| Date |
Text |
| 2022-07-08 17:17:49 | ROOFING REVIEW: |
| | |
| | 1-PROVIDE PRODUCT APPROVAL AS REQUIRED BY FAC |
| | 61G20-3.001 FOR: |
| | (NOTE: THIS MAY BE SUBMITTED LATER AS A DEFERRED |
| | SUBMITTAL. PROVIDE COMPLETE INFORMATION FOR REVIEW |
| | PRIOR TO INSTALLATION TO AVOID CONFLICTS/DELAYS. ALL |
| | PRODUCT APPROVALS NEED TO BE APPROVED IN WRITING BY |
| | DESIGNER OF RECORD PRIOR TO SUBMITTAL): |
| | |
| | ORIGINAL COMMENT: |
| | A)METAL SHINGLES. PROVIDE COMPLETE AND CURRENT APPROVED |
| | PRODUCT APPROVAL. NEED COMPLETE FLORIDA PRODUCT |
| | APPROVAL, INCLUDING FLORIDA PRODUCT APPROVAL COVER PAGE |
| | SHOWING THE CURRENT CODE OR MIAMI DADE NOA. |
| | IF NONE OF THESE OPTIONS IS AVAILABLE, THEN |
| | MANUFACTURER MAY APPLY FOR LOCAL PRODUCT APPROVAL BY |
| | SUBMITTING COMPLETE ENGINEERING SIGNED AND SEALED |
| | DRAWINGS FOR BUILDING OFFICIAL APPROVAL. FAC |
| | 61G20-3.001. |
| | |
| | RESPONSE: |
| | (1)TWO DIFFERENT PRODUCT APPROVALS WERE SUBMITTED. |
| | SUBMIT EITHER A COMPLETE MIAMI DADE NOA OR A COMPLETE |
| | FLORIDA PRODUCT APPROVAL INCLUDING THE COVER PAGE THAT |
| | CORRESPONDS TO THE INFORMATION SUBMITTED. |
| | |
| | (2) CLEARLY MARK ON PRODUCT APPROVAL WHICH METAL |
| | ROOFING FASTENING OPTION IS GOING TO BE USED. NEED THIS |
| | TO VERIFY COMPLIANCE WITH THE DESIGN PRESSURES FOR ALL |
| | ROOF ZONES. |
| | |
| | ORIGINAL COMMENT: |
| | B)UNDERLAYMENT SPECIFIED ON PLANS FOR METAL SHINGLES. |
| | |
| | RESPONSE: |
| | PARTIALLY DONE. INFORMATION SUBMITTED IS MISSING |
| | FLORIDA PRODUCT APPROVAL COVER PAGE. |
| | NOTE: THE FLORIDA PRODUCT APPROVAL IS REQUIRED BECAUSE |
| | IT SHOWS IF PRODUCT IS APPROVED AND CURRENT CODE IN |
| | EFFECT. |
| | |
| | 2- ENGINEER OF RECORD TO REVIEW AND APPROVE IN WRITING |
| | (NOT SIGNING AND SEALING) ABOVE PRODUCT APPROVALS AS |
| | REQUIRED BY SEC. 107.3.4.1 CITY AMENDMENTS. |
| | |
| | PLEASE FEEL FREE TO CONTACT ME IF YOU HAVE ANY |
| | QUESTIONS REGARDING THESE COMMENTS, |
| | JULIO GOMEZ |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | BUILDING DIVISION |
| | (561)805-6712 |
| | [email protected] |
| | |
