| Date |
Text |
| 2016-06-10 11:09:42 | RESIDENTIAL (R3) RE-ROOF, BUILDING REVIEW COMMENTS. |
| | CODE: FBC 5TH EDITION(2014) |
| | |
| | 1- FLAT ROOF: |
| | A) FLORIDA PRODUCT APPROVAL FL1654-R19 SUBMITTED IS NOT |
| | APPROVED YET. THE APPLICATION STATUS SAYS "PENDING FBC |
| | APPROVAL". NEED TO PROVIDE FLORIDA PRODUCT APPROVAL |
| | THAT IS APPROVED. FAC61G20-3.002(33). |
| | |
| | B) PROVIDE COMPLETE EVALUATION REPORT. SUBMIT THE FIRST |
| | 9 PAGES OF THE EVALUATION REPORT AND PAGE SHOWING THE |
| | SELECTED ASSEMBLY. FAC 61G20-3.002(33). |
| | |
| | |
| | C) SELECTED ASSEMBLY W-138 SUBMITTED SHOWS MAXIMUM |
| | DESIGN PRESSURES OF -90 PSF.. THIS BUILDING IS LOCATED |
| | IN EXPOSURE "C". THE CORNER DESIGN PRESSURES ARE HIGHER |
| | THAN -90 PSF. SEC. R301.1 FBC-RESIDENTIAL, 5TH EDITION |
| | (2014). BONDED ASSEMBLIES DON'T ALLOW RATIONAL |
| | ANALYSIS. SEE NOTE: #9 ON PAGE 2 OF 45 OF EVALUATION |
| | REPORT. |
| | |
| | D) BONDED ASSEMBLIES REQUIRE UPLIFT TESTING TO VERIFY |
| | COMPLIANCE WITH THE DESIGN PRESSURES OF SEC. R301.1 |
| | FBC-RESIDENTIAL. SEE LIMITATION 5.11 ON PAGE 5 OF 5 OF |
| | EVALUATION REPORT. |
| | |
| | 2- METAL ROOFING: |
| | A) PROVIDE CURRENT FLORIDA PRODUCT APPROVAL. FLORIDA |
| | PRODUCT APPROVAL FL12744-R2 SUBMITTED WAS REVISED BY |
| | FL12744-R3. FAC 61G20-3.002(33). |
| | |
| | B) PROVIDE COMPLETE INSTALLATION INSTRUCTIONS AND |
| | EVALUATION REPORT FOR THE SPECIFIC METAL ROOF SELECTED |
| | FORM FLORIDA PRODUCT APPROVAL FL-12744-R3. FAC |
| | 61G20-3.002(33). |
| | |
| | 3- VALUATION DECLARED IN THE PERMIT APPLICATION IS TOO |
| | LOW. VALUATION TO INCLUDE ALL LABOR, MATERIALS AND |
| | CONTRACTOR'S OVERHEAD AND PROFIT AS REQUIRED BY SEC. |
| | 109.3 CITY AMENDMENTS. |
| | |
| | IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT |
| | JULIO GOMEZ |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | (561)805-6712 |
| | [email protected] |
