| Date |
Text |
| 2020-02-07 18:33:10 | RESIDENTIAL (R3) RE-ROOF BUILDING REVIEW COMMENTS |
| | CODE: FBC 6TH EDITION (2017) AND CITY AMENDMENTS. |
| | |
| | 1- FLAT ROOF FLORIDA PRODUCT APPROVAL FL16730-R24 |
| | SUBMITTED: CLEARLY MARK WHICH APPROVED ASSEMBLY IS |
| | GOING TO BE INSTALLED TO VERIFY COMPLIANCE WITH THE |
| | DESIGN PRESSURES OF SEC. R301.1 FBC-RESIDENTIAL. NOTE: |
| | IF THE SELECTED ASSEMBLY DOESN'T MEET THE DESIGN |
| | PRESSURES FOR ALL ROOF ZONES, THEN SIGNED AND SEALED |
| | RAS 117 CALCULATIONS ARE REQUIRED. |
| | |
| | 2- ROOF TILE AND ROOF TILE ADHESIVE PRODUCT APPROVALS |
| | SUBMITTED. CLEARLY MARK ADHESIVE PADDY SIZE AS REQUIRED |
| | BY CITY POLICY FOR ALL ROOFING PERMITS TO VERIFY |
| | COMPLIANCE WITH THE DESIGN PRESSURES OF SEC R301.2.1 |
| | FBC-RESIDENTIAL. |
| | |
| | 3- ROOF TILE CHANNEL METAL PRODUCT APPROVAL SUBMITTED. |
| | PROVIDE COMPLETE FLORIDA PRODUCT APPROVAL. PRODUCT |
| | APPROVAL SUBMITTED IS MISSING THE FLORIDA PRODUCT |
| | APPROVAL COVER PAGE. THIS PAGE IS REQUIRED BECAUSE IT |
| | SHOWS THE CURRENT CODE VERSION AND THE PRODUCT APPROVAL |
| | STATUS. CHAPTER 553 F.S. AND FAC 61G20-3.001. |
| | AND CLEARLY MARK ADHESIVE PADDY SIZE AS REQUIRED BY |
| | CITY POLICY FOR ALL ROOFING PERMITS TO VERIFY |
| | COMPLIANCE WITH THE DESIGN PRESSURES OF SEC R301.2.1 |
| | FBC-RESIDENTIAL. |
| | |
| | 4- ROOF TILE PRODUCT APPROVAL SUBMITTED. PROVIDE |
| | COMPLETE FLORIDA PRODUCT APPROVAL. PRODUCT APPROVAL |
| | SUBMITTED IS MISSING THE FLORIDA PRODUCT APPROVAL COVER |
| | PAGE. THIS PAGE IS REQUIRED BECAUSE IT SHOWS THE |
| | CURRENT CODE VERSION AND THE PRODUCT APPROVAL STATUS. |
| | CHAPTER 553 F.S. AND FAC 61G20-3.001. |
| | |
| | 5-- ROOF TILE UNDERLAYMENT SUBMITTED FOR ADHESIVE |
| | APPLICATIONS: CLEARLY MARK WHICH SPECIFIC UNDERLAYMENT |
| | TYPE AND UNDERLAYMENT SYSTEM IS GOING TO BE USED TO |
| | VERIFY COMPLIANCE WITH THE WIND LOADS SEC. R301.1 |
| | FBC-RESIDENTIAL. NOTE: SEE SEC. 5.6.4 OF FLORIDA |
| | PRODUCT APPROVAL SUBMITTED AND CLEARLY IDENTIFY |
| | UNDERLAYMENT SYSTEM TO BE USED. IF USING THE FRSA/TRI |
| | INSTALLATION MANUAL, THEN PROVIDE APPLICABLE TABLES AND |
| | CLEARLY MARK PROPOSED INSTALLATION AS REQUIRED BY CITY |
| | POLICY FOR ALL ROOFING PERMITS. |
| | |
| | |
| | WHEN RESUBMITTING PLANS PLEASE INDICATE THE REVISION & |
| | REMOVE ANY VOIDED SHEETS & REPLACE ANY PAGES AS |
| | NECESSARY. (NOTE: SUBMIT OLD DRAWINGS FOR REFERENCE). A |
| | TRANSMITTAL LETTER LISTING THE ORIGINAL REVIEW COMMENT |
| | NUMBER, WITH A DESCRIPTION OF THE REVISION MADE, |
| | IDENTIFYING THE SHEET OR SPECIFICATION PAGE WHERE THE |
| | CHANGES CAN BE FOUND WILL HELP TO EXPEDITE YOUR PERMIT. |
| | THANK YOU FOR YOUR ANTICIPATED COOPERATION. |
| | |
| | PLEASE FEEL FREE TO CONTACT ME IF YOU HAVE ANY |
| | QUESTIONS REGARDING THESE COMMENTS, |
| | JULIO GOMEZ |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | BUILDING DIVISION |
| | (561)805-6712 |
| | [email protected] |
| | |
