| Date |
Text |
| 2019-08-01 10:53:44 | PLUMBING COMMEMTS: APPROVED WITH PROVISO |
| | 1. PER WPB FBC 107.2.1 AND AS ALLOWED BY WPB FBC |
| | 107.3.4.1 DEFERRED SUBMITTALS, PROVIDE THE COMPLETE |
| | MANUFACTURER?S INSTALLATION MANUAL AND SPECIFICATIONS |
| | FOR THE TANKLESS WATER HEATER. HEATER'S EFFICIENCY MUST |
| | SHOW AS MIN .92EF TO MATCH THE R405 ENERGY FORM. THE KW |
| | AND AMPERAGE SHALL MATCH THE ELECTRICAL LOAD TABLE ON |
| | PLAN PAGE 7 OF 7. THE HEATER MUST BE ABLE TO PRODUCE |
| | HOT WATER 110F TO MULTIPLE FIXTURES AT THE SAME TIME. |
| | THIS SUBMITTAL SHALL BE SUBMITTED, APPROVED AND IN |
| | PLACE PRIOR TO FINAL INSPECTION. CONTRACTOR PROCEEDS AT |
| | HIS OWN RISK. |
| | 2. ALL WORK PER CITY CODES SUBJECT TO FIELD INSPECTOR?S |
| | APPROVAL. IT IS NOTED THAT A CODE COMPLIANT SANITARY |
| | RISER DIAGRAM HAS BEEN SUBMITTED. STRUCTURAL DESIGN AND |
| | FIXTURE LOCATIONS MAY WELL REQUIRE ADDITIONAL VENTRS |
| | AND PIPING CONFIGURATIONS. IT IS THE CONTRACTOR'S |
| | RESPONSIBILITY TO PROVIDE A CODE COMPLIANT |
| | INSTALLATION. |
| | 3. PROVIDE WATER HAMMER ARRESTORS AT WATER SUPPLIES TO |
| | WASHING MACHINE, ICE LINE AND DISHWASHER. FBC RES |
| | P2903.5 |
| | 4. THE COMBINED DISCHARGE FROM A DISHWASHER AND A ONE- |
| | OR TWO-COMPARTMENT SINK, WITH OR WITHOUT A FOOD-WASTE |
| | DISPOSER, SHALL BE SERVED BY A TRAP OF NOT LESS THAN |
| | 11/2 INCHES (38 MM) IN OUTSIDE DIAMETER. THE DISHWASHER |
| | DISCHARGE PIPE OR TUBING SHALL RISE TO THE UNDERSIDE OF |
| | THE COUNTER AND BE FASTENED OR OTHERWISE HELD IN THAT |
| | POSITION BEFORE CONNECTING TO THE HEAD OF THE FOOD |
| | WASTE DISPOSAL OR TO A TEE-WYE FITTING IN THE SINK |
| | TAILPIECE. FBC RES P2717.2 |
| | 5. SHUT OFF VALVES FOR THE UNDER COUNTER WASHING |
| | MACHINE AND ICE MAKER SHALL BE ACCESSIBLE. FBC RES |
| | P2903.9.4 |
