| Plan Review Stops For Permit 06010255 |
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
2 |
Status |
P |
Date |
2006-01-20 |
|
|
Cont ID |
|
| Sent By |
jgomez |
Date |
2006-01-19 |
Time |
18:23 |
Rev Time |
1.00 |
| Received By |
jgomez |
Date |
2006-01-19 |
Time |
18:20 |
Sent To |
|
|
| Notes |
| 2006-01-20 00:00:00 | CONTRACTOR BROUGHT SPECIFIC ASSEMBLY TO | | | BE INSTALLED. | | 2006-01-19 00:00:00 | 1-20-06 CALLED CONTRACTOR TO CLARIFY | | | WHICH FLAT ASSEMBLY WILL BE USED, SINCE | | | INFORMATION SUBMITTED IS INCOMPLETE. | | | WAITING FOR HIS RESPONSE TO ISSUE THE | | | PERMIT. |
|
|
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
1 |
Status |
F |
Date |
2006-01-09 |
|
|
Cont ID |
|
| Sent By |
jgomez |
Date |
2006-01-09 |
Time |
17:59 |
Rev Time |
0.75 |
| Received By |
jgomez |
Date |
2006-01-09 |
Time |
17:59 |
Sent To |
|
|
| Notes |
| 2006-01-09 00:00:00 | BUILDING REVIEW CHECKLIST: | | | 1- GENERAL LIMITATION #7 REQUIRES | | | CALCULATIONS FOR NAIL ENHANCING. | | | CALCULATIONS NEED TO BE DONE BY | | | ARCHITECT, ENGINEER OR REGISTERED ROOF | | | CONSULTANT. PROVIDE SUCH CALCULATIONS. | | | SEE LIMITATION #7 ON PRODUCT APPROVAL. | | | | | | 2- CLEARLY IDENTIFY HOW IS THE TILE | | | GOING TO BE ATTACHED. SPECIFY IF USING | | | ADHESIVE SET OR MORTAR SET. SEE TILE | | | PRODUCT APPROVAL FOR APPROVED ADHESIVE. | | | | | | 3- IDENTIFY SPECIFIC POLYSTICK | | | UNDERLAYMENT TO BE USEDTO VERIFY | | | COMPLIANCE TO THE LIMITATIONS SHOWN ON | | | SHEET 4 AND 5 OF DADE COUNTY NOA. | | | | | | JULIO GOMEZ | | | BUILDING PLANS EXAMINER | | | (561)805-6712 |
|
|
|
