAL LATH NEED TO BE NAILED
 WITH NAILS OR STAPLES THAT PROVIDE MIN. 1-3/4"
 PENETRATION INTO THE ROOF TRUSS (HORIZONTAL FRAMING
 MEMBERS).
 RESPONSE: NOTE #3 CALLS FOR OPTIONAL STAPLES WITH 7/8"
 LEGS. THIS STAPLES DON'T COMPLY. REVISE AS REQUIRED.
  
 3- ENERGY CALCULATIONS SUBMITTED:
 NEW COMMENT:
 A) FORM R405-2017 SUBMITTED NOW IS INCORRECT. THIS FORM
 IS FOR THE 2017 CODE. THIS BUILDING IS BEING REVIEWED
 UNDER THE 2014 CODE. PROVIDE CORRECT FORM. SEC.
 R101.5.1.1.2 FBC-ENERGY CONSERVATION.
  
 B) BUILDER NAME IS INCORRECT. IT DOESN'T MATCH BUILDER
 SHOWN ON THE PERMIT APPLICATION. REVISE AS REQUIRED.
 SEC. R101.5.1.1.2 FBC-ENERGY CONSERVATION, 5TH EDITION
 (2014).
  
 C) PROVIDE THE NAME OF THE PERSON RESPONSIBLE FOR THE
 DESIGN AS REQUIRED BY SEC. R405.4.2 FBC-ENERGY
 CONSERVATION.
 REPEAT COMMENT. NOT ADDRESSED AT ALL.
  
 NOTE:
 LABEL REQUIRED FOR DOORS AND WINDOWS SHOWING THE
 U-FACTOR AND SHGC FACTOR SPECIFIED IN THE ENERGY
 CALCULATIONS IS REQUIRED WHEN THE CALCULATIONS DON'T
 USE THE PROGRAM'S DEFAULT FACTOR.
  
 4- PROVIDE PRODUCT APPROVAL (2 COPIES) AS REQUIRED BY
 FAC 61G20-3.001 FOR:
 A) ENTRY DOOR WITH SIDELITE AS SHOWN ON PLANS. NEED
 DOOR THAT MEETS OR EXCEEDS THE CALCULATED DESIGN
 PRESSURES. DRAWING MA-FL0222-17 SUBMITTED DOESN'T MEET
 THEM. NOTE: ALSO, PROVIDE COMPLETE PRODUCT APPROVAL
 INCLUDING THE FLORIDA PRODUCT APPROVAL COVER PAGE THAT
 CORRESPONDS TO DRAWINGS SUBMITTED. OR PROVIDE MIAMI
 DADE NOA. OR MANUFACTURER MAY SUBMIT COMPLETE
 ENGINEERING PACKAGE FOR SITE SPECIFIC INSTALLATION.
 SUBMIT TWO COPIES. ALSO, DRAWINGS ARE NOT LEGIBLE
 BECAUSE THEY ARE TOO SMALL. PRINT DRAWINGS IN LANDSCAPE
 FORMAT SO THEY USE THE WHOLE PAPER AND ARE MORE
 LEGIBLE.
  
 B) SINGLE HUNG WINDOWS AS SHOWN ON PLANS. SUBMIT TWO
 COPIES OF NOA 15-0602.06. ONLY ONE WAS SUBMITTED. ALSO,
 DRAWINGS ARE NOT LEGIBLE BECAUSE THEY ARE TOO SMALL.
 PRINT DRAWINGS IN LANDSCAPE FORMAT SO THEY USE THE
 WHOLE PAPER AND ARE MORE LEGIBLE.
  
