| Date |
Text |
| 2017-01-17 12:42:22 | 1) TWO SETS OF PLANS ARE REQUIRED TO BE SUBMITTED FOR |
| | REVIEW. ONLY ONE SET HAS BEEN SUBMITTED. WPB AMEND. TO |
| | FBC SEC.107.1. |
| | 2) PLANS THAT HAVE BEEN PREPARED BY AN ENGINEER AND |
| | SUBMITTED FOR PUBLIC RECORD SHALL BEAR THE SIGNATURE, |
| | DATE AND SEAL OF THE ENGINEER PER THE FL. ADMIN. CODE |
| | RULE 61G15-23.001. SEE BELOW: |
| | |
| | 61G15-23.001 SIGNATURE, DATE AND SEAL SHALL BE AFFIXED. |
| | (1) A PROFESSIONAL ENGINEER SHALL SIGN, DATE AND SEAL: |
| | (A) ALL FINAL PLANS, PRINTS, SPECIFICATIONS, REPORTS, |
| | OR OTHER DOCUMENTS PREPARED OR ISSUED BY THE LICENSEE |
| | AND BEING FILED FOR PUBLIC RECORD; |
| | |
| | (4) ADDITIONAL REQUIREMENTS FOR PLANS OR PRINTS, |
| | ENGINEERING SPECIFICATIONS AND CALCULATIONS, AND |
| | ENGINEERING REPORTS OR OTHER DOCUMENTS. WHEN AN |
| | ENGINEER SIGNS, DATES AND SEALS ANY OF THE FOLLOWING |
| | TYPES OF DOCUMENTS PLANS OR PRINTS UNDER THE PROVISIONS |
| | OF SECTION 471.025, F.S., AND SUBSECTION (1) OF THIS |
| | RULE, THE FOLLOWING ADDITIONAL INFORMATION MUST BE |
| | INCLUDED: |
| | (A) PLANS AND PRINTS. EVERY SHEET WITHIN THE PLANS AND |
| | PRINTS MUST BE SIGNED, DATED AND SEALED BY THE |
| | PROFESSIONAL ENGINEER IN RESPONSIBLE CHARGE. |
| | 1. A TITLE BLOCK SHALL BE USED ON EACH SHEET OF PLANS |
| | OR PRINTS AND SHALL CONTAIN THE PRINTED NAME, ADDRESS, |
| | AND LICENSE NUMBER OF THE ENGINEER WHO HAS SIGNED, |
| | DATED AND SEALED THE PLANS OR PRINTS. |
| | 2. IF THE ENGINEER SIGNING, DATING AND SEALING |
| | ENGINEERING PLANS OR PRINTS IS PRACTICING THROUGH A |
| | DULY AUTHORIZED ENGINEERING BUSINESS; THE TITLE BLOCK |
| | SHALL CONTAIN THE PRINTED NAME, ADDRESS AND CERTIFICATE |
| | OF AUTHORIZATION NUMBER OF THE ENGINEERING BUSINESS. |
| | |
| | TIM LARGE |
| | CHIEF PLUMBING INSPECTOR |
| | PLUMBING PLAN REVIEW |
| | 561-805-6692 |
| | [email protected] |
| | |
| | |
| | |
| | |
