| 2015-03-25 18:11:37 | ****CORRECTIONS**** |
| | |
| | SAMANTHA HILL |
| | BUILDING PLANS EXAMINER |
| | [email protected] |
| | 561-805-6724 |
| | |
| | 1. THE SCOPE OF THIS WORK IS NOT WITHIN THE SCOPE OF A |
| | RESIDENTIAL CONTRACTOR, FS 489. |
| | |
| | 2. THE ROOFING PRODUCT APPROVAL IS INCOMPLETE. THE |
| | FOLLOWING PAGES ARE REQUIRED: |
| | |
| | THE FIRST PAGES WHICH INCLUDE ALL OF THE ROOFING |
| | COMPONENTS IN THE ASSEMBLIES |
| | THE ASSEMBLY SELECTED |
| | THE LAST PAGE OF THE NOA WHICH GIVE THE PRODUCT |
| | LIMITATIONS |
| | |
| | 3. SEE GENERAL LIMITATION #7 ON THE LAST PAGE OF THE |
| | ROOF NOA; ENHANCED FASTENING CALCULATIONS ARE TO BE |
| | DONE BY AN ARCHITECT OR ENGINEER. PLEASE BE ADVISED |
| | THAT THIS MANUFACTURER (CERTAINTEED) HAS A FLORIDA |
| | STATE PRODUCT APPROVAL WHICH HAS ENHANCED FASTENING |
| | INCLUDED IN THE PRODUCT APPROVAL, SO ENGINEERING IS NOT |
| | REQUIRED FOR THAT PRODUCT. TO MY KNOWLEDGE, ALL MIAMI |
| | DADE NOAS REQUIRE ENGINEERING FOR ENHANCED FASTENING. |
| | |
| | IF A FLORIDA STATE PRODUCT APPROVAL IS SUBMITTED, THE |
| | FOLLOWING PAGES ARE REQUIRED: |
| | |
| | THE FLORIDA STATE PRODUCT APPROVAL COVER SHEET WHICH |
| | SHOWS THE NUMBER AND STATUS |
| | THE FIRST PAGES OF THE EVALUATION REPORT / INSTALLATION |
| | INSTRUCTIONS WHICH INCLUDES INFORMATION PERTINENT TO |
| | ALL OF THE ASSEMBLIES |
| | ALL PAGES FOR THE ASSEMBLY SELECTED |
| | ANY OTHER PAGES WHICH APPLY TO ALL ASSEMBLIES |
| | |
| | IF UNSURE AS TO WHICH PAGES SHOULD BE SUBMITTED, |
| | PROVIDE ALL AND THE ONES WHICH ARE NOT NECESSARY WILL |
| | BE REMOVED FOR YOU. |
| | |
| | 4. PROVIDE A COPY OF THE CONTRACT FOR THIS JOB, FBC |
| | 109. |
| | |
| | |
| | |
| | |
| | |