 C) SLIDING GLASS DOORS AS SHOWN ON PLANS. NOTE: PROVIDE
 COMPLETE PRODUCT APPROVAL INCLUDING THE FLORIDA PRODUCT
 APPROVAL COVER PAGE THAT CORRESPONDS TO DRAWINGS
 SUBMITTED. OR PROVIDE MIAMI DADE NOA. OR MANUFACTURER
 MAY SUBMIT COMPLETE ENGINEERING PACKAGE FOR SITE
 SPECIFIC INSTALLATION. SUBMIT TWO COPIES. ALSO,
 DRAWINGS ARE NOT LEGIBLE BECAUSE THEY ARE TOO SMALL.
 PRINT DRAWINGS IN LANDSCAPE FORMAT SO THEY USE THE
 WHOLE PAPER AND ARE MORE LEGIBLE.
  
 D) ROOF SHINGLES AS SHOWN ON PLANS. SUBMIT TWO COPIES
 OF NOA 12-1127.03. ONLY ONE WAS SUBMITTED.
  
 E) PRECAST LINTELS AS SPECIFIED ON PLANS. REPEAT
 COMMENT.
  
 5- DESIGNER OF RECORD TO REVIEW AND APPROVE IN WRITING
 (NOT SIGNING AND SEALING) ALL PRODUCT APPROVALS AS
 REQUIRED BY SEC. 107.3.4.1 CITY AMENDMENTS.
  
 6- PROVIDE DRAINAGE PLAN SHOWING COMPLIANCE WITH SEC.
 R401.3 FBC-RESIDENTIAL.
 R401.3 DRAINAGE: SURFACE DRAINAGE SHALL BE DIVERTED TO
 A STORM SEWER CONVEYANCE OR OTHER APPROVED POINT OF
 COLLECTION THAT DOES NOT CREATE A HAZARD. LOTS SHALL BE
 GRADED TO DRAIN SURFACE WATER AWAY FROM FOUNDATION
 WALLS. THE GRADE SHALL FALL A MINIMUM OF 6 INCHES (152
 MM) WITHIN THE FIRST 10 FEET (3048 MM).
  
 ****PLEASE PROVIDE RESPONSE LETTEER ADDRESSING EACH
 COMMENT TO HELP EXPEDITE THE REVIEW PROCESS.
 ****PLEASE INSERT ANY REVISED DRAWING AND REMOVE OLD
 DRAWING. DON'T STAPLE OLD DRAWINGS. SUBMIT OLD DRAWINGS
 FOR REFERENCE.
  
 IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT
 JULIO GOMEZ
 COMMERCIAL COMBINATION PLANS EXAMINER
 DEVELOPMENT SERVICES DEPARTMENT
 BUILDING DIVISION
 (561)805-6712
 [email protected]
Review Stop B BUILDING (STRUCTURAL)
Rev No 1 Status F Date 2018-01-03 Cont ID  
Sent By jgomez Date 2018-01-03 Time 17:39 Rev Time 0.00
Received By jgomez Date 2018-01-02 Time 12:44 Sent To  
Notes
2018-01-02 13:50:18NEW SINGLE FAMILY RESIDENCE (R3), BUILDING REVIEW
 COMMENTS.
 CODE: FBC 5TH EDITION (2014).
  
 1- AFTER PLANS ARE REVISED, BRING THEM TO PALM BEACH
 COUNTY (2300 N. JOG RD.) FOR IMPACT FEE ASSESSMENT.
 BRING BACK COUNTY STAMPED PLANS AND COPY OF PAID
 RECEIPT IF FEES ARE DUE. COUNTY IMPACT FEE ORDINANCE OF
 THE UNIFIED LAND DEVELOPMENT CODE.
  
 2- DRAWINGS NEED TO HAVE THE CORRECT ADDRESS. THE HOUSE
 IS LOCATED ON WINDSOR AVE NOT WINDSOR CT. ALSO, THE
 CORRECT ZIP CODE IS 33407 NOT 33401. THE ASSIGNED
 ADDRESS FOR THIS NEW HOUSE IS 3719 WINDSOR AVE, WEST
 PALM BEACH FL 33407. REVISE INFORMATION ON ALL PLANS AS
 REQUIRED. SEC. 107.2.1 CITY AMENDMENTS.
  
