Plan Review Details - Permit 06030498
Plan Review Stops For Permit 06030498
Review Stop B BUILDING (STRUCTURAL)
Rev No 4 Status P Date 2007-03-07 Cont ID  
Sent By lmartine Date 2007-03-07 Time 17:57 Rev Time 0.00
Received By lmartine Date 2007-03-07 Time 17:24 Sent To  
Notes
2007-03-07 17:56:30 
  
 PROVIDE RECORDED NOTICE OF COMMENCEMENT
Review Stop B BUILDING (STRUCTURAL)
Rev No 3 Status F Date 2006-10-25 Cont ID  
Sent By alange Date 2006-10-25 Time 13:41 Rev Time 0.00
Received By alange Date 2006-10-25 Time 13:41 Sent To  
Notes
2006-10-25 13:51:34DENIED
  
 THIRD REVIEW:
  
 NONE OF THE FOLLOWING COMMENTS HAVE BEEN ADDRESSED.
 INSUFFICIENT INFORMATION SUBMITTED FOR A COMPLETE PLAN
 REVIEW.APPLICATION IS FOR $10,000 OF INTERIOR WORK
 YET PLANS ARE FOR INTERIOR AND EXTERIOR WORK.REVISED
 SCOPE OF WORK AND PERMIT VALUATION PRIOR TO
 RESUBMITTING.IF EXTERIOR IS DONE SUBMIT TO HISTORIC
 FOR REVIEW.
  
 1. 713.13 F.S.A NOTICE OF COMMENCEMENT
 SHALL BE RECORDED AT PALM BEACH COUNTY
 COURTHOUSE AND A COPY SUBMITTED TO THIS
 OFFICE BEFORE A PERMIT CAN BE ISSUED.
 BLANK FORMS ARE AVAILABLE FROM THIS
 OFFICE.
 NOTE: THE NOTICE OF COMMENCEMENT MUST BE RE-RECORDED IF
 THE DESCRIBED IMPROVEMENT
 OR CONSTRUCTION IS NOT COMMENCED WITHIN
 90 DAYS OF RECORDING.
  
 2.PERMIT VALUATION SHOULD REFLECT ALL
 WORK AND MATERIALS THE THE PERMITTED
 PROJECT.
  
 3.A DESIGN PROFESSIONAL OR AN OWNER
 MUST ELECT ONE OR A COMBINATION OF
 LEVELS OF ALTERATION PURSUANT TO
 SECTIONS 303, 304 AND 305 OF THIS CODE.
 SHOW HOW PLANS WILL COMPLY WITH THE
 SECTION(S) SELECTED.2004 FBC EXISTING
 BUILDING 301.5
  
 5.BEDROOM 1 WINDOW DOES NOT MEET
 REQUIREMENTS FOR EMERGENCY ESCAPE RESCUE
 OPENING SIZES.R-310
  
 6.AS PER PHONE CONVERSATION; REMOVE
 ALL EXTERIOR ITEMS FROM DRAWINGS,
 PARKING, STAIRS, ROOFING, ROOF REPAIRS,
 DOORS, WINDOWS.SHOW ON PLANS ONLY THE
 ITEMS YOU WISH TO HAVE PERMITTED AT THIS
 TIME.
  
 NEW COMMENTS:SINCE SCOPE OF WORK HAS
 CHANGED SEE THE FOLLOWING COMMENTS:
 A. PRODUCT APPROVALS REQUIRED FOR DOORS.
 B. STATE PRODUCT APPROVALS REQUIRED FOR
 ROOFING AND SHUTTERS.
 C. WINDOW PRODUCT APPROVALS ARE FOR
 IMPACT GLASS, YET SHUTTERS ARE STILL
 USED?
 D. PRODUCT APPROVALS SUBMITTED WITH
 PERMIT APPLICATION AFTER OCTOBER 1, 2003
 ARE REQUIRED TO COMPLY WITH THE FLORIDA
 PRODUCT APPROVAL SYSTEM. FOR INFORMATION
 PLEASE SEE THE STATE WEBSITE AT
 WWW.FLORIDABUILDING.ORG. PRODUCTS WITH
 STATEWIDE APPROVAL ARE REQUIRED TO BE
 SUBMITTED WITH A COVER SHEET THAT LISTS
 THE PRODUCT IDENTITY NUMBER FROM THE
 STATE. IF THE PRODUCT DOES NOT HAVE
 STATEWIDE APPROVAL, SUBMIT AN APPLICA-
 TION FOR LOCAL PRODUCT APPROVAL OR SITE
 SPECIFIC FORM PER RULE 9B-72. SEE
 ATTACHMENT. WWW.FLORIDABUILDING.ORG
  
  
 WHEN RESUBMITTING PLANS PLEASE INDICATE
 THE REVISION & REMOVE & REPLACE ANY
 PAGES AS NECESSARY. SUBMIT ONE COPY OF
 OLD PAGES FOR REFERENCE. A TRANSMITTAL
 LETTER LISTING THE ORIGINAL REVIEW
 COMMENT NUMBER, WITH A DESCRIPTION OF
 THE REVISION MADE, IDENTIFYING THE SHEET
 OR SPECIFICATION PAGE WHERE THE CHANGES
 CAN BE FOUND WILL HELP TO EXPEDITE YOUR
 PERMIT. THANK YOU FOR YOUR ANTICIPATED COOPERATION.
  
 ART LANGE
 CONSTRUCTION SERVICES DEPARTMENT
 BUILDING PLANS EXAMINER
 561-805-6672
Review Stop B BUILDING (STRUCTURAL)
Rev No 2 Status F Date 2006-08-15 Cont ID  
Sent By alange Date 2006-08-15 Time 09:08 Rev Time 1.50
Received By alange Date 2006-08-15 Time 09:08 Sent To  
Notes
2006-08-15 00:00:00DENIED
  
  
 1. 713.13 F.S.A NOTICE OF COMMENCEMENT
 SHALL BE RECORDED AT PALM BEACH COUNTY
 COURTHOUSE AND A COPY SUBMITTED TO THIS
 OFFICE BEFORE A PERMIT CAN BE ISSUED.
 BLANK FORMS ARE AVAILABLE FROM THIS
 OFFICE.
 NOTE: THE NOTICE OF COMMENCEMENT MUST BE RE-RECORDED IF
 THE DESCRIBED IMPROVEMENT
 OR CONSTRUCTION IS NOT COMMENCED WITHIN
 90 DAYS OF RECORDING.
  
 2.PERMIT VALUATION SHOULD REFLECT ALL
 WORK AND MATERIALS THE THE PERMITTED
 PROJECT.
  
 3.A DESIGN PROFESSIONAL OR AN OWNER
 MUST ELECT ONE OR A COMBINATION OF
 LEVELS OF ALTERATION PURSUANT TO
 SECTIONS 303, 304 AND 305 OF THIS CODE.
 SHOW HOW PLANS WILL COMPLY WITH THE
 SECTION(S) SELECTED.2004 FBC EXISTING
 BUILDING 301.5
  
 5.BEDROOM 1 WINDOW DOES NOT MEET
 REQUIREMENTS FOR EMERGENCY ESCAPE RESCUE
 OPENING SIZES.R-310
  
 6.AS PER PHONE CONVERSATION; REMOVE
 ALL EXTERIOR ITEMS FROM DRAWINGS,
 PARKING, STAIRS, ROOFING, ROOF REPAIRS,
 DOORS, WINDOWS.SHOW ON PLANS ONLY THE
 ITEMS YOU WISH TO HAVE PERMITTED AT THIS
 TIME.
  
