| Date |
Text |
| 2021-02-05 13:49:40 | NEW SFR DETACHED GARAGE AND GUEST HOUSE |
| | REVIEWED BY ROGER MCPHERSON |
| | 561-805-6716 |
| | [email protected]. |
| | CODE USED FOR REVIEW - 2020 FBC WITH WPB CHAPTER 1 |
| | AMENDMENTS |
| | |
| | CORRECTIONS NEEDED - FBC WPB AMENDMENTS 107 |
| | 1) PLEASE SHOW THE 2ND FLOOR GUEST HOUSE EXIT DOOR |
| | WIDTH TO COMPLY WITH R311.2 EGRESS DOOR. |
| | NOT LESS THAN ONE EGRESS DOOR SHALL BE PROVIDED FOR |
| | EACH DWELLING UNIT. THE EGRESS DOOR SHALL BE |
| | SIDE-HINGED, AND SHALL PROVIDE A CLEAR WIDTH OF NOT |
| | LESS THAN 32 INCHES (813 MM) WHERE MEASURED BETWEEN THE |
| | FACE OF THE DOOR AND THE STOP, WITH THE DOOR OPEN 90 |
| | DEGREES (1.57 RAD). THE CLEAR HEIGHT OF THE DOOR |
| | OPENING SHALL BE NOT LESS THAN 78 INCHES (1981 MM) IN |
| | HEIGHT MEASURED FROM THE TOP OF THE THRESHOLD TO THE |
| | BOTTOM OF THE STOP. |
| | 2) PLEASE SHOW THE SIDING AND FURRING ATTACHMENTS (TYPE |
| | OF ANCHOR, SIZE OF ANCHOR AND ON CENTER SPACING OF THE |
| | ANCHORS). FBC R703.1.2 |
| | 3) PLEASE DESCRIBE THE EXTERIOR WALL WATER PROOFING |
| | SHOWN ON DRAWING A-3 FBC R703.1.1 |
| | 4) PLEASE PROVIDE COMPLETE MIAMI DADE OR FLORIDA STATE |
| | PRODUCT APPROVALS FOR THE EXTERIOR WINDOWS, DOORS AND |
| | ROOFING SYSTEM. |
| | 5) ALL PRODUCT APPROVALS NEED TO BE REVIEWED AND MARKED |
| | APPROVED BY THE BUILDING DESIGNER OF RECORD OR BE |
| | LISTED BY PRODUCT APPROVAL NUMBER ON THE DRAWINGS. |
| | 6) THE CODE IN EFFECT CHANGED ON 1/1/2021 - PLEASE |
| | REVISE THE DRAWINGS TO REFLECT THE CODE IN EFFECT FOR |
| | THE BUILDING DESIGN (FBC 2020 AND ASCE 7-16) |
| | 7) DRAWINGS SHOW AN EXISTING STRUCTURE - EXISTING |
| | STRUCTURE REQUIRES A SEPARATE BUILDING PERMIT FOR |
| | DEMOLITION - PLEASE PROVIDE THE DEMOLITION PERMIT |
| | NUMBER. |
| | 8) ROOFING SYSTEM AND WINDOW/ DOOR PRODUCT APPROVALS |
| | MAY BE DEFERRED SUBMITTALS BY LISTING ITEMS TO BE |
| | DEFERRED ON THE CONSTRUCTION DOCUMENTS - 107.3.4.1 |
| | DEFERRED SUBMITTALS. FOR THE PURPOSES OF THIS SECTION, |
| | DEFERRED SUBMITTALS ARE DEFINED AS THOSE PORTIONS OF |
| | THE DESIGN THAT ARE NOT SUBMITTED AT THE TIME OF THE |
| | APPLICATION AND THAT ARE TO BE SUBMITTED TO THE |
| | BUILDING OFFICIAL WITHIN A SPECIFIED PERIOD. DEFERRAL |
| | OF ANY SUBMITTAL ITEMS SHALL HAVE THE PRIOR APPROVAL OF |
| | THE BUILDING OFFICIAL. THE REGISTERED DESIGN |
| | PROFESSIONAL IN RESPONSIBLE CHARGE SHALL LIST THE |
| | DEFERRED SUBMITTALS ON THE CONSTRUCTION DOCUMENTS FOR |
| | REVIEW BY THE BUILDING OFFICIAL. DOCUMENTS FOR DEFERRED |
| | SUBMITTAL ITEMS SHALL BE SUBMITTED TO THE REGISTERED |
| | DESIGN PROFESSIONAL IN RESPONSIBLE CHARGE WHO SHALL |
| | REVIEW THEM AND FORWARD THEM TO THE BUILDING OFFICIAL |
| | WITH A NOTATION INDICATING THAT THE DEFERRED SUBMITTAL |
| | DOCUMENTS HAVE BEEN REVIEWED AND FOUND TO BE IN GENERAL |
| | CONFORMANCE TO THE DESIGN OF THE BUILDING. THE DEFERRED |
| | SUBMITTAL ITEMS SHALL NOT BE INSTALLED UNTIL THE |
| | DEFERRED SUBMITTAL DOCUMENTS HAVE BEEN APPROVED BY THE |
| | BUILDING OFFICIAL. |
