| Date |
Text |
| 2016-04-11 08:15:22 | BUILDING PLAN REVIEW |
| | W. P. B. PERMIT: 16031416 |
| | ADD: 1793 PALM BEACH LAKES BLVD |
| | CONT: ANDERSON MOORE |
| | TEL: 561-662-1819 |
| | E-MAIL: [email protected] |
| | |
| | 2014 FLORIDA BUILDING CODE W 2014 WEST PALM BEACH |
| | AMENDMENTS TO THE FLORIDA BUILDING CODE, CHAPTER 1, |
| | ADMINISTRATION |
| | |
| | 2014 EXISTING BUILDING CODE LEVEL II 701.3 COMPLIANCE. |
| | ALL NEW CONSTRUCTION ELEMENTS, COMPONENTS, SYSTEMS, AND |
| | SPACES SHALL COMPLY WITH THE REQUIREMENTS OF THE |
| | FLORIDA BUILDING CODE, BUILDING. |
| | |
| | 1ST REVIEW |
| | DATE: |
| | ACTION: DENIED |
| | |
| | NOTE: PALM BEACH OUTLET MALL: BEFORE PLAN SUBMITTAL TO |
| | THE BUILDING DEPARTMENT, THE PLANS ARE SUPPOSED TO HAVE |
| | THE STAMPED LANDLORD APPROVAL BY NEW ENGLAND |
| | DEVELOPMENT PALM BEACH OUTLETS SKY GROUP TENANT |
| | COORDINATOR. |
| | PB OUTLET MALLS: |
| | A LETTER FROM THE QUALIFIER OF BOTH THE SHELL |
| | CONTRACTOR (EMJ CORPORATION) AND TENANT BUILD-OUT |
| | CONTRACTOR MUST BE PROVIDED BEFORE TENANT BUILD-OUT |
| | PERMIT CAN BE ISSUED, IF THE TENANT BUILD-OUT |
| | CONTRACTOR WISHES TO START WORK BEFORE THE SHELL WORK |
| | HAS RECEIVED A CERTIFICATE OF COMPLETION, AGREEING THEY |
| | WILL WORK TOGETHER TO ACHIEVE CODE COMPLIANCE. THESE |
| | DOCUMENTS WILL NEED TO BE SIGNED BY THE QUALIFIER. |
| | PLEASE PROVIDE THE PERMIT NUMBER, ADDRESS WITH SUITE |
| | NUMBER WITHIN THE DOCUMENT. |
| | |
| | 1) THE PERMIT APPLICATION INDICATES UNDER THE |
| | DESCRIPTION OF WORK TENANT BUILD OUT. THE PLANS DO NOT |
| | SHOW ANY WORK BEING COMPLETED AS A TENANT BUILD OUT. |
| | 2014 FLORIDA BUILDING CODE W 2014 WEST PALM BEACH |
| | AMENDMENTS TO THE FLORIDA BUILDING CODE, CHAPTER 1, |
| | ADMINISTRATION 107.3.5 MINIMUM PLAN REVIEW CRITERIA FOR |
| | BUILDINGS. THE EXAMINATION OF THE DOCUMENTS BY THE |
| | BUILDING OFFICIAL SHALL INCLUDE THE FOLLOWING MINIMUM |
| | CRITERIA AND DOCUMENTS: A FLOOR PLAN; |
| | LIFE SAFETY PLAN |
| | OCCUPANCY GROUP AND SPECIAL OCCUPANCY REQUIREMENTS |
| | SHALL BE DETERMINED. |
| | MINIMUM TYPE OF CONSTRUCTION SHALL BE DETERMINED (SEE |
| | TABLE 503) |
| | LIFE SAFETY SYSTEMS SHALL BE DETERMINED AND SHALL |
| | INCLUDE THE FOLLOWING |
| | REQUIREMENTS: |
| | OCCUPANT LOAD AND EGRESS CAPACITIES |
