| Date |
Text |
| 2018-02-23 16:08:11 | BUILDING PLAN REVIEW |
| | 2017 FLORIDA BUILDING CODE, 6TH EDITION W/2010 WEST |
| | PALM BEACH AMENDMENTS TO THE FLORIDA BUILDING CODE, |
| | CHAPTER 1 ADMINISTRATION |
| | |
| | CHRISTOPHER S. THROOP, C.B.O. |
| | PLANS EXAMINER, PX3169 |
| | CONSTRUCTION SERVICES DIVISION |
| | TEL: 561-805-6726 |
| | FAX: 561-805-6676 |
| | E-MAIL: [email protected] |
| | |
| | 1ST REVIEW |
| | RESULTS: DENIED |
| | ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT |
| | |
| | YOUR SUBMITTAL IS DEFICIENT FOR THE REASONS LISTED |
| | BELOW. |
| | DUE TO THE DEFICIENCIES OF THIS PLAN, A COMPLETE AND |
| | THOROUGH REVIEW CANNOT BE PERFORMED AT THIS TIME. UPON |
| | RE-SUBMITTAL, ADDITIONAL COMMENTS MAY BE MADE. |
| | |
| | DOORS |
| | |
| | 1. PROVIDE PLAN SHOWING LOCATION OF PROPOSED DOORS WITH |
| | DIMENSIONS OF ROUGH OPENINGS. IDENTIFY EXPOSURE OF EACH |
| | OPENING. IF NO CHANGES ARE TO BE MADE TO THE ROUGH |
| | OPENINGS, PROVIDE STATEMENT THAT DOORS WILL BE LIKE FOR |
| | LIKE. IF ROUGH OPENINGS ARE ALTERED, PROVIDE FRAMING |
| | PLAN PER FBCR CHPT. 6. |
| | 2. DESIGN WIND LOADS FOR EACH OPENING SHALL BE BASED ON |
| | FBCR CHPT. 3. |
| | 4. DESIGNER TO SELECT MODEL OF DOOR TO BE INSTALLED FOR |
| | EACH OPENING FROM LIST OF AVAILABLE MODELS IN PRODUCT |
| | APPROVALS. |
| | 6. PROVIDE INSTALLATION INSTRUCTIONS FOR EACH MODEL OF |
| | DOOR SELECTED. |
| | 7. DESIGNER TO PRINT NAME AND SIGN PLAN. |
| | 8. PRODUCT APPROVALS TO BE REVIEWED AND APPROVED BY |
| | DESIGNER. |
| | |
| | WINDOWS |
| | |
| | 1. PROVIDE PLAN SHOWING LOCATION OF WINDOWS WITH |
| | DIMENSIONS OF ROUGH OPENINGS. IF NO CHANGES ARE TO BE |
| | MADE TO THE ROUGH OPENINGS, PROVIDE STATEMENT THAT |
| | WINDOWS WILL BE LIKE FOR LIKE. IF OPENINGS ARE ALTERED, |
| | PROVIDE FRAMING PLAN PER FBCR CHPT. 6. |
| | 2. DESIGN WIND LOADS FOR EACH OPENING SHALL BE BASED ON |
| | FBCR CHPT. 3. |
| | 3. PROVIDE PRODUCT APPROVALS FOR WINDOW MULLIONS OR |
| | SHOW LOCATION OF STRUCTURAL COLUMNS FOR MULTIPLE WINDOW |
| | LOCATIONS. |
| | 4. DESIGNER TO SELECT MODEL OF WINDOW TO BE INSTALLED |
| | FOR EACH OPENING FROM LIST OF AVAILABLE MODELS IN |
| | PRODUCT APPROVAL. |
| | 5. PROVIDE INSTALLATION INSTRUCTIONS FOR EACH MODEL OF |
| | WINDOW SELECTED. |
| | 6. DESIGNER TO PRINT NAME AND SIGN PLAN. |
| | |
| | PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED |
| | MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS. |
| | |
