| 2009-06-12 11:18:00 | ****CORRECTIONS**** |
| | |
| | ROBERT MCDOUGAL, BUILDING PLANS EXAMINER |
| | 561-805-6714 [email protected] |
| | |
| | 2007 FLORIDA BUILDING CODE & |
| | CITY OF WEST PALM BEACH AMENDMENTS TO THE 2007FBC |
| | |
| | ROOFING PERMIT; ONLY CHECKED ITEMS APPLY |
| | |
| | ____ 1.) EFFECTIVE OCTOBER 1, 2007, SECONDARY WATER |
| | BARRIER REQUIRED FS 553.844(5)(A). PROVIDE INFORMATION |
| | (PRODUCT APPROVAL OR SPECIFICATIONS) TO SHOW HOW YOU |
| | WILL COMPLY WITH THIS REQUIREMENT. INFORMATION IS |
| | AVAILABLE AT WWW.BOAF.NET, HURRICANE MITIGATION. |
| | |
| | ____ 2.) CONTRACTOR IS TO PROVIDE THE FOLLOWING |
| | INFORMATION ON THE APPLICATION: MEAN ROOF HEIGHT, ROOF |
| | PITCH, ROOF DECK TYPE, AREA OF EACH ROOF TYPE. |
| | |
| | ____ 3.) FLORIDA STATE OR LOCAL PRODUCT APPROVAL |
| | REQUIRED IN ADDITION TO THE EVALUATION REPORT |
| | SUBMITTED, FAC RULE 9B-72. WWW.FLORIDABUILDING.ORG |
| | |
| | __X___ 4.) FOR THE FLAT ROOF, INDICATE WHICH ONE OF THE |
| | APPROVED ASSEMBLIES LISTED IN THE PRODUCT APPROVAL WILL |
| | BE INSTALLED. ALSO SPECIFY WHICH FASTENER AND DESIGN |
| | PRESSURE WILL BE USED. |
| | |
| | _____ 5.) FOR THE FLAT ROOF, SPECIFY THE ENHANCED |
| | FASTENING FOR CORNER AND PERIMETER ZONES. THIS IS TO BE |
| | SUBMITTED ON COMPANY LETTERHEAD, TWO SETS (NOT WRITTEN |
| | ON THE RE-SUB SHEET). |
| | |
| | ____ 6.) ON THE TILE PRODUCT APPROVAL, INDICATE WHICH |
| | METHOD OF ATTACHMENT YOU ARE USING. IF YOU SELECT FOAM |
| | ADHESIVE, PRODUCT APPROVALS REQUIRED. FAC RULE 9B-72 |
| | |
| | __X_ 7.) SEE PRODUCT LIMITATION #7. SIGNED AND SEALED |
| | CALCULATIONS IN ACCORDANCE WITH RAS 117 PREPARED BY AN |
| | ARCHITECT, ENGINEER, OR REGISTERED ROOF CONSULTANT ARE |
| | REQUIRED FOR ENHANCED FASTENING. |
| | |
| | |
| | PROVISO: MECHANICAL EQUIPMENT TO COMPLY WITH FBCEB 611, |
| | FBC 1509.7. |
| | |
| | |
| | |