 NEW COMMENTS:SINCE SCOPE OF WORK HAS
 CHANGED SEE THE FOLLOWING COMMENTS:
 A. PRODUCT APPROVALS REQUIRED FOR DOORS.
 B. STATE PRODUCT APPROVALS REQUIRED FOR
 ROOFING AND SHUTTERS.
 C. WINDOW PRODUCT APPROVALS ARE FOR
 IMPACT GLASS, YET SHUTTERS ARE STILL
 USED?
 D. PRODUCT APPROVALS SUBMITTED WITH
 PERMIT APPLICATION AFTER OCTOBER 1, 2003
 ARE REQUIRED TO COMPLY WITH THE FLORIDA
 PRODUCT APPROVAL SYSTEM. FOR INFORMATION
 PLEASE SEE THE STATE WEBSITE AT
 WWW.FLORIDABUILDING.ORG. PRODUCTS WITH
 STATEWIDE APPROVAL ARE REQUIRED TO BE
 SUBMITTED WITH A COVER SHEET THAT LISTS
 THE PRODUCT IDENTITY NUMBER FROM THE
 STATE. IF THE PRODUCT DOES NOT HAVE
 STATEWIDE APPROVAL, SUBMIT AN APPLICA-
 TION FOR LOCAL PRODUCT APPROVAL OR SITE
 SPECIFIC FORM PER RULE 9B-72. SEE
 ATTACHMENT. WWW.FLORIDABUILDING.ORG
  
  
 WHEN RESUBMITTING PLANS PLEASE INDICATE
 THE REVISION & REMOVE & REPLACE ANY
 PAGES AS NECESSARY. SUBMIT ONE COPY OF
 OLD PAGES FOR REFERENCE. A TRANSMITTAL
 LETTER LISTING THE ORIGINAL REVIEW
 COMMENT NUMBER, WITH A DESCRIPTION OF
 THE REVISION MADE, IDENTIFYING THE SHEET
 OR SPECIFICATION PAGE WHERE THE CHANGES
 CAN BE FOUND WILL HELP TO EXPEDITE YOUR
 PERMIT. THANK YOU FOR YOUR ANTICIPATED COOPERATION.
  
 ART LANGE
 CONSTRUCTION SERVICES DEPARTMENT
 BUILDING PLANS EXAMINER
 561-805-6672
Review Stop B BUILDING (STRUCTURAL)
Rev No 1 Status F Date 2006-05-23 Cont ID  
Sent By alange Date 2006-05-23 Time 10:24 Rev Time 1.25
Received By alange Date 2006-05-23 Time 10:24 Sent To  
Notes
2006-05-23 00:00:00DENIED
  
  
 1. 713.13 F.S.A NOTICE OF COMMENCEMENT
 SHALL BE RECORDED AT PALM BEACH COUNTY
 COURTHOUSE AND A COPY SUBMITTED TO THIS
 OFFICE BEFORE A PERMIT CAN BE ISSUED.
 BLANK FORMS ARE AVAILABLE FROM THIS
 OFFICE.
 NOTE: THE NOTICE OF COMMENCEMENT MUST BE
 RE-RECORDED IF THE DESCRIBED IMPROVEMENT
 OR CONSTRUCTION IS NOT COMMENCED WITHIN
 90 DAYS OF RECORDING.
  
 2.PERMIT VALUATION SHOULD REFLECT ALL
 WORK AND MATERIALS THE THE PERMITTED
 PROJECT.
  
 3.A DESIGN PROFESSIONAL OR AN OWNER
 MUST ELECT ONE OR A COMBINATION OF
 LEVELS OF ALTERATION PURSUANT TO
 SECTIONS 303, 304 AND 305 OF THIS CODE.
 SHOW HOW PLANS WILL COMPLY WITH THE
 SECTION(S) SELECTED.2004 FBC EXISTING
 BUILDING 301.5
  
 4.SAFTEY GLAZING REQUIRED AT TUB
 LOCATION.R-308.4
  
 5.BEDROOM 1 WINDOW DOES NOT MEET
 REQUIREMENTS FOR EMERGENCY ESCAPE RESCUE
 OPENING SIZES.R-310
  
 6.AS PER PHONE CONVERSATION; REMOVE
 ALL EXTERIOR ITEMS FROM DRAWINGS,
 PARKING, STAIRS, ROOFING, ROOF REPAIRS,
 DOORS, WINDOWS.SHOW ON PLANS ONLY THE
 ITEMS YOU WISH TO HAVE PERMITTED AT THIS
 TIME.
  
  
 WHEN RESUBMITTING PLANS PLEASE INDICATE
 THE REVISION & REMOVE & REPLACE ANY
 PAGES AS NECESSARY. SUBMIT ONE COPY OF
 OLD PAGES FOR REFERENCE. A TRANSMITTAL
 LETTER LISTING THE ORIGINAL REVIEW
 COMMENT NUMBER, WITH A DESCRIPTION OF
 THE REVISION MADE, IDENTIFYING THE SHEET
 OR SPECIFICATION PAGE WHERE THE CHANGES
 CAN BE FOUND WILL HELP TO EXPEDITE YOUR
 PERMIT. THANK YOU FOR YOUR ANTICIPATED
 COOPERATION.
  
 ART LANGE
 CONSTRUCTION SERVICES DEPARTMENT
 BUILDING PLANS EXAMINER
 561-805-6672
  
Review Stop E ELECTRICAL
Rev No 6 Status P Date 2007-03-28 Cont ID  
Sent By btrobaug Date 2007-03-28 Time 09:50 Rev Time 0.50
Received By btrobaug Date 2007-03-28 Time 09:30 Sent To P
Notes
***NONE***
Review Stop E ELECTRICAL
Rev No 5 Status F Date 2007-02-01 Cont ID  
Sent By btrobaug Date 2007-02-01 Time 13:31 Rev Time 1.50
Received By btrobaug Date 2007-02-01 Time 07:44 Sent To P
Notes
2007-02-01 11:51:38 
 NONCOMPLIANT
  
 PLEASE MAKE THE FOLLOWING CORRECTIONS FOR CODE
 COMPLIANCE AND RESUBMIT FOR REVIEW.
  
 1} LOCATE THE SERVICE DISCONNECTS ON THE PLAN. THE
 LOCATION OF THE METER DOES NOT APPEAR TO LEAVE ROOM
 (PHYSICALLY) FOR THE DISCONNECTS SHOWN (AND REQUIRED)
 ON THE RISER, AT THE SAME LOCATION. ALSO NOTE THE
 SERVICE DROP CONDUCTORS CANNOT BE WITHIN 3' OF THE 2ND
 FLOOR WINDOW. SEE SHEET A-4.
  
 2} PLEASE INDICATE THE MAIN BREAKER RATING ON THE
 DISCONNECTS. 215.5.
  
 3} PLACING THE CONDENSING UNITS AND THEIR DISCONNECTS
 UNDER THE STEPS VIOLATES 110.26 CLEARANCE REQUIREMENTS,
 SEE NOTE #15, E-1.
  
