| Date |
Text |
| 2019-08-01 14:58:28 | RESIDENTIAL(R3) ADDITION/ALTERATION SECOND BUILDING |
| | REVIEW CHECKLIST. |
| | CODE: FBC 6TH EDITION (2017) AND CITY AMENDMENTS. |
| | |
| | |
| | NOTE: |
| | BUILDING REVIEW MAY BE APPROVED WITH PROVISO. PROVISO |
| | MEANS CONTRACTOR WILL SUBMIT REQUIRED INFORMATION AFTER |
| | THE PERMIT IS ISSUED BUT BEFORE INSPECTIONS TO AVOID |
| | CONFLICTS/DELAYS. REVISION FEES MAY APPLY. CONTRACTOR |
| | TO ADVICE IF PROVISO OPTION IS PREFERRED AT THIS TIME |
| | OR IF RE-SUBMITTING REQUIRED INFORMATION BEFORE PERMIT |
| | ISSUANCE. |
| | |
| | ***IF PROVISO OPTION IS PREFERRED, THEN THE ENERGY |
| | CALCULATIONS NEED TO BE SIGNED BY THE OWNER OR OWNER'S |
| | AGENT BEFORE ISSUING THE PERMIT. |
| | |
| | |
| | ORIGINAL COMMENT: |
| | 1- PROVIDE COMPLETE ENERGY CALCULATIONS (2 COPIES) AS |
| | REQUIRED BY SEC. 1106 FBC-EXISTING BUILDING AND SEC. |
| | R101.5 FBC-ENERGY CONSERVATION. |
| | NOTE: COORDINATE WITH PLANS (SEE ENERGY CODE NOTES ON |
| | SHEET A-01) AND PRODUCT APPROVALS SUBMITTED TO AVOID |
| | CONFLICTS/DELAYS. |
| | |
| | RESPONSE: |
| | ENERGY CALCULATIONS SUBMITTED: |
| | A) ENERGY CALCULATION FORM IS REQUIRED TO BE CERTIFIED |
| | AT THE BOTTOM OF THE FORM BY THE OWNER, THE OWNER'S |
| | ARCHITECT OR OTHER AUTHORIZED AGENT LEGALLY DESIGNED BY |
| | THE OWNER PRIOR TO RECEIVE THE PERMIT AS REQUIRED BY |
| | SEC. R103.1.1.2 FBC-ENERGY CONSERVATION, 6TH EDITION |
| | (2017). |
| | |
| | B) R-VALUE OF WALL INSULATION SPECIFIED ON ITEM #9 OF |
| | PAGE 1 OF 4 DOESN'T MATCH R-VALE SPECIFIED BY THE |
| | ARCHITECT OF RECORD ON PLANS/DETAIL AND ON ENERGY CODE |
| | COMPLIANCE INFORMATION SHOWN ON THE MIDDLE SECTION OF |
| | DRAWING A-01. REVISE AS REQUIRED TO MATCH. SEC. |
| | R101.5.1.1.2 FBC-ENERGY CONSERVATION. |
| | |
| | C) R-VALUE OF CEILING INSULATION SPECIFIED ON ITEM #10 |
| | OF PAGE 1 OF 4 DOESN'T MATCH R-VALE SPECIFIED BY THE |
| | ARCHITECT OF RECORD ON PLANS/DETAILS AND ON ENERGY CODE |
| | COMPLIANCE INFORMATION SHOWN ON THE MIDDLE SECTION OF |
| | DRAWING A-01. REVISE AS REQUIRED TO MATCH. SEC. |
| | R101.5.1.1.2 FBC-ENERGY CONSERVATION. |
| | |
| | D) PROVIDE COMPLETE INFORMATION ON TOP OF FORM, |
| | INCLUDING BUILDER 'S NAME. SEC. R101.5.1.1.2 FBC-ENERGY |
| | CONSERVATION. |
| | |
| | ORIGINAL COMMENT: |
| | 2- PROVIDE PRODUCT APPROVAL (2 COPIES) AS REQUIRED BY |
| | FAC 61G20-3.001 FOR: |
| | (NOTE: THIS MAY BE SUBMITTED LATER AS A DEFERRED |
| | SUBMITTAL). |
| | |
| | RESPONSE: |
| | ARCHITECT'S RESPONSE LETTER STATES THAT FLAT ROOF |
| | PRODUCT APPROVAL WILL BE SUBMITTED WITH SEPARATE |
| | ROOFING PERMIT.. THIS IS OK TO BE DONE WHEN GETTING THE |
| | ROOFING SUB-PERMIT. |
| | |
| | A)FLAT ROOF AND CLEARLY MARK WHICH APPROVED ASSEMBLY IS |
| | GOING TO BE INSTALLED TO VERIFY COMPLIANCE WITH THE |
| | DESIGN PRESSURES OF SEC. R301.2.1 FBC-RESIDENTIAL. |
| | NOTE: IF THE SELECTED ASSEMBLY DOESN'T MEET THE DESIGN |
| | PRESSURES FOR ALL ROOF ZONES, THEN SIGNED AND SEALED |
| | RAS 117 CALCULATIONS ARE REQUIRED. |
| | NOTE: FLAT ROOF PRODUCT APPROVAL NEEDS TO BE |
| | REVIEWED/APPROVED BY ARCHITECT OF RECORD PRIOR TO |
| | SUBMITTAL TO THIS OFFICE. |
| | |
| | WHEN RESUBMITTING PLANS PLEASE INDICATE THE REVISION & |
| | REMOVE ANY VOIDED SHEETS & REPLACE ANY PAGES AS |
| | NECESSARY. A TRANSMITTAL LETTER LISTING THE ORIGINAL |
| | REVIEW COMMENT NUMBER, WITH A DESCRIPTION OF THE |
| | REVISION MADE, IDENTIFYING THE SHEET OR SPECIFICATION |
| | PAGE WHERE THE CHANGES CAN BE FOUND WILL HELP TO |
| | EXPEDITE YOUR PERMIT. THANK YOU FOR YOUR ANTICIPATED |
| | COOPERATION. |
| | |
| | PLEASE, INSERT CORRECTED PAGES INTO THE SUBMITTAL AND |
| | REMOVE/VOID THE PREVIOUSLY REVIEWED SHEETS. |
| | PLEASE DON'T STAPLE OLD DRAWINGS/DOCUMENTS . SUBMIT OLD |
| | DRAWINGS/DOCUMENTS FOR REFERENCE. |
| | |
| | IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT |
| | JULIO GOMEZ |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | BUILDING DIVISION |
| | (561)805-6712 |
| | [email protected] |
| | |
