| Date |
Text |
| 2020-01-14 15:34:10 | FAILED |
| | |
| | 1) THE EXISTING LA FITNESS SIGN ON THE SOUTHERN FACE OF |
| | THE BUILDING UTILIZES THE ENTIRE SQUARE FOOTAGE |
| | PERMITTED FOR THIS FRONTAGE. IS THE EXISTING SIGN BEING |
| | REMOVED? IF SO, THEN THE COMMENTS BELOW APPLY. |
| | |
| | 2) THE FULL DIMENSION OF THE SIGN IS NOT PROVIDED ON |
| | THE PLANS. IN ACCORDANCE WITH THE ROSEMARY SQUARE |
| | TENANT SIGN CRITERIA REQUIRES THAT THE SIGN AREA IS |
| | CALCULATED USING THE MAXIMUM EXTENT OF THE SIGN. |
| | PROVIDE THE DIMENSION OF THE VERTICAL BAR BETWEEN LA |
| | AND FITNESS. |
| | |
| | 3) THE SIGN SQUARE FOOTAGE ALLOWANCE IS BASED ON THE |
| | LINEAR FRONTAGE OF THE TENANT SPACE. PROVIDE THE |
| | FRONTAGE DIMENSION OF THE ENTIRE LA FITNESS SPACE. |
| | |
| | 4) THE ROSEMARY SQUARE TENANT SIGN CRITERIA PERMIT A |
| | MAXIMUM LETTER HEIGHT OF 18 INCHES FOR A FASCIA SIGN |
| | UNLESS CITYPLACE RETAIL GRANTS A WAIVER II (MINOR |
| | PLANNED DEVELOPMENT AMENDMENT). THE WAIVER II MAY |
| | INCREASE THE SIGNS DIMENSION BY UP TO 25 PERCENT, SO |
| | THE LETTER HEIGHT (INCLUDING THE VERTICAL BAR) COULD BE |
| | UP TO 22.5 INCHES. |
| | |
| | 5) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE |
| | THAT REVERSE CHANNEL LETTERS ARE FABRICATED OUT OF |
| | ALUMINUM WITH A MINIMUM METAL THICKNESS OF .060 INCHES. |
| | THE SIGN DETAIL DOES NOT SPECIFY THE UNIT OF |
| | MEASUREMENT FOR THE ALUMINUM LETTERS. |
| | |
| | 6) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE THE |
| | STUD MOUNTS TO BE SERIES 316 STAINLESS STEEL ANCHOR |
| | BOLTS. PROVIDE VERIFICATION OF THIS REQUIREMENT ON THE |
| | PLANS. NOTE: IT APPEARS THAT ALUMINUM STUDS ARE BEING |
| | USED INSTEAD OF THE STAINLESS STEEL. |
| | |
| | 7) THE ROSEMARY SQUARE TENANT SIGN CRITERIA STOREFRONT |
| | TYPE 7 REQUIRES CITYPLACE RETAIL TO PROVIDE WRITTEN |
| | APPROVAL FOR THE PLACEMENT OF THE SIGN ON THE SECOND |
| | FLOOR. |
| | |
| | CONTACT ERIC SCHNEIDER @ (561) 822-1446 |
| | [email protected] |
| | |