 3- FLOOR PLAN ON SHEET 1.
 A) SPECIFY THE SIZE OF THE ENTRY DOOR TO VERIFY
 COMPLIANCE WITH SEC. R311.2 FBC-RESIDENTIAL, 5TH
 EDITION (2014).
  
 B) SPECIFY SELF CLOSING DEVICE FOR DOOR LEADING FROM
 THE GARAGE TO THE MAIN HOUSE AS REQUIRED BY SEC.
 R302.5.1 FBC RESIDENTIAL.
  
 4- REVISE THE GRAVITY LOADS SPECIFIED ON SHEET T-1.
 NEED TO REVISE THE ATTIC LIVE LOAD TO COMPLY WITH TABLE
 R301.5 FBC-RESIDENTIAL.
  
 5- REVISE STRUCTURAL NOTE #3 ON SHEET T-1. ACCORDING TO
 ASTM C 1063 THE HIGH RIB METAL LATH NEED TO BE NAILED
 WITH NAILS OR STAPLES THAT PROVIDE MIN. 1-3/4"
 PENETRATION INTO THE ROOF TRUSS. THEREFORE THE 1-1/2"
 NAILS DON'T COMPLY. REVISE AS REQUIRED.
  
 6- JOBSITE LOCATION MAP SHOWN ON SHEET D-1 DOESN'T
 CORRESPOND TO PROPOSED LOCATION. REVISE AS REQUIRED.
 SEC. 107.2.1 CITY AMENDMENTS.
  
 7- VALUATION DECLARED IN THE PERMIT APPLICATION IS TOO
 LOW. VALUATION TO INCLUDE ALL LABOR, MATERIALS,
 CONTRACTOR'S OVERHEAD AND PROFIT AND ALL DESIGN
 PROFESSIONAL FEES AS REQUIRED BY SEC. 109.3 CITY
 AMENDMENTS. VALUATION WAS UPDATED TO $215,855. THE
 PERMIT FEE BALANCE IS $4137.66.
  
 8- ENERGY CALCULATIONS SUBMITTED:
 A) PROVIDE COMPLETE INFORMATION ON TOP OF FORM
 INCLUDING THE HOUSE ADDRESS (3719 WINDSOR AVE WPB. FL
 33407), OWNER'S NAME AND BUILDER'S NAME. SEC.
 R101.5.1.1.2 FBC-ENERGY CONSERVATION, 5TH EDITION
 (2014).
  
 B) CONCRETE BLOCK WALL INSULATION SPECIFIED ON ITEM #9
 DOESN'T MATCH PLANS. REVISE AS REQUIRED TO MATCH. SEC.
 R101.5.1.1.2 FBC-ENERGY CONSERVATION.
  
 C) CEILING INSULATION SPECIFIED ON ITEM #10 DOESN'T
 MATCH PLANS. REVISE AS REQUIRED TO MATCH. SEC.
 R101.5.1.1.2 FBC-ENERGY CONSERVATION.
  
 D) PROVIDE THE NAME OF THE PERSON RESPONSIBLE FOR THE
 DESIGN AS REQUIRED BY SEC. R405.4.2 FBC-ENERGY
 CONSERVATION.
  
 E) DOORS INFORMATION ON PAGE 3 OF 4 SPECIFIES AN
 INSULATED DOOR ON THE SOUTH. PLANS DON'T SHOW ANY
 INSULATED DOOR ON THE SOUTH SIDE. CLARIFY WHERE IS THIS
 DOOR LOCATED AT. REVISE AS REQUIRED TO MATCH PLANS.
 SEC. R101.5.1.1.2 FBC-ENERGY CONSERVATION.
  
 F) WINDOWS INFORMATION SHOWN ON PAGE 3 OF 4 DOESN'T
 MATCH PLANS. REVISE THE ORIENTATION, AREA AND OVERHANG
 DEPTH AND SEPARATION TO MATCH PLANS. SEC. R101.5.1.1.2
 FBC-ENERGY CONSERVATION.
  