 4} PER ZONING CODE THE RANGE CIRCUIT MUST BE REMOVED
 FROM THE CALCULATIONS AND THE PANEL SCHEDULE FOR THE
 SECOND FLOOR.
  
 5} PLEASE EXPLAIN WHY THE "INSTA HOT" WATER HEATERS ARE
 CALCULATED AT 2VA IN THE CALCS..
  
 6} PANEL SCHEDULE "B"DOES NOT SHOW CIRCUITING FOR THE
 BAR OR MEDIA, BUT DOES SHOW CIRCUITS FOR THE DINING
 ROOM AND SMALL APPLIANCES, THAT ARE NOT ON THAT FLOOR.
 PLEASE CORRELATE THE SCHEDULE WITH THE FLOOR PLAN.
  
 IF THERE ARE ANY QUESTIONS PLEASE CALL.
  
 BILL TROBAUGH
 ELECTRICAL PLAN REVIEW.
 CITY OF WEST PALM BEACH
 561/805-6718
 [email protected]
Review Stop E ELECTRICAL
Rev No 4 Status F Date 2006-12-22 Cont ID  
Sent By btrobaug Date 2006-12-22 Time 13:58 Rev Time 1.25
Received By btrobaug Date 2006-12-22 Time 12:51 Sent To P
Notes
2006-12-22 13:58:31 
 NONCOMPLIANT
  
 PLEASE MAKE THE FOLLOWING CORRECTIONS FOR CODE
 COMPLIANCE AND RESUBMIT FOR REVIEW.
  
 COMMENTS, SHEET E-1.
  
 1} THE GEC IS TOO SMALL FOR THE SERVICE CONDUCTORS. SEE
 250.66, MINIMUM #2.
  
 2} THE #1 CU FEEDERS FROM THE 200 AMP METER/MAINS IS
 TOO SMALL PER 310.15(B)(6), 2/0 MINIMUM.
  
 3} THE EQUIPMENT GROUND RAN WITH THE FEEDERS IS IN
 VIOLATION OF 250.122, NEEDS TO BE #6 MIN.
  
 4} THE BATH CIRCUITS IN ALL PANELS MUST BE ON THEIR OWN
 CIRCUIT PER 210.11(C)(3).
  
 5} NOTE #14 ON BOTH SHEETS SHOULD ALSO INDICATE THE
 DETECTOR CIRCUIT MUST BE ARC FAULT PER 210.12.
  
 6} THE #2FEEDERS ON E-2 ARE TOO SMALL FOR A 150 AMP
 OCP PER 310.15.BOTH SERVICES.
  
 7} THE TITLE BLOCK INDICATING "ARCHITECTURAL SERVICES"
 MUST CONTAIN A CERTIFICATE OF AUTHORIZATION PER 481
 FS..
  
 BILL TROBAUGH
 ELECTRICAL PLAN REVIEW.
 CITY OF WEST PALM BEACH
 561/805-6718
 [email protected]
Review Stop E ELECTRICAL
Rev No 3 Status F Date 2006-10-12 Cont ID  
Sent By btrobaug Date 2006-10-12 Time 17:34 Rev Time 3.00
Received By btrobaug Date 2006-10-12 Time 14:07 Sent To P
Notes
2006-10-12 15:08:54NONCOMPLIANT
  
 PLEASE MAKE THE FOLLOWINGS CORRECTIONS FOR CODE
 COMPLIANCE AND RESUBMIT FOR REVIEW.
  
 1} THE RISER DIAGRAM MARKED " T TYPICAL " NEEDS TO BE
 SPECIFIC. THERE IS TWO METERS SHOWN AND TWO 150 AMP
 PANELS MARKED "A" AND "B". WHERE IS THE RISER FOR "C"
 AND "D"? WHAT ARE THE DISCONNECTS SHOWN TO THE SIDE OF
 THE METERS?
  
 2} THE LOAD CALCULATIONS DO NOT CORRELATE WITH THE
 EQUIPMENT IN THE PANEL SCHEDULE. SEE ARTICLE 220 IN THE
 2002 NEC. USE SECTIONS I AND II OR 220.30, 31, OR 32.
 INDICATE WHICH TABLE OR ARTICLE IS USED ON THE PLAN.
  
 3}PANEL MDP IS ON THE PLAN WITH A SCHEDULE, BUT NOT
 ON THE RISER.
  
 4} THE GROUNDING ELECTRODE CONDUCTOR IS INCORRECT FOR
 THE SERVICE THAT IS SHOWN, SEE 250.66 AND SIZE
 ACCORDINGLY.
  
 5} } PER 110.9 AND 110.10: OBTAIN THE AVAILABLE FAULT
 CURRENT AT THE UTILITY AND CALCULATE THE SAME AT THE
 EQUIPMENT. INDICATE THE AIC RATING FOR THE EQUIPMENT IS
 EQUAL TO OR GREATER THAN THE AVAILABLE FAULT.
  
 6} THE PLAN SHOWS "SERVICE PANELS " OUTSIDE, AND
 INSIDE. CORRELATE SAME ON RISER.
  
 THE FOLLOWING COMMENTS REFERENCE THE DRAWING MARKED
 "GROUND FLOOR PLAN" SHEET E-1.
  
 7} SMOKE DETECTORS MUST BE INSTALLED TO COMPLY WITH
 R313.1 RESIDENTIAL FLORIDA BUILDING CODE.
  
 8} BATH CIRCUIT REQUIRED TO HAVE A 20 AMP RECEPTACLE
 PER 210.11(C) (3), PUT IN THE SCHEDULE.
  
 9} THE WATER HEATER, CONDENSER, RANGE AND AIR HANDLER
 ARE SHOWN ON SINGLE POLE BREAKERS. VERIFY THE LOAD AS
 WELL AS VOLTAGES.
  
 10} TWO SMALL APPLIANCE CIRCUITS ARE REQUIRED PER
 210.11(C)(1) MUST APPEAR ON CALCS AND SCHEDULES.
  
 11} KITCHEN RECEPTACLE SPACING MUST COMPLY WITH
 210.52(A), 210.52(C), AND 210.8(A)(6) GFI.
  
 12} THE BEDROOMS,AND OFFICE MUST COMPLY WITH THE
 REQUIRED RECEPTACLE SPACING PER 210.52(A).
  
 13} THE DETECTOR IN THE KITCHEN MUST BE HEAT AND NOT
 SMOKE PER NFPA-72.
  
 THE FOLLOWING COMMENTS REFERENCE THE DRAWING MARKED
 "FIRST FLOOR PLAN" SHEET E-1.
  
 14} INDICATE THE DIFFERENCE BETWEEN "GROUND " AND
 "FIRST" FLOOR.
  
 15} SMOKE DETECTORS MUST BE INSTALLED TO COMPLY WITH
 R313.1 RESIDENTIAL FLORIDA BUILDING CODE.
  
 16} BATH CIRCUIT REQUIRED TO HAVE A 20 AMP RECEPTACLE
 PER 210.11(C) (3), PUT IN THE SCHEDULE.
  
 17} THE WATER HEATER, CONDENSER, RANGE AND AIR HANDLER
 ARE SHOWN ON SINGLE POLE BREAKERS. VERIFY THE LOAD AS
 WELL AS VOLTAGES.
  
