| Plan Review Notes For Permit 20091183 |
| Permit Number |
20091183 |
|
| Review Stop |
B |
| Sequence Number |
1 |
|
| Notes |
| Date |
Text |
| 2020-10-06 13:46:03 | BUSINESS RENOVATION | | | REVIEWED BY ROGER MCPHERSON | | | 561-805-6716 | | | [email protected] | | | CODE USED FOR REVIEW - 2017 FBC WITH WPB CHAPTER 1 | | | AMENDMENTS | | | | | | CORRECTIONS NEEDED - FBC WPB AMENDMENTS 107 | | | 1) DRAWING A2.1 MIRROR NOTE SAYS 40" TO THE BOTTOM OF | | | THE EDGE (SHOULD SAY BOTTOM EDGE OF THE REFLECTION) FBC | | | ACCESSIBILITY 603.3MIRRORS. | | | MIRRORS LOCATED ABOVE LAVATORIES OR COUNTERTOPS SHALL | | | BE INSTALLED WITH THE BOTTOM EDGE OF THE REFLECTING | | | SURFACE 40 INCHES (1015 MM) MAXIMUM ABOVE THE FINISH | | | FLOOR OR GROUND. | | | 2) SHOW RESTROOM BASE BOARD (CANNOT BE WOOD) TO COMPLY | | | WITH FBC 1210.2.1 FLOORS AND WALL BASES. | | | IN OTHER THAN DWELLING UNITS, TOILET, BATHING AND | | | SHOWER ROOM FLOOR FINISH MATERIALS SHALL HAVE A SMOOTH, | | | HARD, NONABSORBENT SURFACE. THE INTERSECTIONS OF SUCH | | | FLOORS WITH WALLS SHALL HAVE A SMOOTH, HARD, | | | NONABSORBENT VERTICAL BASE THAT EXTENDS UPWARD ONTO THE | | | WALLS NOT LESS THAN 4 INCHES (102 MM). | | | 3) SHOW THE GRAB BAR HEIGHTS TO COMPLY WITH FBC 609.4 | | | POSITION OF GRAB BARS. | | | GRAB BARS SHALL BE INSTALLED IN A HORIZONTAL POSITION, | | | 33 INCHES (840 MM) MINIMUM AND 36 INCHES (915 MM) | | | MAXIMUM ABOVE THE FINISH FLOOR MEASURED TO THE TOP OF | | | THE GRIPPING SURFACE, |
|
