| Plan Review Notes For Permit 16031390 |
| Permit Number |
16031390 |
|
| Review Stop |
R |
| Sequence Number |
2 |
|
| Notes |
| Date |
Text |
| 2016-06-06 18:25:30 | 1- PROVIDE PRODUCT APPROVAL (2 COPIES)AS REQUIRED BY | | | FAC 61G20-3.002(33) FOR: | | | ORIGINAL COMMENT: | | | A) ROOF TILES. ONLY FLORIDA PRODUCT APPROVAL FL3505-R7 | | | COVER PAGE WAS SUBMITTED. NEED TO PROVIDE COMPLETE | | | PRODUCT APPROVAL INFORMATION INCLUDING THE TECHNICAL | | | DRAWINGS SHOWING THE TILE THAT WAS APPROVED. | | | RESPONSE: SECTION 4.2.2 OF ESR-1775 REPORT SUBMITTED | | | REQUIRES WIND UPLIFT RESISTANCE DESIGN FOR BASIC WIND | | | SPEEDS ABOVE 100MPH. PROVIDE DESIGN CRITERIA. DESIGNER | | | OF RECORD TO SPECIFY ROOF TILE FASTENING METHOD AS | | | REQUIRED BY SEC. 107.2.1.2 CITY AMENDMENTS. IF | | | SPECIFYING SCREWS, THEN SPECIFY TYPE AND NUMBER OF | | | SCREWS. IF SPECIFYING ADHESIVE, THEN PROVIDE PRODUCT | | | APPROVAL FOR THE ROOF TILE ADHESIVE. | | | | | | A(1) ROOF TILE ADHESIVE IF SPECIFIED BY THE DESIGNER OF | | | RECORD. | | | | | | ORIGINAL COMMENT: | | | 2- ENGINEER OF RECORD TO REVIEW AND APPROVE IN WRITING | | | (NOT SIGNING AND SEALING) ALL PRODUCT APPROVALS AS | | | REQUIRED BY SEC. 107.3.4.1 CITY AMENDMENTS. | | | RESPONSE: PRODUCT APPROVALS WERE APPROVED BY THE | | | ARCHITECT NOT THE ENGINEER OF RECORD. THE ENGINEER IS | | | THE ONE RESPONSIBLE FOR THE STRUCTURAL DESIGN. PRODUCT | | | APPROVALS NEED TO BE REVIEWED BY THE STRUCTURAL | | | ENGINEER TO VERIFY COMPLIANCE WITH THE STRUCTURAL | | | DESIGN. | | | | | | | | | ROOF TILE FLORIDA PRODUCT APPROVAL SUBMITTED FL3505-R7 |
|