 18} TWO SMALL APPLIANCE CIRCUITS ARE REQUIRED PER
 210.11(C)(1) MUST APPEAR ON CALCS AND SCHEDULES.
  
 19}KITCHEN RECEPTACLE SPACING MUST COMPLY WITH
 210.52(A), 210.52(C), AND 210.8(A)(6) GFI.
  
 20} INDICATE COMPLIANCE WITH 210.12, ARC FAULT
 PROTECTION.
  
 21} THE WATER HEATER, CONDENSER, RANGE AND AIR HANDLER
 ARE SHOWN ON SINGLE POLE BREAKERS. VERIFY THE LOAD AS
 WELL AS VOLTAGES.
  
 22}PENINSULAR COUNTER SPACES. AT LEAST ONE RECEPTACLE
 OUTLET SHALL BE INSTALLED AT EACH PENINSULAR COUNTER
 SPACE WITH A LONG DIMENSION OF 600 MM (24 IN.) OR
 GREATER AND A SHORT DIMENSION OF 300 MM (12 IN.) OR
 GREATER. A PENINSULAR COUNTERTOP IS MEASURED FROM THE
 CONNECTING EDGE. 210.52(C)(3).
  
 THE FOLLOWING COMMENTS REFERENCE THE DRAWING MARKED
 "708-1/2 (A)" SHEET E-1.
  
 23} KITCHEN RECEPTACLE SPACING MUST COMPLY WITH
 210.52(A), 210.52(C), AND 210.8(A)(6) GFI.
  
 24} PROVIDE A PANEL SCHEDULE AND RISER DIAGRAM.
  
 26} THE BEDROOMS,AND LOUNGE MUST COMPLY WITH THE
 REQUIRED RECEPTACLE SPACING PER 210.52(A)
  
 27} SMOKE DETECTORS MUST BE INSTALLED TO COMPLY WITH
 R313.1 RESIDENTIAL FLORIDA BUILDING CODE.
  
 28} 210.52( E) OUTDOOR OUTLETS. FOR A ONE-FAMILY
 DWELLING AND EACH UNIT OF A TWO-FAMILY DWELLING THAT IS
 AT GRADE LEVEL, AT LEAST ONE RECEPTACLE OUTLET
 ACCESSIBLE AT GRADE LEVEL AND NOT MORE THAN 2.0 M (61/2
 FT) ABOVE GRADE SHALL BE INSTALLED AT THE FRONT AND
 BACK OF THE DWELLING. SEE 210.8(A)(3).
  
 THE FOLLOWING COMMENTS REFERENCE THE DRAWING MARKED
 "708-1/2 (B)" SHEET E-1.
  
 29} THE BEDROOM AND LOUNGE MUST COMPLY WITH THE
 REQUIRED RECEPTACLE SPACING PER 210.52(A)
  
 30} SMOKE DETECTORS MUST BE INSTALLED TO COMPLY WITH
 R313.1 RESIDENTIAL FLORIDA BUILDING CODE.
  
 31}KITCHEN RECEPTACLE SPACING MUST COMPLY WITH
 210.52(A), 210.52(C), AND 210.8(A)(6) GFI.
  
 ONE SET OF PLANS IS BEING RETAINED TO BE SENT TO THE
 STATE BOARD OF ARCHITECTURE FOR VIOLATIONS OF 481.223
 FLORIDA STATUTES.
  
 BILL TROBAUGH
 ELECTRICAL PLAN REVIEW.
 CITY OF WEST PALM BEACH
 561/805-6718
 [email protected]
 FAX/:561/805-6676
Review Stop E ELECTRICAL
Rev No 2 Status F Date 2006-08-10 Cont ID  
Sent By btrobaug Date 2006-08-10 Time 13:33 Rev Time 0.50
Received By btrobaug Date 2006-08-10 Time 12:45 Sent To P
Notes
2006-08-10 00:00:00 
  
 NONCOMPLIANT
  
 IT IS UNCLEAR WHAT THE SCOPE OF WORK IS
 AS WAS COMMENTED ON BEFORE. SHEET E-1
 INDICATES A NEW 150 AMP PANEL, BUT THE
 FEED CONDUCTORS ARE TOO SMALL FOR 150
 AMPS PER 310.15(B)(6). THE EQUIPMENT
 GROUND IS TOO SMALL, 250.122.
  
 THERE IS NO INDICATION OF THE LOCATION
 OF THE REFERENCED SERVICES. SHOW THE
 PHYSICAL LOCATION OF ALL SERVICE
 EQUIPMENT ON THE PLAN. 215.5.
  
 THE TITLE BLOCK OF THE ARCHITECTURAL
 FIRM MUST CONTAIN THE CERTIFICATE OF
 AUTHORIZATION NUMBER REQUIRED BY THE
 STATE PER 61G1-16.004(2).
  
 PLEASE RESUBMIT WITH THE ORIGINAL
 APPLICATION AS THE ONE SUBMITTED WITH
 THIS RESUB IS A PHOTOCOPY AND DOES NOT
 CONTAIN ORIGINAL SIGNATURES.
  
 IF THERE ARE ANY QUESTIONS PLEASE CALL.
  
 BILL TROBAUGH
 ELECTRICAL PLAN REVIEW
 561/805-6718
 [email protected]
Review Stop E ELECTRICAL
Rev No 1 Status F Date 2006-05-18 Cont ID  
Sent By btrobaug Date 2006-05-18 Time 09:37 Rev Time 2.00
Received By btrobaug Date 2006-05-18 Time 06:30 Sent To M
Notes
2006-05-18 00:00:00 
 DENIED
  
 PLEASE MAKE THE FOLLOWING CORRECTIONS
 FOR CODE COMPLIANCE AND RESUBMIT FOR
 REVIEW.
  
 1} THE SCOPE OF WORK ON THE APPLICATION
 IS INTERIOR WALL RENOVATION. THE
 ELECTRICAL SHEETS DO NOT INDICATE
 EXISTING FROM NEW WORK. THEREFOR IT
 WOULD APPEAR THE UNITS ARE TO BE
 REWIRED. PLEASE INDICATE SAME ON THE
 APPLICATION AND INCREASE VALUE TO
 REFLECT SAME. IF SOME IS EXISTING AND
 SOME IS NEW PLEASE INDICATE SAME AT THE
 DEVICES.
  
 2} THERE IS NO RECORD IN CITY HALL'S
 FILES THAT WOULD INDICATE ELECTRICAL
 UPGRADES. PLEASE PROVIDE LOAD
 CALCULATIONS, PANEL SCHEDULES, AND THE
 LOCATION OF ALL SERVICE EQUIPMENT,
 INCLUDING METERS, DISCONNECT AND PANELS
 PER 215.5. SEE 2002 NEC., 2004
 RESIDENTIAL BUILDING CODE, AND NFPA-72.
  
 3} PLEASE SEE RECEPTALE SPACING AND
 LOCATION REQUIREMENTS, NEC 2002, IF
 REWIRING. SEE EXISTING BUILDING CHAPTERS
 FOR INFORMATIION.
  
 COMPLY WITH THESE DOCUMENTS AND RESUBMIT
 FOR REVIEW.
  
