| 2008-11-01 11:16:09 | |
| | |
| | DENIED |
| | |
| | 1) PLANS AND SPECIFICATIONS DESIGN PARAMETERS SHALL |
| | COMPLY WITH THE 2004 FLORIDA BLDG CODE WITH 2006 & 2007 |
| | AMENDMENTS PER 106.1.1 FBC* |
| | |
| | 2) IN AN EXISTING BUILDING WHERE ALTERATIONS ARE BEING |
| | MADE A DESIGN PROFESSIONAL MUST ELECT THE LEVEL OF |
| | ALTERATION PER 301.5 OF EXISTING BUILDING CODE AND |
| | STATE ALONG WITH THE TYPE OF CONSTRUCTION AND OCCUPANCY |
| | ON THE DRAWINGS |
| | |
| | 3) PROVIDE WIND DESIGN DATA ON DRAWINGS PER 1603.1.4 |
| | FBC |
| | |
| | 4) EXTERIOR WALL ARE SUBJECT TO WIND LOADS, PROVIDE THE |
| | DESIGN PRESSURES FOR THE NEW OPENING |
| | |
| | 5) PROVIDE BUILDING PLAN VIEW TO DETERMINE LOCATION OF |
| | OPENINGS AND THEIR RESPECTIVE WIND ZONE |
| | |
| | 6) BUILDING ELEVATION TO INCLUDE MEAN ROOF HEIGHT |
| | |
| | 7) PROVIDE INFORMATION ON HURRICANE STRAPS OR |
| | CONNECTORS THAT WILL BE USED |
| | |
| | 8) THE PERMIT APPLICATION SHALL INCLUDE TWO COPIES OF |
| | EACH PRODUCT APPROVAL THAT IS RELEVANT PER 9B-72. |
| | |
| | 9) THOSE PRODUCTS WHICH ARE REGULATED BY DCA RULE 9B-72 |
| | (PRODUCT APPROVALS) SHALL BE REVIEWED AND APPROVED IN |
| | WRITING BY THE DESIGNER OF RECORD PRIOR TO SUBMITTAL |
| | FOR JURISDICTIONAL APPROVAL PER 106.3.3 FBC* |
| | |
| | 10) NO PRODUCT APPROVALS WERE SUBMITTED FOR THE |
| | CONNECTORS AND STRAPS. IN LUE OF PRODUCT APPROVALS |
| | STRAPS/CONNECTORS MAY BE LISTED IN A SCHEDULE ON THE |
| | DRAWINGS COMPLETE WITH THE STATEWIDE PRODUCT APPROVAL |
| | NUMBERS OR SUBMIT SIMPSON TIE?S COMPLETE FLORIDA INDEX |
| | WITH CONNECTORS TO BE USED HIGHLIGHTED |
| | |
| | BLDG PLAN REVIEW |
| | ADRIAN MORSE |
| | 561-805-6716 |
| | |
| | |
