| 2001-01-08 00:00:00 | APPROVED WITH PROVISO: |
| | 1-PROVIDE PRODUCT APPROVAL FOR: |
| | -BUTT GLAZING SYSTEM AT FAMILY AREA. |
| | -CUSTOM MADE KITCHEN WINDOW ASSEMBLY. |
| | -ENTRY DOORS W/ TRANSOM ABOVE ASSEMBLY. |
| | -FRENCH DOOR W/ TRANSOM ABOVE ASSEMBLY. |
| | (SEE COMMENTS ON SUBMITTAL). |
| | -SLIDING GLASS DOORS WITH TRANSOM ABOVE |
| | ASSEMBLY (SEE COMMENTS ON SUBMITTAL). |
| | -GARAGE DOORS PRODUCT APPROVALS THAT |
| | MEET THE DESIGN PRESSURES CALCULATED |
| | BY THE ARCHITECT. |
| | 2-COMPLETELY SPECIFY CEILING CONSTRUCT'N |
| | AT ENTRY AND REAR PORCHES. |
| | NOTE: INCLUDE FASTENER TYPES AND |
| | SPACING. SECTION 2504 SBC 1997. |
| | 3-STORM PANELS TO BE UNDER A SEPARATE |
| | PERMIT. (NO INFO. GIVEN AT THIS TIME). |
| | 4-TRUSS DRAWINGS: |
| | -PROVIDE 2 COMPLETE SETS OF ENGINEERED |
| | TRUSS DRAWINGS,SIGNED, SEALED AND DATE |
| | -ENGINEER TO SIGN, SEAL AND DATE TRUSS |
| | DRAWINGS AS WELL. |
| | NOTE: DON'T FORGET TO PROVIDE ALL THE |
| | INFORMATION REQUIRED BY FLORIDA |
| | STATUTE 471 WHEN SUBMITTING DOCUMENTS |
| | FOR PUBLIC RECORDS (NAME, LICENSE #, |
| | ADDRESS, ETC.). |
| | -ARCHITECT TO REVIEW ALL TRUSS DRAWINGS |
| | PRIOR TO SUBMITTAL TO THIS OFFICE. |
| | 5-PROVIDE SAFETY GLASS AS REQUIRED AT |
| | MASTER BATH, BEDROOM #3, LIVING ROOM, |
| | GARAGE (IF EDGE OF WINDOW IS LESS THAN |
| | 18" ABOVE FINISH FLOOR). SEE PLANS. |
| | SECTION 2405.2 SBC 1997. |
| | 6-SEE COMMENTS ON PLANS & REVISE/UPDATE |
| | DRAWINGS AS REQUIRED. |
| | |
| | |
| | |
| | |
| | |
| | NOTE: |
| | -PLEASE SUBMIT INFORMATION REQUIRED ON |
| | THIS PROVISO PRIOR TO CONSTRUCTION OR |
| | INSTALLATION IN ORDER TO AVOID DELAYS. |