 "ENGINEERS SHALL LEGIBLY INDICATE THEIR
 NAME, ADDRESS, AND LICENSE NUMBER
 ON EACH SHEET." 61G15-23.002 FAC.
  
 BILL TROBAUGH
 ELECTRICAL PLAN REVIEW
 561/805-6718
 [email protected]
 FAX/:561/659-8026
  
  
  
  
  
Review Stop I INCOMING/PROCESSING
Rev No 10 Status N Date 2007-03-22 Cont ID  
Sent By adarroug Date 2007-03-22 Time 09:39 Rev Time 0.00
Received By adarroug Date 2007-03-22 Time 09:39 Sent To E
Notes
2007-03-22 09:40:19TO "BTROBAUG" DESK/RESUB
Review Stop I INCOMING/PROCESSING
Rev No 9 Status N Date 2007-01-30 Cont ID  
Sent By adarroug Date 2007-01-30 Time 09:07 Rev Time 0.00
Received By adarroug Date 2007-01-30 Time 09:07 Sent To E
Notes
2007-01-30 09:07:24TO "BTROBAUG" DESK/RESUB
Review Stop I INCOMING/PROCESSING
Rev No 8 Status N Date 2007-01-25 Cont ID  
Sent By adarroug Date 2007-01-25 Time 09:45 Rev Time 0.00
Received By adarroug Date 2007-01-25 Time 09:45 Sent To Z
Notes
2007-01-25 09:46:11TO "Z" BOX/RESUB
Review Stop I INCOMING/PROCESSING
Rev No 7 Status N Date 2007-01-08 Cont ID  
Sent By adarroug Date 2007-01-08 Time 12:04 Rev Time 0.00
Received By adarroug Date 2007-01-08 Time 12:04 Sent To B
Notes
2007-01-08 12:04:46TO "LMARTINEZ" DESK/RESUB
Review Stop I INCOMING/PROCESSING
Rev No 6 Status N Date 2006-12-17 Cont ID  
Sent By adarroug Date 2006-12-17 Time 14:35 Rev Time 0.00
Received By adarroug Date 2006-12-17 Time 14:35 Sent To E
Notes
2006-12-17 14:36:01TO "BTROBAUB" DESK/RESUB
Review Stop I INCOMING/PROCESSING
Rev No 5 Status N Date 2006-10-10 Cont ID  
Sent By adarroug Date 2006-10-10 Time 19:52 Rev Time 0.00
Received By adarroug Date 2006-10-10 Time 19:52 Sent To E
Notes
2006-10-10 19:52:59TO "BTROBAUG" DESK/RESUB
Review Stop I INCOMING/PROCESSING
Rev No 4 Status N Date 2006-10-05 Cont ID  
Sent By adarroug Date 2006-10-05 Time 14:00 Rev Time 0.00
Received By adarroug Date 2006-10-05 Time 14:00 Sent To Z
Notes
2006-10-05 00:00:00TO "Z" BOX/RESUB
Review Stop I INCOMING/PROCESSING
Rev No 3 Status N Date 2006-08-03 Cont ID  
Sent By adarroug Date 2006-08-03 Time 08:26 Rev Time 0.00
Received By adarroug Date 2006-08-03 Time 08:26 Sent To E
Notes
2006-08-03 00:00:00TO "BTROBAUG" DESK/RESUB
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2006-05-11 Cont ID  
Sent By adarroug Date 2006-05-11 Time 11:44 Rev Time 0.00
Received By adarroug Date 2006-05-11 Time 11:44 Sent To E
Notes
2006-05-11 00:00:00TO "E" BOX
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date 2006-05-23 Cont ID  
Sent By alange Date 2006-05-23 Time 10:32 Rev Time 0.00
Received By alange Date 2006-03-14 Time 08:50 Sent To  
Notes
2006-03-14 00:00:00TO "Z" BOX
Review Stop M MECHANICAL (A/C)
Rev No 4 Status P Date 2007-04-06 Cont ID  
Sent By tgordon Date 2007-04-06 Time 16:01 Rev Time 0.40
Received By tgordon Date 2007-04-06 Time 16:01 Sent To E
Notes
***NONE***
Review Stop M MECHANICAL (A/C)
Rev No 3 Status F Date 2007-04-03 Cont ID  
Sent By tgordon Date 2007-04-03 Time 15:33 Rev Time 0.45
Received By tgordon Date 2007-04-03 Time 15:33 Sent To  
Notes
2007-04-03 15:48:23*** DENIED ***
  
 1) SEE MECHANICAL PLANS, THE ENGINEER'S NAME, ADDRESS,
 AND LICENSE NUMBER MUST APPEAR IN THE TITLE BLOCK, SEE
 FAC 61G15-23.002.
  
 2) SEE MECHANICAL PLANS THE JOB ADDRESS MUST APPEAR IN
 THE TITLE BLOCK, SEE 2004 FBC, CITY WPB AMEND.
 106.1.3.
  
 3) ENGINEER LUIS A LOPEZ LICENSE EXPIRED 2-28-07,
 PLEASE CORRECT.
  
 MECHANICAL PLAN REVIEW BY;
 TOM GORDON (561) 805-6729.
Review Stop M MECHANICAL (A/C)
Rev No 2 Status F Date 2007-02-07 Cont ID  
Sent By tgordon Date 2007-02-07 Time 11:07 Rev Time 0.45
Received By tgordon Date 2007-02-07 Time 11:07 Sent To B
Notes
2007-02-07 11:43:12*** DENIED ***
 SEE MECHANICAL PLAN PAGE M-1.
  
 1) UNIT 708 1ST. FL. BEDROOM 1, RETURN AIR TRANSFER
 DUCT IS LISTED AS A RETURN AIR TRANSFER GRILL, PLEASE
 CORRECT.
  
 2) SAME UNIT PLEASE SHOW SIZE OF RETURN AIR TRANSFER
 DUCT (FLEX).
  
 3) UNIT 708 2ND. FL., ALL RETURN AIR TRANSFER DUCTS ARE
 LISTED AS RETURN AIR TRANSFER GRILLS, PLEASE CORRECT.
  
 4) SAME UNIT, PLEASE SHOW SIZE OF RETURN AIR TRANSFER
 DUCTS (FLEX).
  
 5) UNIT 708 -1/2 A,ALL RETURN AIR TRANSFER DUCTS ARE
 LISTED AS RETURN AIR TRANSFER GRILLS, PLEASE CORRECT.
  
 6) SAME UNIT, 7" RETURN AIR TRANSFER DUCTS (FLEX) ARE
 UNDER SIZED FOR BEDROOMS, BALANCED RETURN AIR MAY BE
 ACHIEVED BY.
 (A)TRANSFER DUCTS MAY ACHIEVE THIS BY INCREASING THE
 RETURN TRANSFER ONE AND ONE HALF TIMES THE CROSS
 SECTIONAL AREA
 (SQUARE INCHES) OF THE SUPPLY DUCT ENTERING THE ROOM OR
 SPACE IT'S SERVING AND THE DOOR HAVING AT LEAST AN
 UNRESTRICTED 1 INCHUNDERCUT TO ACHIEVE PROPER RETURN
 AIR BALANCE. PER 2004 FBC/R M1602.4 .
  
