| Date |
Text |
| 2019-03-29 13:08:19 | BUILDING PLAN REVIEW |
| | 2017 FLORIDA BUILDING CODE, 6TH EDITION W/2017 WEST |
| | PALM BEACH AMENDMENTS TO THE FLORIDA BUILDING CODE, |
| | CHAPTER 1 ADMINISTRATION |
| | |
| | CHRISTOPHER S. THROOP, C.B.O. |
| | BUILDING PLANS EXAMINER, PX3169 |
| | 1&2 FAMILY PLANS EXAMINER, SFP306 |
| | CONSTRUCTION SERVICES DIVISION |
| | TEL: 561-805-6726 |
| | FAX: 561-805-6676 |
| | E-MAIL: [email protected] |
| | |
| | 1ST REVIEW |
| | RESULTS: DENIED |
| | YOUR SUBMITTAL IS DEFICIENT FOR THE REASONS LISTED |
| | BELOW. |
| | ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT |
| | |
| | 1. PROPOSED SCOPE OF WORK INCLUDES THE REMOVAL OF THE |
| | BOTTOM CORD OF EXISTING TRUSSES IN THE LOFT AREA AND |
| | BOTH BEDROOMS. |
| | 2. AN EVALUATION OF THIS PROPOSED WORK NEEDS TO BE |
| | PERFORMED BY A FLORIDA LICENSED PROFESSIONAL ENGINEER. |
| | THIS REPORT TO INCLUDE A SHORING PLAN. |
| | 107.2.1 INFORMATION ON CONSTRUCTION DOCUMENTS. |
| | |
| | 3. PROVIDE THE MANUFACTURERS INSTALLATION INSTRUCTIONS |
| | FOR THE PROPOSED SPRAYED INSULATION. IDENTIFY WHICH |
| | PRODUCT WILL BE USED TO OBTAIN THE REQUIRED R-20. |
| | |
| | 4. PROVIDE AN ENERGY SUBMITTAL. |
| | FBCE-R101.5.1.1 BUILDING THERMAL ENVELOPE ALTERNATIVE. |
| | AN ACCURATELY COMPLETED RESIDENTIAL BUILDING FORM R402 |
| | SHALL BE SUBMITTED TO THE BUILDING OFFICIAL TO |
| | DEMONSTRATE CODE COMPLIANCE BY THIS METHOD. |
| | |
| | FBCE-101.5.1.1.2 SIMULATED PERFORMANCE ALTERNATIVE. |
| | AN ACCURATELY COMPLETED RESIDENTIAL BUILDING FORM R405 |
| | (GENERATED BY COMMISSION APPROVED SOFTWARE) SHALL BE |
| | SUBMITTED TO THE BUILDING OFFICIAL TO DEMONSTRATE CODE |
| | COMPLIANCE BY SECTION 405. |
| | |
| | 5. PROVIDE DESIGN PRESSURES OF ALL EXTERIOR WINDOW AND |
| | DOOR OPENINGS. |
| | |
| | 6. ARCHITECT'S SIGNATURE IS A COPY. |
| | FBC 107.1 IF THE DESIGN PROFESSIONAL IS AN ARCHITECT, |
| | INTERIOR DESIGNER, LANDSCAPE ARCHITECT, OR ENGINEER |
| | LEGALLY REGISTERED UNDER THE LAWS OF THIS STATE |
| | REGULATING THE PRACTICE OF ARCHITECTURE OR INTERIOR |
| | DESIGN AS PROVIDED FOR IN CHAPTER 481, FLORIDA |
| | STATUTES, PART I, OR LANDSCAPE ARCHITECTURE AS PROVIDED |
| | FOR IN CHAPTER 481, FLORIDA STATUTES, PART II, OR |
| | ENGINEERING AS PROVIDED FOR IN CHAPTER 471, FLORIDA |
| | STATUTES, THEN HE OR SHE SHALL AFFIX HIS OR HER |
| | OFFICIAL SEAL TO SAID DRAWINGS, SPECIFICATIONS AND |
| | ACCOMPANYING DATA, AS REQUIRED BY FLORIDA STATUTE. |
| | |
| | 7. PROVIDE PRODUCT APPROVALS FOR WINDOW MULLIONS. |
| | FBC 107.3.4 ? PROVIDE PRODUCT APPROVALS FOR THOSE |
| | PRODUCTS WHICH ARE REGULATED BY FAC RULE 9N-3 REVIEWED |
| | AND APPROVED IN WRITING BY THE DESIGNER OF RECORD. |
| | SPECIFICALLY, PROVIDE WINDOW MULLIONS SUBMITTALS. |
| | |
| | 8. PLAN PAGE A-3 STATES EXTERIOR FRAMED WALLS SHALL |
| | HAVE FIBERGLASS 5.5 BATT INSULATION. THE EXTERIOR WALL |
| | SECTION ON PLAN PAGE A-9 STATES THE INSULATION SHALL BE |
| | SPRAY APPLIED. PLEASE CLARIFY. |
| | |
| | PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED |
| | MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS. |
| | WHEN RESUBMITTING, IT IS HELPFUL TO PROVIDE A RESPONSE |
| | LETTER ADDRESSING EACH ITEM ALONG WITH THE CITY |
| | RE-SUBMITTAL FORM. PLEASE, ADDITIONALLY, INSERT |
| | CORRECTED PAGES INTO SUBMITTAL AND LEAVE THE PREVIOUSLY |
| | REVIEWED SHEETS DETACHED. |
| | |
| | |
| | |
| | |
