| Date |
Text |
| 2020-07-15 16:11:31 | FAILED |
| | |
| | ARCADE IDENTITY SIGN - TYPE 1D OPTION C SUSPENDED PANEL |
| | |
| | PROVIDE WRITTEN RESPONSES TO COMMENTS. |
| | |
| | 1) THE CITYPLACE MANAGEMENT APPROVAL STAMP IS REQUIRED |
| | ON THE PLANS. |
| | |
| | 2) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE |
| | THAT THE SIGN COPY AREA SHALL MAINTAIN A MARGIN AT |
| | LEAST SIX (6) INCHES FROM ANY EDGE OF THE PERCEIVED |
| | SIGN AREA. PROVIDE A DETAIL OF THE SIGN FACE THAT |
| | VERIFIES THIS REQUIREMENT. PLEASE NOTE THAT USING THE |
| | DIMENSIONS PROVIDED; IT DOES NOT APPEAR THAT THE SIX |
| | (6) INCH MINIMUM IS MET. CITYPLACE RETAIL CURRENTLY HAS |
| | AN AMENDMENT TO THE ROSEMARY SQUARE TENANT SIGN |
| | CRITERIA UNDER REVIEW BY THE CITY. IF APPROVED |
| | (TENTATIVELY IN SEPTEMBER), THE MARGIN WILL BE REDUCED |
| | TO THREE (3) INCHES MINIMUM; HOWEVER, ZONING CANNOT |
| | APPROVE THREE (3) INCHES UNTIL THE AMENDMENT HAS |
| | PASSED. |
| | |
| | 3) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE |
| | THAT ARCADE IDENTITY SIGNS BE CENTERED WITHIN THE |
| | ARCADE ARCHWAY. PROVIDE DIMENSIONS TO VERIFY THIS |
| | REQUIREMENT. |
| | |
| | 4) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE |
| | THAT RIVETS, SCREWS AND OTHER FASTENERS THAT EXTEND TO |
| | VISIBLE SURFACES SHALL BE FLUSH, FILLED AND FINISHED SO |
| | AS TO BE UNNOTICEABLE. THE BOLT HEADS THAT EXTEND PAST |
| | THE MOUNTING PLATE DO NOT MEET THIS STANDARD. IF THE |
| | BOLT HEADS MUST EXTEND PAST THE MOUNTING PLATE, THEY |
| | NEED TO BE CONCEALED BY CAPS MATCHING THE COLOR OF THE |
| | MOUNTING PLATE. |
| | |
| | 5) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRES |
| | THAT ALL CONDUIT, CROSSOVERS, WIRING NECESSARY FOR THE |
| | SIGN'S ELECTRICAL CONNECTION TO BE CONCEALED AND NOT |
| | VISIBLE TO THE PUBLIC. IT IS UNCLEAR FROM THE PLANS |
| | THAT WERE PROVIDED IF THE POWER SUPPLY, ELECTRICAL |
| | SOURCE, CONDUIT, AND ASSOCIATED WIRING. NOTE: EXPOSED |
| | CONDUIT ATTACHED TO THE COLUMN DOES NOT MEET THIS |
| | REQUIREMENT. |
| | |
| | 6) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE THE |
| | STUD MOUNTS TO BE SERIES 316 STAINLESS STEEL ANCHOR |
| | BOLTS. PROVIDE VERIFICATION OF THIS REQUIREMENT ON THE |
| | PLANS. |
| | |
| | 7) THE BACKER PANEL SETS THE SIZE OF THE SIGN. |
| | |
| | PERMITTED: 20.67 SF |
| | PROPOSED: 12 SF |
| | |
| | CONTACT ERIC SCHNEIDER @ (561) 822-1446 |
| | [email protected] |