 7) UNIT 708 - 1/2 B, 12X6 RETURN AIR TRANSFER GRILL TO
 BEDROOM 1 IS UNDER SIZED, BALANCED RETURN AIR MAY BE
 ACHIEVED BY.
 (B)TRANSFER GRILLES SHALL USE 50 SQUARE INCHES (OF
 GRILLE AREA) TO 100 CFM (OF SUPPLY AIR) FOR SIZING
 THROUGH-THE-WALL TRANSFER GRILLES AND
 USING AN UNRESTRICTED 1-INCH UNDERCUTTING OF DOORS TO
 ACHIEVE PROPER RETURN AIR BALANCE. PER 2004 FBC/R
 M1602.4 .
  
 8) PLEASE ALSO SHOW SENSIBLE BTU'S IN A/C EQUIPMENT
 LISTING ON MECH. PLANS.
  
 9) PLEASE SUBMITMANUAL J CALCULATIONS, PER 2004 FBC
 13-607.1.ABC.1 .
  
 MECHANICAL PLAN REVIEW BY;
 TOM GORDON (561) 805-6729.
Review Stop M MECHANICAL (A/C)
Rev No 1 Status N Date 2006-05-18 Cont ID  
Sent By tgordon Date 2006-05-18 Time 14:03 Rev Time 0.20
Received By tgordon Date 2006-05-18 Time 14:03 Sent To P
Notes
2006-05-18 00:00:00NO MECHANICAL PLANS SUBMITTED, AND NO
 MECHANICAL PERMIT NUMBER APPLIED FOR AT
 THIS TIME.
Review Stop P PLUMBING
Rev No 6 Status P Date 2007-04-03 Cont ID  
Sent By mperson Date 2007-04-03 Time 13:22 Rev Time 0.33
Received By mperson Date 2007-04-03 Time 13:22 Sent To M
Notes
***NONE***
Review Stop P PLUMBING
Rev No 5 Status F Date 2007-02-06 Cont ID  
Sent By mperson Date 2007-02-06 Time 14:47 Rev Time 2.00
Received By mperson Date 2007-02-06 Time 14:47 Sent To M
Notes
2007-02-06 16:19:15DENIED FIFTH TIME
 REFERENCE: FBC-2004 PLUMBING
  
 THE FOLLOWING ITEMS ARE STILL REQUIRED TO BE CORRECTED
 FOR PLUMBING PLAN REVIEW TO MEET CODE COMPLIANCE:
  
 1. SHEET P-1 AND P-2 SANITARY ISOMETRICS AND PLUMBING
 PLAN WASHING MACHINE BRANCH DRAINS ARE STILL SIZED
 WRONG ON ALL UNITS ( 708 FIRST AND SECOND FLOOR, 708
 1/2A AND 708 1/2B) PER FBC-2004 PLUMBING, SECTION 406.3
 THEY NEED TO BE THREE INCH (3") NOT TWO INCH (2").
 PLEASE CORRECT AND RESUBMIT.
  
 2. SEE ATTACHED NOTICE FS 553.80 (2) (B) REGAURDING
 FOUR TIMES THE FEE.
  
 THE FOLLWING ARE NEW ITEMS THAT NEED TO BE CORRECTED
 FOR PLUMBING PLAN REVIEW TO MEET CODE COMPLIANCE:
  
 3. SHEET P-1 GENERAL NOTES #16 DELETE "APPROVED AIR
 CHAMBERS" AND ADD IN ITS PLACE THE FOLLOWING " WATER
 HAMMER ARRESTORS TO BE INSTALLED PER FBC-2004 PLUMBING,
 SECTION 604.9."
  
 4. SHEET P-1 NOTE ON TUB AND SHOWER VALVES: PLEASE ADD
 "TUB AND SHOWER VALVES TO BE INSTALLED PER FBC-2004
 PLUMBING, SECTION 424.3.
  
 5. SHEET P-2 UNIT 708 1/2A WATER ISOMETRIC: A} PER
 FBC-2004 PLUMBING, SECTION 606.1 (2) FULL-OPEN VALVE
 REQUIRED ON THE WATER DISTRIBUTION SUPPLY PIPE AT THE
 ENTRANCE INTO THE BUILDING. B} HOT AND COLD WATER ARE
 CROSSED ON THE WASHER, KITCHEN, AND LAV, PER FBC-2004
 PLUMBING SECTION 607.4 FLOW OF HOT WATER TO FIXTURES
 SHALL BE INSTALLED AND ADJUSTED SO THAT THE FLOW OF HOT
 WATER FROM THE FITTING CORRESPONDS TO THE LEFT-SIDE OF
 THE FIXTURE FITTING. C} WATER SERVICE NEEDS TO SUPPLY
 THE WATER DISTRIBUTION PIPING FIRST THEN BRANCH TO THE
 WATER HEATER AS THE CORRECTED DRAWING INDICATES, NOT
 DIRECTLY SUPPLY THE WATER HEATER AS SHOWN. PLEASE
 CORRECT AND RESUBMIT. D} PLEASE CLARIFY THE THIRD WATER
 CONNECTION TO THE WASHER. IS IT NEEDED, IF NOT PLEASE
 DELETE.
  
 6. SHEET P-2 708 1/2B WATER ISOMETRIC: A} PER FBC-2004
 PLUMBING, SECTION 606.1 (2) FULL-OPEN VALVE REQUIRED ON
 THE WATER DISTRIBUTION SUPPLY PIPE AT THE ENTRANCE INTO
 THE BUILDING. B} HOT AND COLD WATER ARE CROSSED ON THE
 LAV AND WASHER, PER FBC-2004 PLUMBING SECTION 607.4
 FLOW OF HOT WATER TO FIXTURES SHALL BE INSTALLED AND
 ADJUSTED SO THAT THE FLOW OF HOT WATER FROM THE FITTING
 CORRESPONDS TO THE LEFT-SIDE OF THE FIXTURE FITTING. C}
 WATER SERVICE NEEDS TO SUPPLY THE WATER DISTRIBUTION
 PIPING FIRST THEN BRANCH TO THE WATER HEATER AS THE
 CORRECTED DRAWING INDICATES, NOT DIRECTLY SUPPLY THE
 WATER HEATER AS SHOWN. PLEASE CORRECT AND RESUBMIT. D}
 IS IT THE INTENT TO HAVE HOT WATER SUPPLIED TO THE HOSE
 BIBB AS INDICATED. IF NOT PLEASE CORRECT AND RESUBMIT.
 E} PLEASE CLARIFY THE THIRD WATER CONNECTION TO THE
 WASHER. IS IT NEEDED, IF NOT PLEASE DELETE.
  
 **********IMPORTANT INFORMATION
 IN ORDER TO EXPIDITE PLAN REVIEW: WHEN RESUBMITTING,
 PLEASE REPLACE ONLY SHEETS
 WHICH HAVE CHANGED AND PROVIDE ONE COPY
 OF ALL OLD/VOIDED SHEETS FOR REFERENCE
 ONLY. NOTE: ONLY ONE CORRECTED DRAWING
 IN RED INK FOR REFERENCE FOR
 RESUBMITTAL.
  
