| Date |
Text |
| 2021-07-15 16:10:19 | PLAN |
| | REVIEW COMMENTS |
| | |
| | 1ST REVIEW: FBC SEVENTH EDITION (2020) |
| | ROBERT MCDOUGAL, CBO |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | (561) 805-6714 |
| | [email protected] |
| | |
| | DENIED BY BUILDING |
| | PLEASE ADDRESS THE ITEMS NOTED BELOW: |
| | |
| | 1) SUBMIT A DRAWING FOR THE STAIR GUARDS THAT CLEARLY |
| | SHOWS COMPLIANCE WITH THE FOLLOWING: |
| | |
| | R312.1.2 HEIGHT. REQUIRED GUARDS AT OPEN-SIDED WALKING |
| | SURFACES, INCLUDING STAIRS, PORCHES, BALCONIES OR |
| | LANDINGS, SHALL BE NOT LESS THAN 36 INCHES (914 MM) IN |
| | HEIGHT AS MEASURED VERTICALLY ABOVE THE ADJACENT |
| | WALKING SURFACE OR THE LINE CONNECTING THE LEADING |
| | EDGES OF THE TREADS. |
| | EXCEPTIONS: |
| | 1.GUARDS ON THE OPEN SIDES OF STAIRS SHALL HAVE A |
| | HEIGHT NOT LESS THAN 34 INCHES (864 MM) MEASURED |
| | VERTICALLY FROM A LINE CONNECTING THE LEADING EDGES OF |
| | THE TREADS. |
| | 2.WHERE THE TOP OF THE GUARD SERVES AS A HANDRAIL ON |
| | THE OPEN SIDES OF STAIRS, THE TOP OF THE GUARD SHALL BE |
| | NOT LESS THAN 34 INCHES (864 MM) AND NOT MORE THAN 38 |
| | INCHES (965 MM) AS MEASURED VERTICALLY FROM A LINE |
| | CONNECTING THE LEADING EDGES OF THE TREADS. |
| | |
| | R312.1.3 OPENING LIMITATIONS. REQUIRED GUARDS SHALL NOT |
| | HAVE OPENINGS FROM THE WALKING SURFACE TO THE REQUIRED |
| | GUARD HEIGHT THAT ALLOW PASSAGE OF A SPHERE 4 INCHES |
| | (102 MM) IN DIAMETER. |
| | EXCEPTIONS: |
| | 1.THE TRIANGULAR OPENINGS AT THE OPEN SIDE OF STAIR, |
| | FORMED BY THE RISER, TREAD AND BOTTOM RAIL OF A GUARD, |
| | SHALL NOT ALLOW PASSAGE OF A SPHERE 6 INCHES (153 MM) |
| | IN DIAMETER. |
| | 2.GUARDS ON THE OPEN SIDE OF STAIRS SHALL NOT HAVE |
| | OPENINGS THAT ALLOW PASSAGE OF A SPHERE 4-3/8 INCHES |
| | (111 MM) IN DIAMETER. |
| | |
| | 2) THE NAME AND SIGNATURE OF THE PERSON THAT IS |
| | DESIGNING AND PREPARING THE DRAWING IS REQUIRED. FBC |
| | AMEND. 107.2.1 - INFORMATION ON CONSTRUCTION DOCUMENTS. |
| | ALL INFORMATION, DRAWINGS, SPECIFICATIONS AND |
| | ACCOMPANYING DATA SHALL BEAR THE NAME AND SIGNATURE OF |
| | THE PERSON RESPONSIBLE FOR THE DESIGN. |
| | |
