| Date |
Text |
| 2020-10-28 11:45:47 | FAILED |
| | |
| | PROVIDE WRITTEN RESPONSES TO COMMENTS. |
| | |
| | PLEASE NOTE THAT THE WAIVER I LETTER FROM CITYPLACE |
| | RETAIL, LLC, MUST SPECIFICALLY APPROVE THE WAIVERS THAT |
| | THEY ARE APPROVING. THE LETTER THAT WAS SUBMITTED (FOR |
| | A SECOND TIME) JUST AUTHORIZED THE CONTRACTOR TO DO THE |
| | WORK. |
| | |
| | BLADE SIGN C (WEST FACADE) |
| | |
| | 1) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA LIMIT WALL MOUNTED BLADE SIGN PANELS TO HAVE A |
| | MAXIMUM SIGN FACE OF FOUR (4) SQUARE FEET. THE PROPOSED |
| | SIGN IS 4.04 SQUARE FEET IN AREA. CITYPLACE RETAIL MAY |
| | APPROVE IN WRITING A WAIVER I TO INCREASE IN THE SIGN |
| | SQUARE FOOTAGE BY 25 PERCENT, WHICH WOULD PERMIT THIS |
| | SIGN AT THE PROPOSED SIZE. |
| | |
| | 2) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRE THAT THE SIGN COPY AREA SHALL MAINTAIN |
| | A MARGIN AT LEAST THREE (3) INCHES FROM ANY EDGE OF THE |
| | PERCEIVED SIGN AREA (TOP, SIDES AND BOTTOM). PROVIDE A |
| | DETAIL OF THE SIGN FACE THAT VERIFIES THIS REQUIREMENT. |
| | |
| | 3) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA PERMIT THE PUSH THROUGH LETTERS TO HAVE HALO |
| | ILLUMINATION. PLEASE VERIFY THAT THE PROPOSED LETTERS |
| | WILL HAVE HALO ILLUMINATION AND NOT BE ILLUMINATED |
| | LETTERS. IF THE LETTERS ARE TO BE ILLUMINATED (WHICH |
| | THEY APPEAR TO BE CONTRARY TO THE "HALO ILLUMINATED" |
| | NOTE ON THE SIGN TYPE TABLE), THEN CITYPLACE RETAIL |
| | MUST APPROVE IN WRITING A WAIVER I TO PERMIT THE |
| | ALTERNATE ILLUMINATION STYLE. |
| | |
| | 4) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRES THAT ALL CONDUIT, CROSSOVERS, WIRING |
| | NECESSARY FOR THE SIGN'S ELECTRICAL CONNECTION TO BE |
| | CONCEALED AND NOT VISIBLE TO THE PUBLIC. THE PLANS DO |
| | NOT CLEARLY SHOW THAT THE WIRING IS LOCATED WITHIN THE |
| | MOUNTING TUBES LEADING TO THE INTERIOR OF THE SIGN |
| | PANEL. THIS NEEDS TO BE CLARIFIED. |
| | |
| | 5) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRE THAT RIVETS, SCREWS AND OTHER |
| | FASTENERS THAT EXTEND TO VISIBLE SURFACES SHALL BE |
| | FLUSH, FILLED AND FINISHED SO AS TO BE UNNOTICEABLE. |
| | THE BOLT HEADS THAT EXTEND PAST THE MOUNTING PLATE DO |
| | NOT MEET THIS STANDARD. IF THE BOLT HEADS MUST EXTEND |
| | PAST THE MOUNTING PLATE, THEY NEED TO BE CONCEALED BY |
| | CAPS MATCHING THE COLOR OF THE MOUNTING PLATE. |
| | |
| | 6) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRE THAT ALL INSTALLATION COMPONENTS |
| | CONSIST OF ANODIZED ALUMINUM. PROVIDE ON THE PLANS |
| | VERIFICATION THAT THE MOUNTING PLATE AND TUBES, |
| | INCLUDING DECORATIVE FINIAL, ARE ANODIZED ALUMINUM. |
| | |
| | 7) UPDATED COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRE THE STUD MOUNTS TO BE SERIES 316 |
| | STAINLESS STEEL ANCHOR BOLTS. PROVIDE VERIFICATION OF |