 END OF COMMENTS:
  
 REVIEW BY MIKE PERSON
 (561) 805-6730
 FAX (561) 805-6731
 E-MAIL [email protected]
 UNDER SUPERVISION OF K.STEVENS
 (561) 805-6721
  
Review Stop P PLUMBING
Rev No 4 Status F Date 2006-12-26 Cont ID  
Sent By mperson Date 2006-12-26 Time 15:12 Rev Time 0.33
Received By mperson Date 2006-12-26 Time 15:12 Sent To B
Notes
2006-12-26 15:14:35DENIED 4TH TIME
 REFERENCE: FBC-2004 PLUMBING
  
 THE FOLLOWING CORRECTIONS ARE REQUIRED FOR PLUMBING
 PLAN REVIEW TO MEET CODE COMPLIANCE:
  
 1. SHEET NO. SP-1 PLUMBING NOTES PLEASE CHANGE
 "PROVIDE A MINIMUM PITCH OF 1/8 INCH AT ALL HORIZONTAL
 BRANCHES AND SEWER LINES" TO READ "SLOPE OF HORIZONTAL
 DRAINAGE PIPE PER TABLE 704.1".
  
 2. SHEETS P-1 AND P-2 THE FOLLOWING IS REQUIRED FOR
 THE WASHING MACHINES PER FBC-2004 PLUMBING, SEC. 406.3.
 (A) 406.3 WASTE CONNECTIONS.THE TRAP AND
 FIXTURE DRAIN FOR AN AUTOMATIC CLOTHES
 WASHER SHALL BE A MINIMUM OF 2 INCHES
 (51MM) IN DIAMETER. THE AUTOMATIC
 CLOTHES WASHER FIXTURE DRAIN SHALL
 CONNECT TO A BRANCH DRAIN OR DRAINAGE
 STACK A MINIMUM OF 3 INCHES (76MM) IN
 DIAMETER.
  
 **IN ORDER TO EXPIDITE PLAN REVIEW: WHEN RESUBMITTING,
 PLEASE REPLACE ONLY SHEETS
 WHICH HAVE CHANGED AND PROVIDE ONE COPY
 OF ALL OLD/VOIDED SHEETS FOR REFERENCE
 ONLY. NOTE: ONLY ONE CORRECTED DRAWING
 IN RED INK FOR REFERENCE FOR
 RESUBMITTAL.
  
 END OF COMMENTS:
  
 REVIEW BY MIKE PERSON
 (561) 805-6730
 FAX (561) 805-6731
 E-MAIL [email protected]
 UNDER SUPERVISION OF K.STEVENS
 (561) 805-6721
Review Stop P PLUMBING
Rev No 3 Status F Date 2006-10-24 Cont ID  
Sent By mperson Date 2006-10-24 Time 14:58 Rev Time 0.33
Received By mperson Date 2006-10-24 Time 14:58 Sent To B
Notes
2006-10-24 15:31:55UNSAT
 REFERENCE: FBC-2004 PLUMBING AND FBC-2004 CHAPTER 1.
  
 THE FOLLOWING INFORMATION IS REQUIRED FOR PLUMBING PLAN
 REVIEW:
  
 1. PLEASE NOTE THAT THE RESUBMITTED PLANS ARE NOT A
 COMPLETE SET. PER FBC-2004 CHAPTER 1, SEC. 106.1
 MINIMUM OF TWO (2) COMPLETE SETS ARE REQUIRED.
  
 2. PLEASE SIZE THE POTABLE WATER ISOMETRIC PIPING ON
 SHEET M-1 FOR UNITS 708-1/2 AAND B.
  
 3. PLEASE INDICATE ON SHEET M-1 THE WATER HEATER RELEIF
 LINES AND POINT OF TERMINATION.
  
 END OF COMMENTS:
  
 REVIEW BY MIKE PERSON
 (561) 805-6730
 FAX (561) 805-6731
 E-MAIL [email protected]
 UNDER SUPERVISION OF K.STEVENS
 (561) 805-6721
  
Review Stop P PLUMBING
Rev No 2 Status F Date 2006-08-14 Cont ID  
Sent By mperson Date 2006-08-14 Time 10:49 Rev Time 0.55
Received By mperson Date 2006-08-14 Time 10:49 Sent To B
Notes
2006-08-14 00:00:00******DENIED 2ND TIME******
 REFERENCE: FBC-2004 PLUMBING
 FBC-2004 CHAPTER 1
 FLORIDA ADMINISTRATIVE CODE
  
 THE FOLLOWING INFORMATION IS STILL
 REQUIRED FOR PLUMBING PLAN REVIEW:
  
 1. PER THE NOTE ON SHEET M-1 THAT
 INDICATES ALL EXISTING CAST IRON PIPES
 TO BE REPLACED BY CODE APPROVED PVC
 PIPE, THE FOLLOWING IS REQUIRED FOR THE
 2 STORY APARTMENT BUILDING.
 (A) PER FBC-2004 PLUMBING, SECTION
 106.3.5.4 RESIDENTIAL (ONE AND TWO
 FAMILY) SUBMIT A PLUMBING SANITARY
 ISOMETRIC RISER DIAGRAM INDICATING ALL
 WASTE, VENTS, TRAPS WITH SIZES, AND
 CLEANOUT LOCATIONS.
 2. NOTE: THE BATHTUB INDICATED ON SHEET
 M-1, 708-1/2 A, IS NOT VENTED PER
 FBC-2004 PLUMBING, SECTION #901.2.1.
 PLEASE REFERENCE THE CORRECTED DRAWING
 ON SHEET M-1 IN RED INK FOR RESUBMITTAL.
 3. NOTE: THE SANITARY ISOMETRIC RISER
 DIAGRAMS INDICATED ON SHEET M-1 DO NOT
 REFLECT THE FLOOR PLAN, PLEASE REFERENCE
 THE CORRECTED DRAWINGS ON SHEET M-1 IN
 RED INK FOR RESUBMITTAL.
 4. NOTE: PER FBC-2004 PLUMBING, SEC
 406.3 THE FOLLOWING NEEDS TO BE
 CORRECTED ON THE WASHING MACHINE
 INDICATED ON SHEET M-1, 708-1/2 A AND B
 (A) 406.3 WASTE CONNECTIONS.THE TRAP AND
 FIXTURE DRAIN FOR AN AUTOMATIC CLOTHES
 WASHER SHALL BE A MINIMUM OF 2 INCHES
 (51MM) IN DIAMETER. THE AUTOMATIC
 CLOTHES WASHER FIXTURE DRAIN SHALL
 CONNECT TO A BRANCH DRAIN OR DRAINAGE
 STACK A MINIMUM OF 3 INCHES (76MM) IN
 DIAMETER. PLEASE REFERENCE THE CORRECTED
 DRAWING ON SHEET M-1 FOR RESUBMITTAL.
 5. PER THE FLORIDA ADMINISTRATIVE CODE
 ITEMS #2 AND #6 ARE STILL NOT INDICATED
 ON THE TITLE BLOCK PLEASE CORRECT FOR
 THE RESUBMITTAL.
 FAC-61G1-16.004 TITLE BLOCK:
 A TITLE BLOCK MUST APPEAR ON ALL
 ARCHITECTURAL OR INTERIOR DESIGN
 DRAWINGS AND SPECIFICATION
 IDENTIFICATION SHEETS. THE TITLE BLOCK
 MUST, AT A MINIMUM, CONTAIN THE
 FOLLOWING INFORMATION:
 (1) FIRM NAME, ADDRESS, AND TELEPHONE
 NUMBER.
 (2) FIRM LICENSE NUMBER.
 (3) NAME OR IDENTIFICATION OF PROJECT.
 (4) DATE PREPARED.
 (5) A SPACE FOR THE SIGNATURE AND DATED
 SEAL.
 (6) A SPACE FOR THE PRINTED NAME OF THE
 PERSON SEALING THE DOCUMENT.
 6. PLEASE SEE ATTACHED FLORIDA STATUTE
 533.80(2)(B) IN RESPECT WITH REPEAT
 COMMENTS FOR CODE COMPLIANCE.
  
