| Date |
Text |
| 2021-07-22 11:15:24 | NEW SFR |
| | REVIEWED BY ROGER MCPHERSON |
| | 561-805-6716 |
| | [email protected] |
| | CODE USED FOR REVIEW - 2020 FBC WITH WPB CHAPTER 1 |
| | AMENDMENTS |
| | |
| | CORRECTIONS NEEDED - FBC WPB AMENDMENTS 107 |
| | 1) DRAWING A0.2 SHOWS THE CODE AS (THE INTERNATIONAL |
| | AND WIND DESIGN PER ASCE 7-05) DRAWING A2.1 FOUNDATION |
| | DETAILS SHOWS ASCE 7-10 - PLEASE CHECK ALL DRAWINGS - |
| | CODE IN EFFECT CHANGED ON 1/1/2021 - PLEASE REVISE THE |
| | DRAWINGS SHOWING THE DESIGN PER THE CODE IN EFFECT |
| | (2020 FBC AND ASCE 7-16) |
| | 2) DO NOT SEE THE CONTAINER SPECS - NEED A CONTAINER |
| | DESIGNATION NUMBER/SERIAL NUMBER SOMETHING STATING THE |
| | CORRECT CONTAINER IS BEING USED AS A COMPONENT TO YOUR |
| | DESIGN - THE CONTAINER IS THE STRUCTURAL BUILDING SO |
| | PLEASE SHOW THE CONTAINER SPECIFICATIONS ON THE |
| | DRAWINGS. |
| | 3) PLEASE SHOW HOW AND WHAT STRUCTURAL ELEMENT THAT THE |
| | ALL THREAD IS ATTACHED TO - PLEASE PROVIDE DETAILS FOR |
| | THE AIR HANDLER SUPPORT SHOWN IN THE HALLWAY CEILING. |
| | 4) PRODUCT APPROVAL PROVIDED FOR THE SINGLE HUNG |
| | WINDOWS (20-0813.08) IS NOT THE PRODUCT APPROVAL NUMBER |
| | LISTED ON THE DRAWINGS (17-1212.21) - PLEASE PROVIDE |
| | THE PRODUCT APPROVALS THAT ARE LISTED ON THE DRAWINGS. |
| | DRAWINGS WILL NEED TO BE REVISED IF CHANGING PRODUCT |
| | APPROVALS BECAUSE THE PRODUCT APPROVAL NUMBERS ARE |
| | LISTED ON THE DRAWINGS. |
| | 5) PRODUCT APPROVAL PROVIDED FOR THE DOOR (17347.11) IS |
| | NOT THE PRODUCT APPROVAL NUMBER LISTED ON THE DRAWINGS |
| | (17184.11) - PLEASE PROVIDE THE PRODUCT APPROVALS THAT |
| | ARE LISTED ON THE DRAWINGS. DRAWINGS WILL NEED TO BE |
| | REVISED IF CHANGING PRODUCT APPROVALS BECAUSE THE |
| | PRODUCT APPROVAL NUMBERS ARE LISTED ON THE DRAWINGS. |
| | 6) PRODUCT APPROVAL FOR THE LOW SLOPE ROOFING |
| | (180919.07) IS NOT THE PRODUCT APPROVAL LISTED ON THE |
| | DRAWINGS (35402) - PLEASE PROVIDE THE PRODUCT APPROVALS |
| | THAT ARE LISTED ON THE DRAWINGS. DRAWINGS WILL NEED TO |
| | BE REVISED IF CHANGING PRODUCT APPROVALS BECAUSE THE |
| | PRODUCT APPROVAL NUMBERS ARE LISTED ON THE DRAWINGS. |
| | 7) SITE PLAN PROVIDED DOES NOT SHOW THE BUILDING |
| | DISTANCE FROM THE PROPERTY LINES, DOES NOT SHOW THE |
| | FLOOD ZONE, DOES NOT SHOW GRADE ELEVATIONS - PLEASE |
| | PROVIDE A SURVEY/SITE PLAN SHOWING THE FOLLOWING |
| | INFORMATION 107.2.5 SITE PLAN. THE CONSTRUCTION |
| | DOCUMENTS SUBMITTED WITH THE APPLICATION FOR PERMIT |
| | SHALL BE ACCOMPANIED BY A SITE PLAN SHOWING TO SCALE |
| | THE SIZE AND LOCATION OF NEW CONSTRUCTION AND EXISTING |
| | STRUCTURES ON THE SITE, DISTANCES FROM LOT LINES, THE |
| | ESTABLISHED STREET GRADES AND THE PROPOSED FINISHED |
| | GRADES, DEPICTING THE PROPOSED LOT DRAINAGE AND, AS |
| | APPLICABLE, FLOOD HAZARD AREAS, FLOODWAYS, AND DESIGN |
| | FLOOD ELEVATIONS; AND IT SHALL BE DRAWN IN ACCORDANCE |
| | WITH AN ACCURATE AND INCLUDED ON A BOUNDARY LINE |
| | SURVEY. (PLEASE PROVIDE CUT SECTIONS FOR ANY PROPOSED |
| | WATER RETAINING SWALES) |
| | 8) JOB VALUE SHOWN ON THE BUILDING PERMIT APPLICATION |
| | APPEARS TO BE LOW - PLEASE PROVIDE A COST BREAKDOWN - |
| | FBC 109.3 BUILDING PERMIT VALUATION. FOR PERMITTING |
| | PURPOSES, VALUATION OF BUILDINGS AND SYSTEMS SHALL BE |
| | TOTAL REPLACEMENT VALUE TO INCLUDE STRUCTURAL, |
| | ELECTRIC, PLUMBING, MECHANICAL, INTERIOR FINISH, |
| | RELATIVE SITE WORK, ARCHITECTURAL AND DESIGN FEES, |
| | MARKETING COST, OVERHEAD AND PROFIT; EXCLUDING ONLY |
| | LAND VALUE. VALUATION REFERENCES MAY INCLUDE THE LATEST |
| | PUBLISHED DATA OF NATIONAL CONSTRUCTION COST ANALYSIS |
| | SERVICES (MARSHALL ? SWIFT, MEANS, ETC.) AS PUBLISHED |
| | BY INTERNATIONAL CODE CONGRESS. FINAL BUILDING PERMIT |
| | VALUATION SHALL BE SET BY THE BUILDING OFFICIAL. |
| | |
| | |
| | |
