| Plan Review Notes For Permit 20080481 |
| Permit Number |
20080481 |
|
| Review Stop |
R |
| Sequence Number |
1 |
|
| Notes |
| Date |
Text |
| 2020-09-21 18:02:41 | 1-- PROVIDE PRODUCT APPROVAL (2 COPIES) AS REQUIRED BY | | | FAC 61G20-3.001 FOR | | | (NOTE: THIS MAY BE SUBMITTED LATER AS A DEFERRED | | | SUBMITTAL. PROVIDE COMPLETE INFORMATION PRIOR TO | | | INSTALLATION TO AVOID CONFLICTS/DELAYS. ALL PRODUCT | | | APPROVALS NEED TO BE APPROVED IN WRITING BY DESIGNER OF | | | RECORD PRIOR TO SUBMITTAL): | | | | | | A)ROOF TILE AND SPECIFY FASTENING. IF SPECIFYING ROOF | | | TILE ADHESIVE, THEN PROVIDE PRODUCT APPROVAL. IF | | | SPECIFYING SCREWS, THEN SPECIFY SCREW SIZE AND NUMBER | | | OF SCREWS. | | | | | | B)ROOF TILE ADHESIVE. SEE ROOF TILE NOA SUBMITTED FOR | | | LISTED ADHESIVES. AND CLEARLY MARK PADDY SIZE AS | | | REQUIRED BY CITY POLICY FOR ALL ROOFING PERMITS. | | | | | | C)FLAT ROOF AS SHOWN ON PLANS. AND, CLEARLY MARK WHICH | | | APPROVED ASSEMBLY IS GOING TO BE INSTALLED TO VERIFY | | | COMPLIANCE WITH THE DESIGN PRESSURES OF SEC. R301.1 | | | FBC-RESIDENTIAL. | | | NOTE: IF THE SELECTED ASSEMBLY DOESN'T MEET THE DESIGN | | | PRESSURES FOR ALL ROOF ZONES, THEN SIGNED AND SEALED | | | RAS 117 CALCULATIONS ARE REQUIRED. | | | | | | PLEASE FEEL FREE TO CONTACT ME IF YOU HAVE ANY | | | QUESTIONS REGARDING THESE COMMENTS, | | | JULIO GOMEZ | | | COMMERCIAL COMBINATION PLANS EXAMINER | | | DEVELOPMENT SERVICES DEPARTMENT | | | BUILDING DIVISION | | | (561)805-6712 | | | [email protected] | | | |
|