| | FIRE SPRINKLERED OR NOT? |
| | OCCUPANCY LOAD/EGRESS REQUIREMENTS SHALL INCLUDE: |
| | OCCUPANCY LOAD |
| | GROSS |
| | NET |
| | MEANS OF EGRESS |
| | EXIT ACCESS |
| | EXIT |
| | EXIT DISCHARGE |
| | DOORS |
| | EMERGENCY LIGHTING AND EXIT SIGNS |
| | |
| | 2) IN THE REAR OF THE TENANT AREA THERE ARE 2 DOORS |
| | MARKED AS EXITS BUT THERE IS A LOADING DOCK ON THE |
| | EXTERIOR OF THE BUILDING. IS THIS A RAISED LOADING |
| | DOCK, THERE ARE NO STAIRS SHOWN ON THE LOADING DOCK. |
| | 107.2.1.3 ADDITIONAL INFORMATION IS REQUIRED. |
| | |
| | 3) SHEET LS01 INDICATES NOT MORETHAN 50% OF THE |
| | OCCUPANT LOAD CAN TRAVEL THROUGH THE STORAGE ROOM. NO |
| | STORAGE ROOM IS SHOWN ON THE PLANS. 2014 FBC-B 1014.2 |
| | EXCEPTION # 2: MEANS OF EGRESS ARE NOT PROHIBITED |
| | THROUGH STOCKROOMS IN GROUP M OCCUPANCIES WHEN ALL OF |
| | THE FOLLOWING ARE MET: |
| | |
| | 2.1. THE STOCK IS OF THE SAME HAZARD CLASSIFICATION AS |
| | THAT FOUND IN THE MAIN RETAIL AREA; |
| | |
| | 2.2. NOT MORE THAN 50 PERCENT OF THE EXIT ACCESS IS |
| | THROUGH THE STOCKROOM; |
| | |
| | 2.3. THE STOCKROOM IS NOT SUBJECT TO LOCKING FROM THE |
| | EGRESS SIDE; AND |
| | |
| | 2.4. THERE IS A DEMARCATED, MINIMUM 44-INCH-WIDE (1118 |
| | MM) AISLE DEFINED BY FULL- OR PARTIAL-HEIGHT FIXED |
| | WALLS OR SIMILAR CONSTRUCTION THAT WILL MAINTAIN THE |
| | REQUIRED WIDTH AND LEAD DIRECTLY FROM THE RETAIL AREA |
| | TO THE EXIT WITHOUT OBSTRUCTIONS. |
| | |
| | 4) THE PLANS DO NOT INDICATE THE USE OF CASH WRAPS? |
| | 2014 FBC-ACCESS. CODE 904.3.2 COUNTER. |
| | THE COUNTER SURFACE HEIGHT SHALL BE 38 INCHES (965 MM) |
| | MAXIMUM ABOVE THE FINISH FLOOR OR GROUND. THE TOP OF |
| | THE COUNTER EDGE PROTECTION SHALL BE 2 INCHES (51 MM) |
| | MAXIMUM ABOVE THE TOP OF THE COUNTER SURFACE ON THE |
| | AISLE SIDE OF THE CHECK-OUT COUNTER. |
| | 904.4 SALES AND SERVICE COUNTERS. |
| | SALES COUNTERS AND SERVICE COUNTERS SHALL COMPLY WITH |
| | 904.4.1 OR 904.4.2. THE ACCESSIBLE PORTION OF THE |
| | COUNTER TOP SHALL EXTEND THE SAME DEPTH AS THE SALES OR |
| | SERVICE COUNTER TOP. |
| | |
| | 5) THE PLANS DO NOT SHOW WHAT TYPE OF MERCANTILE STORE |
| | IS GOING TO OCCUPY THIS SPACE, IF DRESSING ROOM/ |
| | CHANGING ROOMS ARE TO BE CREATED THEN COMPLIANCE WITH: |
| | 2014 FBC-ACCESS. CODE : |