| | THIS REQUIREMENT ON THE PLANS. ----- THE PLANS ADDED |
| | THAT 1/4 INCH TAPCONS WILL BE USED. TAPCONS SO NOT |
| | APPEAR TO BE MANUFACTURED WITH 316 STAINLESS STEEL, SO |
| | THEY MAY NOT BE USED. |
| | |
| | 8) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA LIMITS THE SIGN COPY TO TRADE NAMES ONLY. THE |
| | LISTING OF MERCHANDISE OR DESCRIPTIONS OF CATEGORY OR |
| | THE ELABORATION OF THE COMPANY'S PRODUCTS OR SERVICES |
| | (THE TO GO SERVICE) IS ONLY PERMITTED AS A WAIVER I. A |
| | WAIVER I REQUIRES WRITTEN APPROVAL FROM CITYPLACE |
| | RETAIL. |
| | |
| | BLADE SIGN G (NORTH FACADE) |
| | |
| | 1) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRE THAT THE SIGN COPY AREA SHALL MAINTAIN |
| | A MARGIN AT LEAST THREE (3) INCHES FROM ANY EDGE OF THE |
| | PERCEIVED SIGN AREA (TOP, SIDES AND BOTTOM). PROVIDE A |
| | DETAIL OF THE SIGN FACE THAT VERIFIES THIS REQUIREMENT. |
| | |
| | 2) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA PERMIT THE PUSH THROUGH LETTERS TO HAVE HALO |
| | ILLUMINATION. PLEASE VERIFY THAT THE PROPOSED LETTERS |
| | WILL HAVE HALO ILLUMINATION AND NOT BE ILLUMINATED |
| | LETTERS. IF THE LETTERS ARE TO BE ILLUMINATED, THEN |
| | CITYPLACE RETAIL MUST APPROVE IN WRITING A WAIVER I TO |
| | PERMIT THE ALTERNATE ILLUMINATION STYLE. |
| | |
| | 3) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRES THAT ALL CONDUIT, CROSSOVERS, WIRING |
| | NECESSARY FOR THE SIGN'S ELECTRICAL CONNECTION TO BE |
| | CONCEALED AND NOT VISIBLE TO THE PUBLIC. THE PLANS DO |
| | NOT CLEARLY SHOW THAT THE WIRING IS LOCATED WITHIN THE |
| | MOUNTING TUBES LEADING TO THE INTERIOR OF THE SIGN |
| | PANEL. THIS NEEDS TO BE CLARIFIED. |
| | |
| | 4) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRE THAT RIVETS, SCREWS AND OTHER |
| | FASTENERS THAT EXTEND TO VISIBLE SURFACES SHALL BE |
| | FLUSH, FILLED AND FINISHED SO AS TO BE UNNOTICEABLE. |
| | THE BOLT HEADS THAT EXTEND PAST THE MOUNTING PLATE DO |
| | NOT MEET THIS STANDARD. IF THE BOLT HEADS MUST EXTEND |
| | PAST THE MOUNTING PLATE, THEY NEED TO BE CONCEALED BY |
| | CAPS MATCHING THE COLOR OF THE MOUNTING PLATE. |
| | |
| | 5) REPEAT COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRE THAT ALL INSTALLATION COMPONENTS |
| | CONSIST OF ANODIZED ALUMINUM. PROVIDE ON THE PLANS |
| | VERIFICATION THAT THE MOUNTING PLATE AND TUBES, |
| | INCLUDING DECORATIVE FINIAL, ARE ANODIZED ALUMINUM. |
| | |
| | 6) UPDATED COMMENT: THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA REQUIRE THE STUD MOUNTS TO BE SERIES 316 |
| | STAINLESS STEEL ANCHOR BOLTS. PROVIDE VERIFICATION OF |
| | THIS REQUIREMENT ON THE PLANS. ----- THE PLANS ADDED |
| | THAT 1/4 INCH TAPCONS WILL BE USED. TAPCONS SO NOT |
| | APPEAR TO BE MANUFACTURED WITH 316 STAINLESS STEEL, SO |
| | THEY MAY NOT BE USED. |
| | |
| | CONTACT ERIC SCHNEIDER @ (561) 822-1446 |
| | [email protected] |
| | |