 G) GARAGE FLOOR AREA AND CEILING AREA SHOWN ON PAGE 3
 OF 4 DOESN'T MATCH PLANS. REVISE AS REQUIRED TO MATCH.
 SEC. R101.5.1.1.2 FBC-ENERGY CONSERVATION.
  
 H) BUILDER TO COMPLETE THE ENERGY PERFORMANCE LEVEL
 (EPL) DISPLAY CARD. SEC. R405.4.3 FBC-ENERGY
 CONSERVATION.
  
 NOTE:
 LABEL REQUIRED FOR DOORS AND WINDOWS SHOWING THE
 U-FACTOR AND SHGC FACTOR SPECIFIED IN THE ENERGY
 CALCULATIONS IS REQUIRED WHEN THE CALCULATIONS DON'T
 USE THE PROGRAM'S DEFAULT FACTOR.
  
 9- PROVIDE PRODUCT APPROVAL (2 COPIES) AS REQUIRED BY
 FAC 61G20-3.001 FOR:
 A) ENTRY DOOR WITH SIDELITE AS SHOWN ON PLANS.
  
 B) OVERHEAD GARAGE DOOR AS SHOWN ON PLANS.
  
 C) SINGLE HUNG WINDOWS AS SHOWN ON PLANS.
  
 D) SLIDING GLASS DOORS AS SHOWN ON PLANS.
  
 E) HURRICANE SHUTTERS IF DOORS AND WINDOWS DON'T HAVE
 IMPACT GLAZING. AND PROVIDE COMPLETE INSTALLATION
 SCHEDULE. SEE CITY SAMPLE.
  
 F) ROOF SHINGLES AS SHOWN ON PLANS.
  
 G) GABLE VENT AS SHOWN ON THE FRONT ELEVATION.
  
 H) PRECAST LINTELS AS SPECIFIED ON PLANS.
  
 10- DESIGNER OF RECORD TO REVIEW AND APPROVE IN WRITING
 (NOT SIGNING AND SEALING) ALL PRODUCT APPROVALS AS
 REQUIRED BY SEC. 107.3.4.1 CITY AMENDMENTS.
  
 11- PROVIDE SITE PLANS OR SURVEY SHOWING THE PROPOSED
 HOUSE AND THE PROPERTY LINES AS REQUIRED BY SEC.
 107.3.5.3(1) CITY AMENDMENTS.
  
 12- PROVIDE COMPLETE DETAILS AND SPECIFICATIONS FOR THE
 COLONIAL SHUTTERS SHOWN ON THE FRONT ELEVATION. SPECIFY
 SHUTTERS MATERIAL AND FASTENING SPECIFICATIONS. SEC.
 R301.1 FBC-RESIDENTIAL.
  
 13- GABLE END DETAIL ON SHEET T-1:
 A) SPECIFY STUCCO THICKNESS (7/8") AS REQUIRED BY TABLE
 R702.1(1) FBC-RESIDENTIAL.
  
 B) SPECIFY TWO LAYERS OF WATER-RESISTIVE BARRIERS AS
 REQUIRED BY SEC. R703.6.3 FBC-RESIDENTIAL.
  
 14- PROVIDE COMPLETE GARAGE DOOR STRUCTURAL BUCK
 DETAIL. SPECIFY BUCK SIZE AND FASTENER TYPE AND
 SPACING. SEC. R301.1 FBC-RESIDENTIAL.
  
 ****PLEASE PROVIDE RESPONSE LETTEER ADDRESSING EACH
 COMMENT TO HELP EXPEDITE THE REVIEW PROCESS.
 ****PLEASE INSERT ANY REVISED DRAWING AND REMOVE OLD
 DRAWING. DON'T STAPLE OLD DRAWINGS. SUBMIT OLD DRAWINGS
 FOR REFERENCE.
  
 IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT
 JULIO GOMEZ
 COMMERCIAL COMBINATION PLANS EXAMINER
 DEVELOPMENT SERVICES DEPARTMENT
 BUILDING DIVISION
 (561)805-6712
 [email protected]
Review Stop E ELECTRICAL
Rev No 2 Status P Date 2018-03-06 Cont ID  
Sent By jpearson Date 2018-03-06 Time 12:59 Rev Time 0.00
Received By jpearson Date 2018-03-06 Time 12:22 Sent To  
Notes
***NONE***
Review Stop E ELECTRICAL
Rev No 1 Status F Date 2018-01-04 Cont ID  
Sent By jpearson Date 2018-01-04 Time 07:40 Rev Time 0.00
Received By jpearson Date 2018-01-04 Time 07:40 Sent To I
Notes
2018-01-04 07:40:23CODES IN EFFECT:
 FBC = FLORIDA BUILDING CODE 2014 5TH EDITION
 FBC EC = FLORIDA BUILDING CODE ENERGY CONSERVATION 2014
 5TH EDITION
 FBC RE = FLORIDA RESIDENTIAL CODE 2014 5TH EDITION
 NEC = NFPA 70 2011 EDITION, NATIONAL ELECTRICAL CODE
 FS = FLORIDA STATUTES
  
 ELECTRICAL REVIEW STATUS: DENIED, SEE COMMENTS BELOW.
  
 1. NOTE STATES THAT RECEPTACLES SHALL BE TAMPER
 RESISTANT PER NEC 406.11. THIS CODE SECTION DOES NOT
 APPLY TO TAMPER RESISTANT RECEPTACLES. PROVIDE
 CORRECTION. NEC 406.12; FBC RE4002.14
 2. SERVICE GROUNDING ELECTRODE TO BE AUGMENTED BY AN
 ADDITIONAL ELECTRODE 6 FEET AWAY OR PROVIDE EVIDENCE OF
 RESISTANCE TO GROUND OF 25 OHMS OR LESS. PROVIDE
 INTERSYSTEM BONDING TERMINATION POINT AT SERVICE (SHOW
 ON RISER DIAGRAM). NEC 250.6, 250.94; FBC RE3609.3
 3. PROVIDE ACCURATE LOAD CALCULATION INCLUDING ALL
 LOADS. NEC 220; FBC RE3602.3
 4. PROVIDE COMPLIANCE: "A MINIMUM OF 75 PERCENT OF THE
 LAMPS IN PERMANENTLY INSTALLED LIGHTING FIXTURES SHALL
 BE HIGH-EFFICACY LAMPS OR A MINIMUM OF 75 PERCENT OF
 THE PERMANENTLY INSTALLED LIGHTING FIXTURES SHALL
 CONTAIN ONLY HIGH EFFICACY LAMPS". A NOTE WILL SUFFICE.
 FBC EC R404.1
 5. A GFCI PROTECTED OUTLET ON A 20 AMP CIRCUIT IS
 REQUIRED WITHIN 3 FEET OF EACH BASIN. PROVIDE
 CORRECTION FOR BATH 2. NEC 210.11(C)(3), 210.52(D); FBC
 RE 3703.4, 3901.6
 6. PROVIDE CARBON MONOXIDE ALARMS WITHIN 10 FEET OF
 EACH ROOM USED FOR SLEEPING PURPOSES. FBC R315.1
 7. PROVIDE GFCI PROTECTION FOR ALL OUTLETS IN GARAGE,
 INCLUDING THE GARAGE DOOR OPENER. NEC 210.8; FBC
 RE3902.2
 8. PROVIDE SPEC SHEET FOR TANKLESS WATER HEATER. THE
 PANEL SCHEDULE SHOWS A LOAD OF 8000 WATTS, WHICH IS A
 LOAD OF APPROXIMATELY 33.33 AMPS. HOWEVER, THE BREAKER
 IS FOR THIS IS SHOWN AS AN 80 AMP BREAKER. NEED
 CLARIFICATION OF SIZE REQUIRED. NEC 110.3
  
 END OF COMMENTS.
  