 **IN ORDER TO EXPIDITE PLAN REVIEW: WHEN
 RESUBMITTING, PLEASE REPLACE ONLY SHEETS
 WHICH HAVE CHANGED AND PROVIDE ONE COPY
 OF ALL OLD/VOIDED SHEETS FOR REFERENCE
 ONLY. NOTE: ONLY ONE CORRECTED DRAWING
 IN RED INK FOR REFERENCE FOR
 RESUBMITTAL.
  
 END OF COMMENTS:
  
 REVIEW BY MIKE PERSON
 (561) 805-6730
 FAX (561) 805-6731
 E-MAIL [email protected]
 UNDER SUPERVISION OF K.STEVENS
 (561) 805-6721
  
  
  
  
Review Stop P PLUMBING
Rev No 1 Status F Date 2006-05-22 Cont ID  
Sent By mperson Date 2006-05-22 Time 11:22 Rev Time 1.00
Received By mperson Date 2006-05-22 Time 11:22 Sent To B
Notes
2006-05-22 00:00:00DENIED
 REFERENCE: FBC-2004 PLUMBING
 FBC-2004 CHAPTER 1
 FLORIDA ADMINISTRTIVE CODE
  
 THE FOLLOWING INFORMATION IS REQUIRED
 FOR PLUMBING PLAN REVIEW FOR A PLUMBING
 PERMIT:
 1. MORE INFORMATION REQUIRED. PLEASE
 INDICATE ON DRAWING EXISTING PLUMBING
 LAYOUT, AND INDICATE ON A SEPERATE
 DRAWING NEW PROPOSED PLUMBING LAYOUT. IF
 NEW PROPOSED PLUMBING LAYOUT IS
 DIFFERENT FROM EXISTING PLEASE FOLLOW
 WHAT IS REQUIRED IN #2. IF PLUMBING
 LAYOUT IS THE SAME WITH NO CHANGES,
 PLEASE INDICATE THIS ON THE DRAWING. IF
 PLUMBING LAYOUT IS THE SAME AND THE
 PLUMBING FIXTURES ARE TO BE CHANGED,
 PLEASE INDCATE ON DRAWING FIXTURE CHANGE
 OUT ONLY.
 2. 106.3.5.4 RESIDENTIAL (ONE AND TWO
 FAMILY) SUBMIT A PLUMBING SANITARY
 ISOMETRIC RISER DIAGRAM INDICATING ALL
 WASTE, VENTS, TRAPS WITH SIZES, AND
 CLEANOUT LOCATIONS.
 3. FAC-61G1-16.004 TITLE BLOCK:
 A TITLE BLOCK MUST APPEAR ON ALL
 ARCHITECTURAL OR INTERIOR DESIGN
 DRAWINGS AND SPECIFICATION
 IDENTIFICATION SHEETS. THE TITLE BLOCK
 MUST, AT A MINIMUM, CONTAIN THE
 FOLLOWING INFORMATION:
 (1) FIRM NAME, ADDRESS, AND TELEPHONE
 NUMBER.
 (2) FIRM LICENSE NUMBER.
 (3) NAME OR IDENTIFICATION OF PROJECT.
 (4) DATE PREPARED.
 (5) A SPACE FOR THE SIGNATURE AND DATED
 SEAL.
 (6) A SPACE FOR THE PRINTED NAME OF THE
 PERSON SEALING THE DOCUMENT.
 NOTE: ITEMS #2 AND #6 ARE NOT INDICATED
 ON TITLE BLOCK PLEASE CORRECT FOR
 RESUBMITTAL.
  
 END OF COMMENTS:
  
 REVIEW BY MIKE PERSON
 (561) 805-6730
 FAX (561) 805-6731
 E-MAIL [email protected]
 UNDER SUPERVISION OF K.STEVENS
 (561) 805-6721
  
  
Review Stop Z ZONING
Rev No 4 Status P Date 2007-01-26 Cont ID  
Sent By mflis Date 2007-01-26 Time 11:11 Rev Time 0.00
Received By mflis Date 2007-01-26 Time 11:11 Sent To  
Notes
2007-01-26 11:12:58ZONING REVIEW: PASSED
  
 - PERMIT APPROVED FOR THREE DWELLING UNITS ONLY: TWO
 STORY FRONT UNIT, AND TWO SEPARATE REAR UNITS
 - APPLICANT DISCUSSED RETAINING EXISTING EXTERIOR
 STAIRWELL. STAFF APPROVES, WITH INTERIOR STAIR
 REMAINING ON 2-STORY UNIT
  
 MATT FLIS 822-1445
Review Stop Z ZONING
Rev No 3 Status F Date 2007-01-08 Cont ID  
Sent By mflis Date 2007-01-08 Time 11:26 Rev Time 0.00
Received By mflis Date 2007-01-08 Time 11:26 Sent To  
Notes
2007-01-08 11:30:24ZONING REVIEW:
  
 DENIED
  
 - ONLY THREE DWELLING UNITS ARE PERMITTED ON THIS
 PROPERTY - ONE FRONT (MAIN STRUCTURE) AND TWO REAR
 COTTAGES
 - MAIN STRUCTURE MUST REMAIN AS ONE SINGLE FAMILY
 STRUCTURE; NO ADDITIONAL KITCHEN OR ELECTRICAL METER
 CAN BE INSTALLED
 - EXTERIOR STAIR SHALL NOT BE INSTALLED
  
 MATT FLIS 822-1445
Review Stop Z ZONING
Rev No 2 Status N Date 2006-10-06 Cont ID  
Sent By mflis Date 2006-10-06 Time 11:10 Rev Time 0.00
Received By mflis Date 2006-10-06 Time 11:10 Sent To  
Notes
2006-10-06 00:00:00THE SCOPE OF THIS PERMIT REMAINS
 INTERIOR WORK ONLY. NO EXTERIOR
 MODIFICATIONS REVIEWED OR APPROVED IN
 ASSOCIATION WITH THIS PERMIT. ANY
 EXTERIOR RENOVATIONS MUST BE REVIEWED BY
 URBAN DESIGN AND HISTORIC PRESERVATION
 DIVISIONS.
  
 -MJF
Review Stop Z ZONING
Rev No 1 Status P Date 2007-03-07 Cont ID  
Sent By mflis Date 2006-05-08 Time 16:33 Rev Time 0.00
Received By mflis Date 2006-05-08 Time 16:33 Sent To  
Notes
2006-05-08 00:00:00INTERIOR WORK ONLY. NO EXTERIOR WORK
 SUBMITTED WITH 06030498 REVIEWED OR
 APPROVED. MJF


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved