| Date |
Text |
| 2021-10-25 11:53:51 | OFFICE BUILDOUT |
| | REVIEWED BY ROGER MCPHERSON |
| | 561-805-6716 |
| | [email protected] |
| | CODE USED FOR REVIEW - 2020 FBC WITH WPB CHAPTER 1 |
| | AMENDMENT |
| | |
| | CORRECTIONS NEEDED - |
| | 1) PLEASE SHOW THE WALL FINISH AROUND THE MOP SINK TO |
| | COMPLY WITH FBC 1210.2.2 WALLS AND PARTITIONS. |
| | WALLS AND PARTITIONS WITHIN 2 FEET (610 MM) OF SERVICE |
| | SINKS, URINALS AND WATER CLOSETS SHALL HAVE A SMOOTH, |
| | HARD, NONABSORBENT SURFACE, TO A HEIGHT OF NOT LESS |
| | THAN 4 FEET (1219 MM) ABOVE THE FLOOR, (DRYWALL IS NOT |
| | CONSIDERED A HARD SURFACE) |
| | |
| | 2) WALLS SHOWN IN DETAILS 4 AND 5 ON DRAWING A1.31 - |
| | SHOWS PAINT ON THE DRYWALL (DRYWALL IS NOT CONSIDERED A |
| | HARD SURFACE) FBC 1210.2.2 WALLS AND PARTITIONS. |
| | WALLS AND PARTITIONS WITHIN 2 FEET (610 MM) OF SERVICE |
| | SINKS, URINALS AND WATER CLOSETS SHALL HAVE A SMOOTH, |
| | HARD, NONABSORBENT SURFACE, TO A HEIGHT OF NOT LESS |
| | THAN 4 FEET (1219 MM) ABOVE THE FLOOR, |
| | |
| | 3) PLEASE PROVIDE THE RAISED FLOOR DETAILS - |
| | MANUFACTURE SPECS. FBC 107.2.1 |
| | |
| | 4) PLEASE SHOW THE TOILET PAPER DISPENSER LOCATION FROM |
| | THE FRONT OF THE TOILET PER FBC 604.7 DISPENSERS. |
| | TOILET PAPER DISPENSERS SHALL COMPLY WITH 309.4 AND |
| | SHALL BE 7 INCHES (180 MM) MINIMUM AND 9 INCHES (230 |
| | MM) MAXIMUM IN FRONT OF THE WATER CLOSET MEASURED TO |
| | THE CENTERLINE OF THE DISPENSER. |
| | |
| | 5) THE 18 INCH VERTICAL GRAB BAR IS NOT REQUIRED PER |
| | FBC - PLEASE SHOW THE REQUIRED 12 INCHES CLEARANCE |
| | BETWEEN THE TOP OF THE GRAB BAR AND PROTRUDING OBJECTS |
| | ABOVE THE HORIZONTAL GRAB BAR - FBC 609.3 THE SPACE |
| | BETWEEN THE GRAB BAR AND PROJECTING OBJECTS ABOVE SHALL |
| | BE 12 INCHES (305 MM) MINIMUM. |