 PLEASE NOTE: SUBMITTAL OF ADDITIONAL AND/OR REVISED
 MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS. WHEN
 RESUBMITTING, IT IS HELPFUL TO PROVIDE A RESPONSE
 LETTER ADDRESSING EACH ITEM ALONG WITH THE CITY
 RESUBMITTAL FORM. ADDITIONALLY, INSERT CORRECTED PAGES
 INTO THE ORIGINAL SUBMITTAL AND REMOVE OR VOID THE
 PREVIOUSLY REVIEWED SHEETS.
  
 SINCERELY,
  
 JOHN PEARSON
 ELECTRICAL PLANS EXAMINER
 561-805-6746
 [email protected]
  
Review Stop I INCOMING/PROCESSING
Rev No 3 Status N Date 2018-03-20 Cont ID  
Sent By jgomez Date 2018-03-20 Time 10:56 Rev Time 0.00
Received By jgomez Date 2018-03-20 Time 07:48 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2018-03-13 Cont ID  
Sent By jgomez Date 2018-03-13 Time 10:30 Rev Time 0.00
Received By jgomez Date 2018-02-14 Time 14:08 Sent To I
Notes
2018-02-15 14:11:16R11
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date   Cont ID  
Sent By   Date 2018-01-04 Time   Rev Time 0.00
Received By lmarchan Date 2017-12-06 Time 13:06 Sent To  
Notes
2017-12-07 13:06:33R10
Review Stop IMPACT COUNTY IMPACT FEES
Rev No 3 Status P Date 2018-03-20 Cont ID  
Sent By jgomez Date 2018-03-20 Time 10:53 Rev Time 0.00
Received By jgomez Date 2018-03-20 Time 10:53 Sent To  
Notes
2018-03-20 10:55:50$9,766.49 PAID MU-2018-004572.
Review Stop IMPACT COUNTY IMPACT FEES
Rev No 2 Status F Date 2018-03-12 Cont ID  
Sent By jgomez Date 2018-03-12 Time 17:23 Rev Time 0.00
Received By jgomez Date 2018-03-12 Time 17:23 Sent To  
Notes
2018-03-12 17:25:181- NEED COUNTY IMPACT FEE COPY OF PAID RECEIPT FOR CITY
 RECORDS. COUNTY IMPACT FEE ORDINANCE OF THE UNIFIED
 LAND DEVELOPMENT CODE.
  
Review Stop IMPACT COUNTY IMPACT FEES
Rev No 1 Status F Date 2018-01-03 Cont ID  
Sent By jgomez Date 2018-01-03 Time 14:42 Rev Time 0.00
Received By jgomez Date 2018-01-03 Time 14:42 Sent To  
Notes
2018-01-03 14:42:381- AFTER PLANS ARE REVISED, BRING THEM TO PALM BEACH
 COUNTY (2300 N. JOG RD.) FOR IMPACT FEE ASSESSMENT.
 BRING BACK COUNTY STAMPED PLANS AND COPY OF PAID
 RECEIPT IF FEES ARE DUE. COUNTY IMPACT FEE ORDINANCE OF
 THE UNIFIED LAND DEVELOPMENT CODE.
  
