| Date |
Text |
| 2021-05-13 15:44:48 | FAILED |
| | |
| | ARCADE IDENTIFY SIGN |
| | |
| | 1) PROVIDE AN ELEVATION DRAWING OF THE STOREFRONT |
| | SHOWING WHERE THE SIGN WILL BE LOCATED. THE DRAWING |
| | ALSO NEEDS TO PROVIDE THE LENGTH OF THE STOREFRONT SO |
| | STAFF CAN CONFIRM THE PERMITTED SIGN SQUARE FOOTAGE AND |
| | THAT IT DOES NOT EXCEED 50% OF THE STOREFRONT FRONTAGE. |
| | ADDITIONALLY, SINCE THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA STOREFRONT TYPE 2 REQUIRES THAT THE ARCADE |
| | IDENTITY SIGN IS CENTERED ON THE FACADE IN FRONT OF THE |
| | TENANT?S ENTRY, THE DRAWING NEEDS TO VERIFY THIS |
| | REQUIREMENT. |
| | |
| | 2) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE |
| | THAT ARCADE IDENTITY SIGNS BE CENTERED WITHIN THE |
| | ARCADE ARCHWAY. PROVIDE DIMENSIONS TO VERIFY THIS |
| | REQUIREMENT. |
| | |
| | 3) THE ENGINEERING PLAN STATES THAT THE SIGN IS A |
| | CABINET SIGN, WHICH IS NOT A PERMITTED ARCADE IDENTITY |
| | SIGN TYPE. THE ROSEMARY SQUARE TENANT SIGN CRITERIA |
| | ESTABLISH FOUR OPTIONS FOR ARCADE IDENTITY SIGNS: |
| | A. SUSPENDED RACEWAYS WITH LETTERS MOUNTED TO THE |
| | RACEWAY |
| | B. INDIVIDUAL SUSPENDED LETTERS |
| | C. LETTERING MOUNTED TO THE FACE OF A SUSPENDED PANEL |
| | D. LETTERS MOUNTED TO VERTICAL SUPPORTED RACEWAYS |
| | |
| | 4) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE |
| | THAT ALL CONDUIT, CROSSOVERS, WIRING, JUNCTION BOXES, |
| | ETC. NECESSARY FOR THE SIGN?S ELECTRICAL CONNECTION TO |
| | BE CONCEALED AND NOT VISIBLE TO THE PUBLIC. THE |
| | DRAWINGS INDICATE THAT THE JUNCTION BOX AND THE WIRING |
| | FROM THE SIGN TO THE JUNCTION BOX AND THE JUNCTION BOX |
| | TO THE POWER SUPPLY WILL BE MOUNTED TO THE WALL ABOVE |
| | THE ARCADE, AND THUS THEY WILL BE VISIBLE TO THE |
| | PUBLIC, WHICH IS NOT PERMITTED. |
| | |
| | 5) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE |
| | THAT RIVETS, SCREWS AND OTHER FASTENERS THAT EXTEND TO |
| | VISIBLE SURFACES SHALL BE FLUSH, FILLED AND FINISHED SO |
| | AS TO BE UNNOTICEABLE. THE BOLT HEADS THAT EXTEND PAST |
| | THE MOUNTING PLATE DO NOT MEET THIS STANDARD. IF THE |
| | BOLT HEADS MUST EXTEND PAST THE MOUNTING PLATE, THEY |
| | NEED TO BE CONCEALED BY CAPS MATCHING THE COLOR OF THE |
| | MOUNTING PLATE. THE PAN HEAD SCREWS THAT ARE USED ON |
| | THE TOP AND BOTTOM OF THE LETTER DO NOT COMPLY WITH |
| | THIS REQUIREMENT. |
| | |
| | CONTACT ERIC SCHNEIDER @ (561) 822-1446. |
| | [email protected] |
| | |
| | |
