| Date |
Text |
| 2020-06-25 08:42:56 | PLAN |
| | REVIEW COMMENTS |
| | |
| | 1ST REVIEW: FBC SIXTH EDITION (2017) |
| | ROBERT MCDOUGAL, CBO |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | (561) 805-6714 |
| | [email protected] |
| | |
| | DENIED BY BUILDING |
| | PLEASE ADDRESS THE ITEMS NOTED BELOW: |
| | |
| | 1) SUBMIT A SIGNED AND NOTARIZED OWNER BUILDER |
| | AFFIDAVIT FORM. |
| | |
| | 2) THE VALUE OF $2000.00 FOR THIS WORK IS LOW. FBC |
| | 109.3 BUILDING PERMIT VALUATION. FOR PERMITTING |
| | PURPOSES, VALUATION OF BUILDINGS AND SYSTEMS SHALL BE |
| | TOTAL REPLACEMENT VALUE TO INCLUDE STRUCTURAL, |
| | ELECTRIC, PLUMBING, MECHANICAL, INTERIOR FINISH, |
| | RELATIVE SITE WORK, ARCHITECTURAL AND DESIGN FEES, |
| | MARKETING COSTS, OVERHEAD AND PROFIT; EXCLUDING ONLY |
| | LAND VALUE. VALUATION REFERENCES MAY INCLUDE THE LATEST |
| | PUBLISHED DATA OF NATIONAL CONSTRUCTION COST ANALYSIS |
| | SERVICES (MARSHALL-SWIFT, MEANS, ETC.), AS PUBLISHED BY |
| | INTERNATIONAL CODE CONGRESS. FINAL BUILDING PERMIT |
| | VALUATION SHALL BE SET BY THE BUILDING OFFICIAL. |
| | |
| | 3) SUBMIT A ROOF DIAGRAM WITH THE DIMENSIONS OF THE |
| | ROOF. SPECIFY THE SQUARE FOOT AREA OF THE SLOPED AND |
| | FLAT ROOF AREAS. SPECIFY THE PITCH OF THE SLOPED ROOF. |
| | THE ADDRESS OF THE PROJECT AND THE NAME AND SIGNATURE |
| | OF THE PERSON RESPONSIBLE FOR THE DRAWINGS IS REQUIRED |
| | TO BE ON THE DRAWING. FBC 107 |
| | |
| | 4) HI LIGHT OR CIRCLE THE ITEMS THAT APPLY TO THIS |
| | PROJECT IN THE POLYGLASS PRODUCT APPROVAL FOR THE FLAT |
| | ROOF. THIS WILL INCLUDE THE SYSTEM TYPE, THE FASTENING |
| | OPTIONS, THE DESIGN PRESSURE AND ANYTHING ELSE THAT |
| | APPLIES TO THE INSTALLATION. FBC 107 NOTE: PER |
| | LIMITATION #7 OF THE PRODUCT APPROVAL SIGNED AND SEALED |
| | ENHANCED FASTENING CALCULATIONS WILL BE REQUIRED IF THE |
| | DESIGN PRESSURES ARE NOT ADEQUATE FOR THE PERIMETER AND |
| | CORNER AREAS OF THE FLAT ROOF. |
| | |
