Plan Review Details - Permit 16090110
Plan Review Stops For Permit 16090110
Review Stop G GAS REVIEW
Rev No 3 Status P Date 2016-09-13 Cont ID  
Sent By tklarge Date 2016-09-13 Time 14:14 Rev Time 0.00
Received By tklarge Date 2016-09-13 Time 14:14 Sent To  
Notes
***NONE***
Review Stop G GAS REVIEW
Rev No 2 Status F Date 2016-09-13 Cont ID  
Sent By tklarge Date 2016-09-13 Time 05:52 Rev Time 0.00
Received By tklarge Date 2016-09-13 Time 05:36 Sent To  
Notes
2016-09-13 05:41:431) INDICATE ON THE BOTH SETS OF PLANS IF THE GAS METER
 THAT IS SHOWN IS AN ADDITIONAL NEW METER OR THE
 EXISTING METER. IF THESE LANTERNS ARE BEING SUPPLIED BY
 THE EXISTING METER, THEN A NEW GAS RISER SHALL BE
 SUBMITTED SHOWING THE ENTIRE BTU LOAD AND ALL OF THE
 EXISTING PIPE SIZES. THE ADDITIONAL LOAD OF 154,000
 BTU'S MAY REQUIRE SOME OF THE EXISTING PIPING TO BE
 INCREASED IN SIZE TO ACCOMMODATE THE ENTIRE LOAD ON THE
 SYSTEM. 2014 FGC SEC.401.4. I HAVE INCLUDED COPIES OF
 THE PREVIOUSLY PERMITTED GAS PIPING SYSTEM FOR YOUR
 PURVIEW.
 2) THE MAXIMUM BTU LOAD ON 1/2 INCH PE PIPE AT 90 FEET
 AND LESS THAN 2 PSI PER TABLE 402.4 (21) IS 61,000
 BTU'S. THE PLAN SHOWS 4 LANTERNS ON A 1/2 INCH PE LINE
 AND A TOTAL OF 88,000 BTU'S. INCREASE THE PIPE SIZE AS
 NEEDED.
 3) SIZE THE LINE CONNECTING TO THE CONSUMER'S SIDE OF
 THE GAS METER. WPB AMEND. TO FBC SEC.107.2.1.
 4) THE ORIGINAL GAS PLAN SHOWS 2 PSI AT THE GAS METER &
 RISER FOR THE LATERNS SHOWS 0.5 PSI. CLARIFY.
 5) SHOW THE DISTANCE FROM THE GAS METER TO THE MOST
 REMOTE LINE PRESSURE REGULATOR. FGC SEC.402.4.3.
 I SUGGEST CONTACTING ME TO MAKE AN APPOINTMENT TO
 REVIEW THESE COMMENTS AND MAKE THE CORRECTIONS SO THIS
 PERMIT CAN BE ISSUED.
  
 TIM LARGE
 CHIEF PLUMBING INSPECTOR
 PLUMBING PLAN REVIEW
 561-805-6692
 [email protected]
  
Review Stop G GAS REVIEW
Rev No 1 Status F Date 2016-09-08 Cont ID  
Sent By tklarge Date 2016-09-08 Time 04:05 Rev Time 0.00
Received By tklarge Date 2016-09-08 Time 03:16 Sent To  
Notes
2016-09-08 03:45:061) INDICATE ON THE BOTH SETS OF PLANS IF THE GAS METER
 THAT IS SHOWN IS AN ADDITIONAL NEW METER OR THE
 EXISTING METER. IF THESE LANTERNS ARE BEING SUPPLIED BY
 THE EXISTING METER, THEN A NEW GAS RISER SHALL BE
 SUBMITTED SHOWING THE ENTIRE BTU LOAD AND ALL OF THE
 EXISTING PIPE SIZES. THE ADDITIONAL LOAD OF 154,000
 BTU'S MAY REQUIRE SOME OF THE EXISTING PIPING TO BE
 INCREASED IN SIZE TO ACCOMMODATE THE ENTIRE LOAD ON THE
 SYSTEM. 2014 FGC SEC.401.4. I HAVE INCLUDED COPIES OF
 THE PREVIOUSLY PERMITTED GAS PIPING SYSTEM FOR YOUR
 PURVIEW.
 2) THE MAXIMUM BTU LOAD ON 1/2 INCH PE PIPE AT 90 FEET
 AND LESS THAN 2 PSI PER TABLE 402.4 (21) IS 61,000
 BTU'S. THE PLAN SHOWS 4 LANTERNS ON A 1/2 INCH PE LINE
 AND A TOTAL OF 88,000 BTU'S. INCREASE THE PIPE SIZE AS
 NEEDED.
 3) SIZE THE LINE CONNECTING TO THE CONSUMER'S SIDE OF
 THE GAS METER. INDICATE THE TYPE OF PIPE. WPB AMEND. TO
 FBC SEC.107.2.1.
 4) INDICATE THE TYPE OF PIPE AND PIPE SIZE FOR THE STUB
 UPS FOR THE LANTERNS.
 5) SUBMIT MANUFACTURER'S SPECIFICATION SHEETS FOR THE
 LANTERNS. THE LANTERNS SHALL BE LISTED AND LABELED IN
 ACCORDANCE WITH 2014 FGC SEC. 301.3.
  
 TIM LARGE
 CHIEF PLUMBING INSPECTOR
 PLUMBING PLAN REVIEW
 561-805-6692
 [email protected]
  
Review Stop I INCOMING/PROCESSING
Rev No 3 Status N Date 2016-09-13 Cont ID  
Sent By tklarge Date 2016-09-13 Time 14:15 Rev Time 0.00
Received By tklarge Date 2016-09-13 Time 14:15 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2016-09-13 Cont ID  
Sent By tklarge Date 2016-09-13 Time 05:52 Rev Time 0.00
Received By tklarge Date 2016-09-12 Time 13:22 Sent To  
Notes
2016-09-12 13:22:30RESUB ROUTED TO TKLARGE
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date 2016-09-08 Cont ID  
Sent By tklarge Date 2016-09-08 Time 04:05 Rev Time 0.00
Received By tklarge Date 2016-09-06 Time 13:37 Sent To  
Notes
2016-09-06 13:37:16PLUMB -$5000


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved