| Date |
Text |
| 2022-01-27 09:34:39 | PLAN REVIEW BUILDING |
| | |
| | CHRISTOPHER S. THROOP, C.B.O., CFM |
| | PLANS EXAMINER II PX3169/SFP306 |
| | INSPECTOR BN4338 |
| | BUILDING OFFICIAL BU1635 |
| | ASFPM CERTIFIED FLOODPLAIN MANAGER US-21-11935 |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | CITY OF WEST PALM BEACH |
| | (561) 805-6726 |
| | [email protected] |
| | |
| | CODES IN EFFECT: |
| | 2020 FLORIDA BUILDING CODE, 7TH EDITION W/2017 WEST |
| | PALM BEACH AMENDMENTS TO THE FLORIDA BUILDING CODE, |
| | CHAPTER 1 ADMINISTRATION |
| | 2017 NEC |
| | |
| | 3RD REVIEW |
| | |
| | RESULTS: DENIED |
| | ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT |
| | |
| | COMMENTS FROM 2ND REVIEW HAVE NOT BEEN ADDRESSED. SEE |
| | BELOW. |
| | |
| | PREVIOUS COMMENTS THAT HAVE BEEN ADDRESSED |
| | SATISFACTORILY ARE MARKED AS CORRECTED. |
| | PREVIOUS COMMENTS THAT HAVE NOT BEEN ADDRESSED |
| | SATISFACTORILY MAY HAVE ADDITIONAL COMMENTS IN |
| | PARENTHESES. ANY NEW COMMENT WILL BE LISTED AFTER |
| | PREVIOUS COMMENTS. |
| | |
| | |
| | PROVIDE THE FOLLOWING INFORMATION: |
| | |
| | PRE-FABRICATED CARPORTS |
| | |
| | 1. PROVIDE A SITE PLAN. CORRECTED |
| | |
| | 2. PROVIDE THE STATE PRODUCT APPROVAL PER RULE |
| | 61G20-3.006 (FAC) |
| | OR STATE MANUFACTURERS CERTIFICATION PER CHPT. 553, |
| | PART 1 FS FOR THE CARPORT. (YOUR SUPPLIER SHOULD |
| | PROVIDE THIS) |
| | |
| | 3. THE PRODUCT APPROVAL SHOULD INCLUDE EITHER A |
| | FOUNDATION DETAIL OR A TIE-DOWN DETAIL. IF IT DOESN?T, |
| | YOU WILL HAVE TO PROVIDE A TIE DOWN DETAIL THAT MEETS |
| | THE DESIGN WIND LOADS. |
| | |
| | |
| | SITE-BUILT CARPORTS |
| | |
| | NOTICE: |
| | EVERY STRUCTURE SUBJECT TO WIND LOADS SHALL BE DESIGNED |
| | PER FBC RES CHPT 3 SECTION R301 OR ASCE 7 |
| | R301.2.1 WIND DESIGN CRITERIA. |
| | BUILDINGS AND PORTIONS THEREOF SHALL BE CONSTRUCTED IN |
| | ACCORDANCE WITH THE WIND PROVISIONS OF THIS CODE USING |
| | THE BASIC WIND SPEED IN TABLE R301.2(1) AS DETERMINED |
| | FROM FIGURE R301.2(4). |
| | |
| | 1. PROVIDE A SITE PLAN. CORRECTED |
| | |
| | 2. PROVIDE THE FOLLOWING PLANS: |
| | |
| | 2A) PROVIDE A FOUNDATION/TIE DOWNS DETAIL. |
| | 2B) PROVIDE REQUIRED DIMENSIONS. |
| | 2C) PROVIDE A WALL PLAN WITH WALL TO FLOOR CONNECTION |
| | DETAIL |
| | 2D) PROVIDE A ROOF FRAMING PLAN WITH ROOF TO WALL |
| | CONNECTION DETAIL |
| | |
| | 3. DESIGNER SHALL PRINT THEIR NAME AND SIGN EACH PLAN |
| | PAGE. |
| | FBC 107.2.1 ALL INFORMATION, DRAWINGS, SPECIFICATIONS |
| | AND ACCOMPANYING DATA SHALL BEAR THE NAME AND SIGNATURE |
| | OF THE PERSON RESPONSIBLE FOR THE DESIGN. (SEE ALSO |
| | SECTION 107.3.5), CHPT. 471, F.S. & 61G15 AND CHPT. |
| | 481, F.S. & 61G1. |
| | |
| | PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED |
| | MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS. |
| | |
| | |
| | |
| | |
| | |
| | |