| | 803.2 TURNING SPACE. TURNING SPACE COMPLYING WITH 304 |
| | SHALL BE PROVIDED WITHIN THE ROOM. |
| | |
| | 5A) 803.3 DOOR SWING. DOORS SHALL NOT SWING INTO THE |
| | ROOM UNLESS A CLEAR FLOOR OR GROUND SPACE COMPLYING |
| | WITH 305.3 IS PROVIDED BEYOND THE ARC OF THE DOOR |
| | SWING. |
| | |
| | 5B) 803.4 BENCHES. A BENCH COMPLYING WITH 903 SHALL BE |
| | PROVIDED WITHIN THE ROOM. |
| | |
| | 5C) 803.5 COAT HOOKS AND SHELVES. COAT HOOKS PROVIDED |
| | WITHIN THE ROOM SHALL BE LOCATED WITHIN ONE OF THE |
| | REACH RANGES SPECIFIED IN 308. SHELVES SHALL BE 40 |
| | INCHES (1015 MM) MINIMUM AND 48 INCHES (1220 MM) |
| | MAXIMUM ABOVE THE FINISH FLOOR OR GROUND. |
| | |
| | 5D) 903.1 GENERAL. BENCHES SHALL COMPLY WITH 903. |
| | |
| | 5E) 903.2 CLEAR FLOOR OR GROUND SPACE. CLEAR FLOOR OR |
| | GROUND SPACE COMPLYING WITH 305 SHALL BE PROVIDED AND |
| | SHALL BE POSITIONED AT THE END OF THE BENCH SEAT AND |
| | PARALLEL TO THE SHORT AXIS OF THE BENCH. |
| | |
| | 5F) 903.3 SIZE. BENCHES SHALL HAVE SEATS THAT ARE 42 |
| | INCHES (1065 MM) LONG MINIMUM AND 20 INCHES (510 MM) |
| | DEEP MINIMUM AND 24 INCHES (610 MM) DEEP MAXIMUM. |
| | |
| | 6) WHEN RESUBMITTING PLANS PLEASE INDICATE THE REVISION |
| | & REMOVE ANY VOIDED SHEETS & REPLACE ANY PAGES AS |
| | NECESSARY. A TRANSMITTAL LETTER LISTING THE ORIGINAL |
| | REVIEW COMMENT NUMBER, WITH A DESCRIPTION OF THE |
| | REVISION MADE, IDENTIFYING THE SHEET OR SPECIFICATION |
| | PAGE WHERE THE CHANGES CAN BE FOUND WILL HELP TO |
| | EXPEDITE YOUR PERMIT. THANK YOU FOR YOUR ANTICIPATED |
| | COOPERATION. |
| | |
| | JAMES A. WITMER CBO |
| | SENIOR COMMERCIAL COMBINATION PLANS EXAMINER |
| | CONSTRUCTION SERVICES DIVISION |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | TEL: 561-805-6715 |
| | FAX: 561-805-6676 |
| | E-MAIL: [email protected] |
| | |
| | |
| | 903.4 BACK SUPPORT. |
| | THE BENCH SHALL PROVIDE FOR BACK SUPPORT OR SHALL BE |
| | AFFIXED TO A WALL. BACK SUPPORT SHALL BE 42 INCHES |
| | (1065 MM) LONG MINIMUM AND SHALL EXTEND FROM A POINT 2 |
| | INCHES (51 MM) MAXIMUM ABOVE THE SEAT SURFACE TO A |
| | POINT 18 INCHES (455 MM) MINIMUM ABOVE THE SEAT |
| | SURFACE. BACK SUPPORT SHALL BE 21/2 INCHES (64 MM) |
| | MAXIMUM FROM THE REAR EDGE OF THE SEAT MEASURED |
| | HORIZONTALLY |
| | |
| | |
| | |