Review Stop M MECHANICAL (A/C)
Rev No 2 Status P Date 2018-03-13 Cont ID  
Sent By jgomez Date 2018-03-13 Time 10:30 Rev Time 0.00
Received By jgomez Date 2018-03-13 Time 10:19 Sent To  
Notes
***NONE***
Review Stop M MECHANICAL (A/C)
Rev No 1 Status P Date 2018-01-02 Cont ID  
Sent By hmoser Date 2018-01-02 Time 09:43 Rev Time 0.00
Received By hmoser Date 2018-01-02 Time 09:08 Sent To  
Notes
***NONE***
Review Stop P PLUMBING
Rev No 2 Status P Date 2018-03-13 Cont ID  
Sent By jgomez Date 2018-03-13 Time 09:59 Rev Time 0.00
Received By jgomez Date 2018-03-13 Time 09:59 Sent To  
Notes
***NONE***
Review Stop P PLUMBING
Rev No 1 Status P Date 2017-12-29 Cont ID  
Sent By tklarge Date 2017-12-29 Time 12:11 Rev Time 0.00
Received By tklarge Date 2017-12-29 Time 12:04 Sent To  
Notes
***NONE***
Review Stop R ROOF PLAN REVIEW
Rev No 2 Status P Date 2018-03-13 Cont ID  
Sent By jgomez Date 2018-03-13 Time 10:29 Rev Time 0.00
Received By jgomez Date 2018-03-13 Time 10:28 Sent To  
Notes
2018-03-13 10:29:52SHINGLES NOA 12-1127.03.
Review Stop R ROOF PLAN REVIEW
Rev No 1 Status F Date 2018-01-03 Cont ID  
Sent By jgomez Date 2018-01-03 Time 18:03 Rev Time 0.00
Received By jgomez Date 2018-01-03 Time 18:03 Sent To  
Notes
2018-01-03 18:04:511- PROVIDE PRODUCT APPROVAL (2 COPIES) AS REQUIRED BY
 FAC 61G20-3.001 FOR:
 A)ROOF SHINGLES AS SHOWN ON PLANS.
  
 2- DESIGNER OF RECORD TO REVIEW AND APPROVE IN WRITING
 (NOT SIGNING AND SEALING) ALL PRODUCT APPROVALS AS
 REQUIRED BY SEC. 107.3.4.1 CITY AMENDMENTS.
  
Review Stop Z ZONING
Rev No 3 Status P Date 2018-03-19 Cont ID  
Sent By ajones Date 2018-03-19 Time 15:30 Rev Time 0.00
Received By ajones Date 2018-03-19 Time 15:30 Sent To I
Notes
2018-03-19 15:33:513/19/18- PASSED WITH THE PROVISO THAT A SEPARATE PERMIT
 IS REQUIRED FOR: FENCE/WALL, IRRIGATION, LANDSCAPE AND
 DRIVEWAY
  
 ANGELLA VANN
 561-822-1441
 [email protected]
Review Stop Z ZONING
Rev No 2 Status F Date 2018-02-28 Cont ID  
Sent By llouie Date 2018-02-28 Time   Rev Time 0.00
Received By llouie Date 2018-02-28 Time   Sent To  
Notes
2018-02-28 09:07:20** FAILED **
  
 PLEASE ADDRESS THE FOLLOWING COMMENTS. RESPOND TO THE
 COMMENTS IN WRITING AND/OR ON THE PLANS WHERE
 APPLICABLE:
  
 1.) A SITE PLAN SHOWING ALL PROPOSED STRUCTURES (I.E.
 RESIDENCE, DRIVEWAY, STEPS, PORCHES, A/C UNIT PAD,
 ETC.) AND SETBACK DISTANCES FROM THE PROPERTY LINE IS
 REQUIRED. ALL SETBACK DISTANCES SHALL BE CONSISTENT
 WITH THE SETBACK REQUIREMENTS OF THE ZONING AND LAND
 DEVELOPMENT REGULATIONS (ZLDRS) AND THE DIMENSIONS
 PROVIDED IN THE SURVEY. [12/19/17 REPEAT COMMENT]
  
 2.) A MINIMUM OF 1,000 SQ. FT. OR 75 PERCENT OF THE
 REQUIRED FRONT YARD (THE AREA WITHIN THE FIRST 25 FT.
 OF THE FRONT PROPERTY LINE ON WINDSOR AVE.) SHALL BE
 LANDSCAPED WITH LIVING PLANT MATERIAL (I.E. GRASS,
 GROUND COVER, SHRUBS, HEDGES, VINES OR TREES). PLEASE
 SHOW CALCULATIONS IN THE REQUESTED SITE PLAN TO
 DEMONSTRATE COMPLIANCE. [ZLDR S.94-482(A)] [12/19/17
 REPEAT COMMENT]
  
 3.) THERE SEEMS TO BE AN A/C COMPRESSOR LOCATED ON THE
 NORTH SIDE OF THE BUILDING. PLEASE PROVIDE SETBACK
 DIMENSIONS FOR THE PROPOSED CONCRETE PAD TO THE
 PROPERTY LINE(S). PLEASE NOTE THAT PURSUANT TO ZLDR
 S.94-305(A)(4), THE PAD CANNOT PROJECT MORE THAN 4 FT.
 INTO A REQUIRED SETBACK.
  
 4.) PROVIDE DIMENSIONS FOR THE PROPOSED DRIVEWAY IN THE
 REQUESTED SITE PLAN. PLEASE NOTE THAT THE DRIVEWAY
 CANNOT EXCEED 20 FT. IN WIDTH. [ZLDR S.94-312(1)]
  
 5.) ROOF EAVES SHALL NOT PROJECT MORE THAN 3 FT. INTO
 ANY SETBACK. PLEASE PROVIDE DIMENSIONS IN THE
 ARCHITECTURAL PLANS TO DEMONSTRATE COMPLIANCE. [ZLDR
 S.94-305(A)(2)]
  
  
 NOTES:
  
 * SEPARATE PERMITS AND REVIEWS REQUIRED FOR:
 LANDSCAPING, IRRIGATION AND DRIVEWAY FOR THE NEW
 CONSTRUCTION PRIOR TO THE ISSUANCE OF A CERTIFICATE OF
 OCCUPANCY (C.O.)
  
 * REVISION MAY RESULT IN ADDITIONAL COMMENTS.
  
 * CONTACT LINDA LOUIE @ (561) 822-1458 IF THERE ARE
 QUESTIONS.
  
 * ZONE: SF7
  
  
Review Stop Z ZONING
Rev No 1 Status F Date 2017-12-19 Cont ID  
Sent By LL Date 2017-12-19 Time 09:04 Rev Time 0.00
Received By llouie Date 2017-12-19 Time 08:26 Sent To  
Notes
2017-12-19 09:09:58** FAILED **
  
 PLEASE ADDRESS THE FOLLOWING COMMENTS. RESPOND TO THE
 COMMENTS IN WRITING AND/OR ON THE PLANS WHERE
 APPLICABLE (INSUFFICIENT INFORMATION TO CONDUCT A FULL
 ZONING REVIEW):
  
 1.) PROVIDE A SIGNED AND SEALED SURVEY OF THE PROPERTY.
  
 2.) A SITE PLAN SHOWING ALL PROPOSED STRUCTURES (I.E.
 RESIDENCE, DRIVEWAY, STEPS, PORCHES, A/C UNIT PAD,
 ETC.) AND SETBACK DISTANCES FROM THE PROPERTY LINE IS
 REQUIRED. ALL SETBACK DISTANCES SHALL BE CONSISTENT
 WITH THE SETBACK REQUIREMENTS OF THE ZONING AND LAND
 DEVELOPMENT REGULATIONS (ZLDRS).
  
 3.) A MINIMUM OF 1,000 SQ. FT. OR 75 PERCENT OF THE
 REQUIRED FRONT YARD (THE AREA WITHIN THE FIRST 25 FT.
 OF THE FRONT PROPERTY LINE ON WINDSOR AVE.) SHALL BE
 LANDSCAPED WITH LIVING PLANT MATERIAL (I.E. GRASS,
 GROUND COVER, SHRUBS, HEDGES, VINES OR TREES). PLEASE
 SHOW CALCULATIONS IN THE REQUESTED SITE PLAN TO
 DEMONSTRATE COMPLIANCE. [ZLDR S.94-482(A)]
  
  
 NOTES:
  
 * A SEPARATE LANDSCAPE PERMIT WILL BE REQUIRED FOR THE
 NEW CONSTRUCTION PRIOR TO THE ISSUANCE OF THE
 CERTIFICATE OF OCCUPANCY (C.O.).
  
 * REVISION MAY RESULT IN ADDITIONAL COMMENTS.
  
 * CONTACT LINDA LOUIE @ (561) 822-1458 IF THERE ARE
 QUESTIONS.
  
 * ZONE: SF7
  


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved